Fj20 Alternator Wiring

[OUTATIME]

need some help wiring up my rb20 into my dr30.

using a l series alternator, ive got it all wired up apart from the ground (-) wire. just the single little spade type plug that goes on the back of the alternator. not sure which 1 it is on the fj20 loom. possible yellow wire on its own all i can see being a possibility.

can some 1 shed some light on the subject? or take a pic of their alternator wiring would b ace

cheers...

[Boof]

I'll have a suss out for ya tomorrow sometime after i wake up!

[OUTATIME]

thanks man that would b much appreciated if u could do that.

still cnt get spark 2 this pos rb20 as well!

cheers...

[OUTATIME]

still havin trouble with this. just that one wire on the back of the alternator. also have an rb30 alternator as well if thats any easier or some 1 has already wired 1 up in a dr before.

wanna get this thing runnin 100% b4 i take it on track

cheers...

[gazza750]

http://www.skylinesaustralia.com/forums/pi...hl=r30+fuse+box

try this link

[OUTATIME]

cheers mate, been thru bout all the posts cnt find anything.

just wanna no what wire is the alternator charge light. if some 1 can send me a pic of bak of the alternator in the car (dr30 fj20et) or a wiring diagram. can only find ecu wiring diagrams not engine or actuall car looms etc

cheers

[QWK32]

dont know if this will help you but on some alternators, you can use a multimeter to find the charge light wire (your talking about the one for the dash light aren't you?). from memory it will have -ve polarity when the alternator isn't charging (car isn't running) and +ve once the alternator is charging.

[OUTATIME]

cheers man, yea been thru the plugs in the engine bay with ign on and test light to ground so would make the charge light light up when i found it but no luck. can only find 1 wire down where the that big plugs where the gearbox loom and oil sender wires go that leads no where. hook the test light up 2 that and get all the lights on the dash working. so not sure if thats it cos thought just the batt light should light up. if that makes any sense.

[OUTATIME]

all good, was that wire. would of help if i had a charged battery so could see the lights actually light up when was testing em!