Jump to content
SAU Community

Recommended Posts

im after a shifter for a rb box but i am a little confused bout the different types of shifters

i have seen pictures on ebay of nismo solid shifters and the r34 has a kink in it but r33 ones dont

so is it possible to get pictures of stock shifters from a r33 and r34 rb25det shifters so i can compare them?

thanks in advance!!

What one are you after?? If you are looking for an R33 one I bought one by accident (meant to get the R34 one), will sell less than advertised on ebay if that is what your after..

PM me if you are interested mate.

ok i couldnt find any pics on stock shifters but on ebay there are 2 nismo solid shifters

r33

http://i57.photobucket.com/albums/g219/jdm...hifterrn580.jpg

r34

http://i57.photobucket.com/albums/g219/jdm...shifterer34.jpg

now can anyone confirm if the r34 really does have that kink in the stick?

cheers

Yes 34 does have a kink in it and it is needed

thanks heaps mate!

=)

thats the answer i needed to kno!

=)

couple more questions... is the kink to put the shifter further back? or further forwards?

and i assume rb25 boxes from a r33 are the same from a r34?

The kink brings it into the cabin but you dont even notice it because of the covers. If u have a 34 you need 34 box as they came out with pull style clutch and from memory there are a few updates with regards to syncro rings etc that make them last longer and stronger. i also think the nylon bush on the end of the selector may be a different size but not 100%

Edited by cankas
  • 4 years later...

hello,

I know this thread is a bit of a blast from the past (but it shows I've used the search button!)

Are the shifters interchangeable without any problems?

I have an R33 Box in a VL with an R33 Nismo shifter which sits fine, but if I go to an R34 box (for pull clutch setup) will the R33 shifter still sit in ok?

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 馃槈. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 馃槏.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 馃檹 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 馃槈. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 馃槏 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
  • Create New...