Jump to content
SAU Community

Recommended Posts

Hi guys,

I've got this problem where my refridgerant container keeps emptying out in about a week. I was just checking out the engine bay the other day and found the coolant container dry as a bone. Went out n bought some pre mixed stuff, and then filled it up. now it's almost gone again. There are no leaks or anything coming from the car, my driveway is spotless. Anybody know what could be happening?

Link to comment
https://www.sau.com.au/forums/topic/24522-coolant-issues/
Share on other sites

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

if u cant see where the coolant is going u may have a cracked head and it goes to the exhaust manifold .have u r radiator cap pressure tested it may come out of there to the overflow and u dont see it cause it only does it while very hot .

Link to comment
https://www.sau.com.au/forums/topic/24522-coolant-issues/#findComment-523660
Share on other sites

I'm wondering - there is a hole in the top near the cap to let too much overflow out isn't there? Couldn't it just be evaporating out the hole over time? Mine seems to lose coolant over time too but whenever I check the radiator, it's always full to the brim.

Link to comment
https://www.sau.com.au/forums/topic/24522-coolant-issues/#findComment-524214
Share on other sites

I've got a hose from radiator to overflow bottle, but I think there's another hole which is square that doesn't go anywhere. I can't remember anymore, I'm going to have another check when I get home. Maybe I'm just deluded (or maybe the overflow hose is split or something).

Link to comment
https://www.sau.com.au/forums/topic/24522-coolant-issues/#findComment-524222
Share on other sites

oh okay.....I got a black plastic (maybe 10mm) hose runnin from just below the rad cap (l/h/s) to the top of the o/flow bottle but I'm pretty sure there isn't another hole.......if there was how could the system keep pressure & once hot you'd see steam pissin out of the hole!

Link to comment
https://www.sau.com.au/forums/topic/24522-coolant-issues/#findComment-524224
Share on other sites

Originally posted by RedLineGTR

Is the radiator low on fluid??

Check your oil. See if their is a milky colour within the oil.  

Is thier any smoke coming out the exhuast when the car is at normal operating temp.

This happened exactly same as me! filled the coolant bottle and next thing i noticed all gone! no leaks whatsoever. I even checked the radiator its all full. My car do smoke though during warmup but not normal operating temp.. is this normal?

Link to comment
https://www.sau.com.au/forums/topic/24522-coolant-issues/#findComment-524375
Share on other sites

Yeah it's normal :)

I even think (not 100% sure) that when the engine is cold, the moisture in the air doesn't get hot enough to completely boil into invisible steam as it goes through the engine, as thus comes out as visible vapour.

Link to comment
https://www.sau.com.au/forums/topic/24522-coolant-issues/#findComment-524394
Share on other sites

SO its not just me that has issues with leaking coolant...

Trust me, there is no way a whole overflow bottle of coolant can evaporate even over quite a long period. If there is even a few centimetres difference in the level of the overflow bottle after u drive a few times, u have problem.

I changed my water pump, which fixed mine a bit. But then i discovered that small amounts are also coming from the head gasket area, so check this.

my head will be removed 2morrow to check where the leak is coming from...

Look around cylinder 6 for signs of leakage, because the metal is hot in that area coolant can leak out and evaporate without u noticing, but it leaves a stain.

Link to comment
https://www.sau.com.au/forums/topic/24522-coolant-issues/#findComment-524429
Share on other sites

guys , if u fill the bottle above the max mark u'll loose it very quick form the overflow on the bottle itself ( the bottle has an overlow ) .u should fill the radiator to the top and the bottle should be between the nin and max mark .

nrage33 if u loose coolant form the overflow u should be able to see it in the engine bay area .,

as for steam ( not smoke though ) coming out of the exhaust especialy when the outside temp is very cold thats normal in any car new or old until the cold exhaust pipes get to normal temp u 'll see plenty of steam clouds of it when very cold .once the ex pipe gets hot no more steam .

the hot exhaust air hits the cold pipe and u have steam , u'll notice when u start the engine the steam will start a few seconds after as soon as hot exhaust comes out the next couple of minutes more steam heaps more and then will start to lessen until it all goes .

Link to comment
https://www.sau.com.au/forums/topic/24522-coolant-issues/#findComment-525093
Share on other sites

Originally posted by siksII

Trust me, there is no way a whole overflow bottle of coolant can evaporate even over quite a long period. If there is even a few centimetres difference in the level of the overflow bottle after u drive a few times, u have problem.

I had another look and there is an extra square hole at the top like wrxhoon says. I reckon over a period of months (like mine has been) water could easily evaporate out that hole, because it gets pretty warm in there.

The thing is though, I don't know how easily coolant evaporates. So if you filled it up with coolant it's entirely possible that it would never evaporate no matter how hot your engine got. Unfortunately I don't have any spare coolant to put in the overflow bottle, I forgot to put some in there when I changed my coolant recently.

I agree though that losing a few cm after a couple of drives is definitely wrong.

Link to comment
https://www.sau.com.au/forums/topic/24522-coolant-issues/#findComment-525122
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah, my moulds and seals are 32 years old now. I think I will continue to not use a pressure washer on it.
    • I hear the old "I'd never use a pressure washer on my motorbike" BS in the dirtbike community too.  The only people that have had a problem from using a pressure washer on anything are the people that aren't using them properly.  If you hold the wand any more than 45 cms away from pretty much anything (radiators, wiring connectors, paint, etc) you aren't going to cause any damage.  We've had detailers wreck moulds and seals on cars at work before and the only reason why is they held the pressure washer too close and on the one spot for too long.  If you have 5% more brain power than a detailer then you know not to not do that and you'll never have a problem.
    • I'm pretty much healed up post surgery so I spent another almost full day out in the shed re-arranging everything to make room for all of the shit that I've taken off the car.  I need to get everything off the floor and away from the car for when I start making a massive mess stripping off the remaining body deadener and then for the the painting process.  Almost got the shed to a point now where I feel I can actually start working on the car again (clean shed clean mind or something!).  Almost 11 years of accumulated car parts, building supplies, tools, junk, etc have taken a long time to get in some sort of order again!  Most stuff is now boxed up and in the back shed if it's not car related.  Most people would still be horrified walking into my shed but it's significantly better than it was before!   For those that saw my separate post the other day, yeah I ordered one.... This version- I convinced myself to stop being a clown, wake up to yourself and realise it will take you 5 weeks to make one by which stage you're over working on the car again...  Maybe I am getting on top of my "mental ailments" and making smarter choices.... $1450 delivered which will take my miserable half-dutch arse a few days to get over having spent that much!  If I don't have a use for it straight away after my car is off it I might even see if there is a "rental market" for them.  See if anyone wants to hire it for a period of time.  $25 a week or something like that.  I'll worry about that when my car is actually ready to come off it though as that might be a while away!! There's now no excuses now for not ending up with an underside you could eat off! Away for kids sport the next few weekends so hopefully can get the rotisserie assembled ready to go for the car to go straight on it the next available weekend.    
    • I always use my Karcher, but it's only a little one that I picked up from Supercheap  The only issue I ever had with a pressure washer was when I was a kid cleaning coaches, they had a hi-po industrial sized petrol jobbie that would strip paint if you got to close I saying this, we have a fairly high power washer at work with a diesel powered heater that sprays water at about 60°c, it works great for removing old wax and road grime on the underbody after some foam cannon action, albeit from a "stand off" distance of a few feet
    • Sorry no - The sandtrap adventure ended the day, happened at the end of the last session. At that time I wasn't hearing any weird noises nor were the brakes shuddering anymore. It was only when watching the videos that I remembered I had these sounds early on!
×
×
  • Create New...