Jump to content
SAU Community

Phat Jap Fgk 3" --> 3.5" Extremely High Flowing System + 550cc Injectors + R33 5 Stud + Z32

nigelswazi
 Share

Recommended Posts

nigelswazi Mentor

nigelswazi

Posted
Posted

Got the following parts I no longer need after being defected and changing a few bits:

Location - Adelaide Contact - PM or SMS 0404998591

Japanese Fujitsubo Giken FGK Super High Flow Cat Back System to suit R33 GTS-t,

First up is my Japanese Fujitsubo Giken FGK Super High Flow Cat Back System to suit R33 GTS-t, will fit R34 with slight shortening and flange flipping round at cat end. This exhaust is extremely high flowing starting with 3" mandrel bend piping up to the flange and at this point the exhaust expands out to 3.5" piping all the way to the tuff cannon muffler with awesome tip. This makes clearance that bit better at the centre of the car for speed bumps etc whilst maintaining maximum flow.

I bought this system for $700 from local wreckers but then spent $200 on a new centre muffler as the old one had I small hole I didn't notice upon purchase for which I still have the receipt and warranty on that part. This exhaust is flanged in the centre making transportation a breeze I can undo the flange if required by buyer to make fitting into a normal car easier. Pics are below the black appearance to the lower half of the exhaust is from it being spray matt black so as not to draw attention from the cops I can remove the paint if required but I recommend it. Note silencer is not included in sale this was borrowed to clear defect.

Price - $400

fgkexhaustxi6.th.jpgthpix.gif

fgkexhaustangle2gf8.th.jpgthpix.gif

fgkmuffleryl5.th.jpgthpix.gif

fgkexhaustexpandingdp7.th.jpgthpix.gif

--------------------------------------------------------------------------------------------------------------------------------------

Venom 550cc Injectors Straight Fit for SR20 and RB25

4 x Venom 550cc Injectors Straight Fit for SR20 and RB25 complete in SR20DET fuel rail complete with pressure regulator (injectors can be removed for buyer if required). These injectors were bought new and used for a couple of months on my gf's car but have now been removed as part of stripping car. These are a straight fit injector no need to cut off plugs etc just install rail if using on SR20 or injectors if using on RB and away you go.

Price - $375

550injectorsqc2.th.jpgthpix.gif

--------------------------------------------------------------------------------------------------------------------------------------

R33 Front Hubs and Uprights

Selling a pair of R33 Front Hubs and Uprights perfect for conversion in excellent condition.

Price - $150 pair

uprightsti0.th.jpg

--------------------------------------------------------------------------------------------------------------------------------------

Z32 AFM Plug + Clip & Loom

Selling a Z32 AFM Plug complete with installation clip and around 25cm of loom to make installation easy. I will also include a guide on fitting to CA, SR and RB powered Nissan vehicles.

Price - $20

-----------------------------------------------------------------------------------------------------------------

Location - Adelaide

Contact - PM or SMS 0404998591

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • r32-25t
      R32 Gtr Long Term Love, Now Project

      By r32-25t · Posted

      Took it for a drive to do some logs, I’m pretty sure my voltage issues and electrical noise issues are gone, I’ve sent a log to Adam and am waiting to hear back with confirmation  att.K23U9eHyiEJxixH6y1__GQfuqK0EgIoDgQFTs9G8x_w.mp4   idle video from that day just because 
    • MBS206
      How old is too old for tyres?

      By MBS206 · Posted

      Went looking at mine, reading off the tyre, presumably these are 1st week of 2003. Still hold air (I haven't had to pump them up in over 12 months!)     I couldn't quickly find the date on the front tyres, they were fitted around 2008 to the rims, so probably not quite as old, but they have a lot more dry rot cracks in them. Still hold air.
    • MBS206
      How old is too old for tyres?

      By MBS206 · Posted

      I am now intrigued to go check the dates on the tyres on my Skyline... We need a game of who has the oldest tyre still holding a car up, and successfully holding air (for longer than a 2 weeks I feel is successful air holding).   I feel your tyres may be beating mine
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Ok, still waiting for a date to get the cams installed on the MX5, why so long, because MX5 Mania has received a few new sets of different cams with different specs for the MZR and are currently trialling them, and working out what is best for 2.5 "powers" with stock internals, in the end if I go bigger than the Kelford stage 1 cams I'll need to look at the valve springs  Hopefully I'll get the news on them next week As for the boot of the car getting fixed, I hopefully pick it up early next week, I was sweating on picking it up yesterday but, meh, it was not to be, so ne weekend cruising for me
    • Ozdavroz
      How old is too old for tyres?

      By Ozdavroz · Posted

      Ok got some old tyres for you guys...my car has been sitting around un-driven for about 6 years now. I had it on the original rims with the shitty compliance tyres it got it with back in 2006, which were manufactured in 2004... Sidewalls eventually rotted and split open, obviously no air in them and the rims were holding the car up. Just swapped them with some 17" Work rims and tyres which are probably 10+ years old too but at least holding air
×
×
  • Create New...