Jump to content
SAU Community

Recommended Posts

I remember reading on here somewhere and i have done searches but can't find what i'm looking for. I have the regency defect and my rego has expired. As we know you can't register a defected car. However, if you have the defect signed off and a regency appointment you can drive untill that date, the standard procedure when the car has rego.

I thought I read, that if you go to the regency park office with the paperwork they can issue you with some type of rego so the car can be driven.

I have the defect paperwork and has been signed off in the past. I have made several calls and been told that this isn't the case. Can anyone help??

Link to comment
https://www.sau.com.au/forums/topic/245579-regency-related/
Share on other sites

yes you can, but it is classed as a permit rego

once ur car is cleared u take the reciept saying u passed regency and the reciept saying u paid 180 or whatever u paid for ur rego to the desk and they make up a sticker for you no questions asked,

can be tricky if you not sure wat to do or u get sum1 that doesnt know wat there doin at the desk

i only did this like two months ago, so yes it can be done.....

Link to comment
https://www.sau.com.au/forums/topic/245579-regency-related/#findComment-4272153
Share on other sites

so is your defect signed off and cleared or you going to regency? :P

why would you have an appointment to go to regency if its signed off and cleared already?

my rego run out while on defect and i had to buy stupid day passes each time i went to a workshop with it.

Edited by Inline 6
Link to comment
https://www.sau.com.au/forums/topic/245579-regency-related/#findComment-4272276
Share on other sites

yea trader plates im pretty sure work, but who the hell gonna lend you those

I got some when i took my skyline to the compliance workshop a couple weeks ago, just need to know the right people (Car dealers) lol

Link to comment
https://www.sau.com.au/forums/topic/245579-regency-related/#findComment-4272810
Share on other sites

$48 day pass.

any rego place.

tip: get the paper work first and fill it out. dont go line up for 23423 hours talk then line up again .

need to be really precise with where you are taking the car also.

workshop etc. regency etc. what roads.

Link to comment
https://www.sau.com.au/forums/topic/245579-regency-related/#findComment-4273842
Share on other sites

I had an appointment and was signed off at the cop shop but had an accident a week later and now have only got the car back from the panel beater. I don't want a day pass but be able to drive around untill my new appointment date.

so is your defect signed off and cleared or you going to regency? :blink:

why would you have an appointment to go to regency if its signed off and cleared already?

my rego run out while on defect and i had to buy stupid day passes each time i went to a workshop with it.

Link to comment
https://www.sau.com.au/forums/topic/245579-regency-related/#findComment-4274278
Share on other sites

On my way to Regency. I had an appointment and was signed off at the cop shop but had an accident a week later and now have only got the car back from the panel beater. I don't want a day pass but be able to drive around untill my new appointment date.

so is your defect signed off and cleared or you going to regency? :blink:

why would you have an appointment to go to regency if its signed off and cleared already?

my rego run out while on defect and i had to buy stupid day passes each time i went to a workshop with it.

Link to comment
https://www.sau.com.au/forums/topic/245579-regency-related/#findComment-4274283
Share on other sites

Yeah, not 100% sure on this but if they find out the trader plates don't actually belong to you or you aren't a part of the company you can get into serious trouble

Not ture customers use trader plates all the time for test drives, I would have said im taking it for a test drive and said the car yard i used.

Link to comment
https://www.sau.com.au/forums/topic/245579-regency-related/#findComment-4276266
Share on other sites

ok then. say your double defected (didnt pass first time regency)

can you still go to the cop shop and have your stuff ticked off (strut braces. suspension etc)?

then get your car rego'd till your inspection ?

Link to comment
https://www.sau.com.au/forums/topic/245579-regency-related/#findComment-4279660
Share on other sites

ok then. say your double defected (didnt pass first time regency)

can you still go to the cop shop and have your stuff ticked off (strut braces. suspension etc)?

then get your car rego'd till your inspection ?

You need proof that you've fixed/repaired/replaced the items in question on the defect.

Link to comment
https://www.sau.com.au/forums/topic/245579-regency-related/#findComment-4281832
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So recently at the track had experienced a loss of throttle after a period of WOT after installing the emtron ecu, recently did some logging to troubleshoot the issue and found the ECU was cutting due to a low oil pressure issue. Going over the log can see that while accelerating at 4k rpm will see 100 PSI of pressure and holding steady at that level until getting off the throttle which then after can see as low as 25 PSI at 3-4k rpm and will recover back to a normal level after that.   Wondering if anyone has an idea what could be the cause as it just feels abit strange and i dont feel like it could be a sensor issues just due to it clearly sitting at a good pressure until off throttle, in the attached can see a 3rd and 4th gear pull but can even perform great through 3 and 4 gears of WOT but still once off throttle and getting back on it will see pressure drop.
    • There are a few different ways of doing it. I'm currently running two 1000cc pre-TB nozzles and PWM the pump for control. I'll be moving over to a constant pressure system and direct port. I'll run the pump off a regular relay, have it cycle on roughly 5psi before I start injecting to build pressure and then PWM a WMI solenoid (It's basically an injector that can take a lot of pressure and not corrode with water and meth.) The solenoid feeds the 6 direct port ~200cc nozzles. I'll also keep one ~250cc pre-TB nozzle to help keep IAT's in check.  Safety will be a little different as well. I used to use a pressure switch but will be moving over to a pressure sensor between my solenoid and nozzles. I'll trigger my solenoid and if I don't see specific pressure within a specific timeframe (e.g 100psi within a second, 175psi within 2 seconds), I kill it and revert back to non WMI maps the same way I did it before with 4D in Haltech. I was just figuring out the timers in my ecu last night. They made that a little more complicated than I would have liked... I wish Haltech offered a larger set of logic/math functions like other ecu's do. I can't do very much with just AND's and OR's.  I've been asked to do fuel/ignition mapping on a medium bore engine at work in May (192L V16). Being the only programmer in my region and having went and opened my mouth about knowing the ins and outs of fuel/ignition mapping, I have now been deemed an expert. Fun fun. The entirety of the logic and algorithms are programmed in C on a PLC. As I spend more time figuring it all out, I like what I see and eventually I may consider doing the same as a pet project to replace my ecu.   
    • This would be interesting, would you feed it via a 2nd row of injectors? Or just usual WMI nozzles?
    • Cut sump up and extend. Win win 😂 
    • All, What's the recommended torque for the 1/2 head studs for RB30 twin cam conversion with RB26 head?  
×
×
  • Create New...