Jump to content
SAU Community

Recommended Posts

large551.jpg

large538.jpg

large552.jpg

large539.jpg

Following strong demand from The Tuners Group's racing customers for a system of products to set up cars for multiple drivers in endurance events, we are pleased to announce The Enduro System.

In an endurance event with multiple drivers and driver changes, different drivers want to use their favourite steering wheel for their stints behind the wheel in enduros, and different drivers have different driving positions, due to factors that cannot be changed such as different driver heights and arm reach lengths etc.

In the past, your only option was to come up with a compromise - a compromise on which steering wheel to use, and a compromise on driving position.

But you end up with a driver position that is not correct for any of the drivers, and a frequently a steering wheel that only one driver likes.

Put any driver in a compromised, uncomfortable driving position, and the end result is always increased fatigue, and less driver endurance.

And anyone who has ever competed in an endurance race knows that as soon as you get fatigued, your concentration drops, lap times get slower, you lose ground against your opposition, and safety is compromised.

So we sat down and thought "there simply must be a better way", and set about solving the problem ...

Like most engineering problems, if you work hard enough, you eventually find an elegant solution.

The result is a package of products which we've nicknamed "The Enduro System".

Learn more about "The Enduro System" at ...

http://www.tunersgroup.com/The_Enduro_System.html

- Adam



  • Similar Content

  • Latest Posts

    • From the pictures I have when doing the job the flywheel is the same diameter, I don't think they're playing weird tricks like putting weights at the outer diameter to increase flywheel inertia or anything like that. The OEM flywheel is definitely heavier, but it's not a huge difference. Quoted weight savings of the clutch is 2 kg so I can't imagine the flywheel being lighter than ~7 kg. Kind of regret not weighing it before the clutch went into the car but as far as driveability goes I have no complaints.
    • HKS trigger kit should be very easy to integrate with a Link. It's a 36-2 crank trigger. Hard part is finding the motivation to take off the timing belt and everything on the front of the engine to install it. You also need to cut out a hole in the oil pump housing so the sensor can read the trigger wheel. Changing out the cam sensor for a 24 tooth setup is probably good enough but as others have mentioned depending on what underlying assumptions are changed it becomes more of a problem. Reading the crank state off of the cam is an abstraction that works in the general case, but if you have an edge case it makes less and less sense. There is a GTX2860 gen 2 that can take a compact 5 bolt housing so it's direct bolt on but I'm not 100% sure of what's involved. Peak compressor efficiency drops off a bit on these turbos vs -5s, 77% vs 73% but you get way, way wider region of operation. The -5s have a really strange surge line in their compressor map that is all over the place. If you think the hot side on the -5s aren't open enough you can try the Tomei T550B turbos which a local tuner seems to be happy with:
    • i need a complete tail light for my R33 GTR if you have please let me know.
    • I need a great maintenance workshop around Idaho, if you know one please let me know..
    • Hello friends, i have a good friend in Canada that looking for a good condition 1993 GTR around him please if one or know someone around you that is willing to let it go please let me know so that i can inform him.....Thanks
×
×
  • Create New...