Jump to content
SAU Community

Hit My Car On Gutter, Steering Is Ruined, Whats The Problem?


Recommended Posts

ey, it was raining and i hit the gutter and went over it.. there was no external damage however my steering became alot lighter and it wasnt straight, so basically i had to steer right to go straight.

anyone know what the problem is and how much it is to fix?

Thanks!

Link to comment
Share on other sites

ey, it was raining and i hit the gutter and went over it.. there was no external damage however my steering became alot lighter and it wasnt straight, so basically i had to steer right to go straight.

anyone know what the problem is and how much it is to fix?

Thanks!

How hard did you hit it? If your lucky, it might just need a wheel alignment, however, considering that its lighter, not just veering to the left, it could be more serious, bent something etc. I'd probably take it into a Tyre shop and get them to look at it.

Link to comment
Share on other sites

ey, it was raining and i hit the gutter and went over it.. there was no external damage however my steering became alot lighter and it wasnt straight, so basically i had to steer right to go straight.

anyone know what the problem is and how much it is to fix?

Thanks!

wheel alignments are cheap.....so thats if your lucky

i recall someone who driften onto the gutter...

which required changing most of the suspension.....if thats the case, make sure u start saving up

Link to comment
Share on other sites

had a laugh at your title..lol.

i was driving in the wet once, lost it on a corner over corrected and hit a gutter head on. at least when i hit it i made sure the wheels were pointing straight before humping it. blew a tyre and buggered alignment. only cost me a new pair of tyres and two wheel alignments cause the first place couldnt do the job properly.

take it to a reputable tyre place and get them to check and do a wheel alignment. quite simple really. if somethings broke or bent they will tell you and you will find out how much to fix. they should not fix it without asking you firs tso you wont be surprised with a larger than average bill. I stress take it to a reputable suspension place. if you are in melb i can reccomend you one or two.

Link to comment
Share on other sites

i scraped my rim to the max too LOL

i hope its the allignment then,

but its steering alot lighter, anyone know what it is? :S

Also, what about the axle? Few mates of mine say i coulda barred that,

also i buckled a rim, can i buy single ones somewhere?

I'm in melbourne,

IS beaurepairs a good place to go?

Edited by Luckieee
Link to comment
Share on other sites

thought u were going to get it looked @ today hence i recommended a tire shop, cos theyre normally open 7days. if you are getting it looked @ during the week , take it to a suspension place that does alignments. where u from?

Like i said if something were to be bent its probably a lower control arm, or steering rack. Hope your rack hasnt snapped?? could explain the light steering. if so i wouldnt be driving.

Just have a look under the front car and inspect

Link to comment
Share on other sites

where can i get cheap alignment done? :D

i guess you'r not heeding my adivce to go to a proper suspension place hey?

Traction tyres rowville is where i take my car to or you can try Centreline if your on the other side of town. The guys at Traction tyres are a class act and will tell you what needs to be done to fix things and nothing more. $66-$77 for front and back from memory. Should be cheaper for just a front end alignment.

g/luck with it.

Link to comment
Share on other sites

so they got they told u that your control arm is damaged and charged for a wheel alignment!! if your control arm is bent, they wouldn't be able to align your car properly. i would take it elsewhere, ie try the ones recommended by the guys above. and if its confirmed that your contorl arm is bent get it fixed and demand a refund for the dodgy work done @ beaurepairs. if u have any issues call the dept of fair trading or the beaurepairs head office.

if you need a control arm, check out some of the wrecks in the for sale section. or call some local import wreckers.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • That's true. However, this problem has started since the tuning. First time with the return journey from the tuning. But yes, the pipe was clogged with dirt and rust. That was certainly due to age
    • Great info @tidi0x  Will definitely be handy for others and maybe me if I decide to keep the shit box H pattern.
    • Bumping this up one last time.... I wanted to follow up on the clutch slave issue. I realized that what the issue comes down to is the pocket is flat milled, and the cylinder does not want rest flat. So in order to mount it correctly you will need to make a spacer for the fingers so the cylinder is floating. I took two plates of aluminum, drilled some holes and was good. I did still need to make the relief cuts in the bell housing, as even with the spacer the bleed section still interferes. The OE bell housing the mounting holes are raised from the housing.       
    • If the event in USA goes ahead will be interesting as it seems the rules will get more cars over here. Apparently the track is laguna seca too. Yeah s15, if I get a the lower dash trims, centre console and change front cross member to standard LCA position will fit clubsprint. See how rules are as i would rather do complete widebody than a bolt on flare to run the 295 with proper clearance.
    • If the car is legal height I can't see it being an issue. Found a thread on reddit that might offer some insight.   I got a ticket from a copper in QLD for my S15 being too low. They had this wheel thing on a stick that they put under the car and it hit my exhaust. Anyhow went to an exhaust shop to get the exhaust tucked up/hung a little higher and I wound the coilovers up a smidge. Don't think I even had to go back to the police station unlike when I got defected for having a carbon bonnet when I brought the S15 from the ACT to QLD and had to replace it and then rock up at a police station and have a yougish female officer who knew nothing about cars confirm that I had changed bonnets. Should have just painted the carbon bonnet yellow to match the rest of the car lol
×
×
  • Create New...