Jump to content
SAU Community

P/s Hose.

66yostagea

By 66yostagea,
in Four Door Family & Wagoneers

 Share

Recommended Posts

66yostagea Grand Master

66yostagea

Posted
Posted

One thing I noticed was the small hose off the side of the reservoir, was loose and leaking at both ends. The OEM wire clips were done up as tight as possible. The clips had no more slack and had bitten into the hose, so I decided to get a piece of new hose. After taking the outer off, the inner has a few definate sets in it to fit neatly. Is it possible to use a piece of straight hose??? Or is it back to Nissan for genuine???

Link to comment
https://www.sau.com.au/forums/topic/246184-ps-hose/
Share on other sites
66yostagea Grand Master

66yostagea

Posted
  • Author
Posted
One thing I noticed was the small hose off the side of the reservoir, was loose and leaking at both ends. The OEM wire clips were done up as tight as possible. The clips had no more slack and had bitten into the hose, so I decided to get a piece of new hose. After taking the outer off, the inner has a few definate sets in it to fit neatly. Is it possible to use a piece of straight hose??? Or is it back to Nissan for genuine???

Need an answer here. I am ready to put the turbo on but dont want to do it b4 i get this hose in.

Any help????

Link to comment
https://www.sau.com.au/forums/topic/246184-ps-hose/#findComment-4282729
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      Stock rb25det neo questions

      By Dose Pipe Sutututu · Posted

      That's right, simple but works. Run out of load? Rescale the table lol. Want to be lazy and not rescale? Drag the K
    • IM-32-FK
      Feedback on Carbonetics: R34 GTT cooling panel

      By IM-32-FK · Posted

      @DraftySquash @Duncan he's not talking about the part that sits against the radiator support, he’s talking about the lip that sits towards the front outside of the car. anyway I had a look at other cooling panels and came across this one https://justjap.com/products/carbing-radiator-cooling-panel-plate-nissan-skyline-r34-gt-t?variant=37829684134087&currency=AUD&utm_source=google&utm_medium=organic&utm_campaign=Advanced feed&utm_content=Carbing Radiator Cooling Panel Plate fits Nissan Skyline R34 GT-T (Coupe)&srsltid=AfmBOoonzPDKqe9NgKi5U0AkFc2XvbXETGmNWvfNcyBT5DUZagMYHg9DZ70 if you take notice it’s the same shape.  well thankfully the justjap listing has a description and it says : - Nissan Skyline R34 GT-T Coupe (M/T -07/2000) this means it’s specifically for a s2. S2’s have different front bars to s1 so that lip with the 3 holes are *probably* mounting points for the s2 bar. im not 100% sure but im almost certain it will still fit a s1 bar       
    • MBS206
      Stock rb25det neo questions

      By MBS206 · Posted

      Everyone is too used to learning from places like HPA "how to tune" and what to expect at what point, rather than being able to see "The computer says I'm in cell with Row = 8, column =4, and I can see my fuel is lean, so lets add more" Everyone wants "real units", which helps for someone picking it up for the first time and seeing how bad the tune is if they're not used to touching it.   However, I think for most of us who want to play with it, you're 100% right, we're only needing to learn about it for OUR CAR. Which makes it great, and we don't need to care what the real values are, we just need to know which cell it is, that's causing the lean or rich point, or that we want more ignition timing or less. But again, everyone wants everything super you beaut and nearly self tuning, with VE maps, and a billion compensations...   Though then there's me over here when I'm doing reverse engineering work just reading data in hex format that most people couldn't work anything out from. Yet I can see what's going on.
    • blind_elk
      [VIC] RB20DET Block

      By blind_elk · Posted

      Gone.
    • EC04
      R34 Skyline Knee Pads

      By EC04 · Posted

      €1.300    €
×
×
  • Create New...