Jump to content
SAU Community

Recommended Posts

While Quality is up there at least the Jap stuff fits, Eg the Hypertune Plenum above and the High Octane Sump that leaks.

I would be Pissed if I spent 3k on a plenum and it didnt fit straight on.

i agree - i guess not all aust made bits are at the same caliber as jap stuff
Yes, although the design of the hi octane sump is good, it really is very poorly finished. Casting is VERY rough and like you say a lot of them leaked in the beginning. I suppose attention to detail is what makes Japanese products eye candy to us all. Having said that, not all Japanese products are as well developed as some found in the States and here in Oz.
Ive never seen the Hi octane sump up close, I guess with the Plenum, Its not hard to source some shorter studs, but if you are paying labour by the hour it would be a pain.

Hey Fellas dont get me wrong....

If the wasnt good enough I wouldnt have used it. Living in Japan is like being a kid in a candy store. Being able to source parts at good and discount prices I could have used the Japanese gear but I did some research and saw the response guys were getting with the Hypertune plenum and went that road. It definitely wasnt about saving coin.

Yeah there was slight problems which were easily sorted out but if you want to crack the Japanese market it just has to be perfect as the Japanese customer wants and expects and has perfection. You got to remember the Japanese customer has been brainwashed over and over into brand buying and its a extremely hard market to crack and its pretty hard to sell them something that doesnt have some famous brand on it.

The Aussie gear is right up there but just need that final polish off of quality to crack their market.

Thing is at the end of the day the proof was in the pudding..The combo of the Garrett -5's , the Hypertune plenum, some very cutom head work and HKS Step 2 engine kit has produced a package that has impressed the shit out of the HKS mechanics. They reckon its a very torquey beast and they were most impressed how well it held max boost and its very wide torque range compared to what they usually get out of the 2.8

One part that had them pooing in their pants with interest was the RIPS custom Oil Catch can/washer bottle. They reckon the workmanship was awesome and bummer was we couldnt use it as had run the inlet pipe for the Hypertune plenum through the inner guard and ended up not bing able to fit the RIPS custom Oil Catch can/washer bottle.

Its now been sold to a Japanese friend of mine and is currently being installed in a HKS Step 0 build.

Marcuscatchtankfinished001.jpg

Marcuscatchtankfinished002.jpg

On a very happy note.. I got confirmation the car has arrived in Australia and now time to to get it cleared through customs and off to get complied..

  • Replies 286
  • Created
  • Last Reply

Top Posters In This Topic

Definatly not saying the parts are crap, Just a little suprised that they are not perfect given the price.

Hey mate wasnt saying you were. Just wanted to clarify that I wasnt saying they were inferior products, which by far ,they are not.

I was lucky with the price as the bottom fell out of the Aussie dollar and buying with yen the aussie parts were bloody good value.

One part that had them pooing in their pants with interest was the RIPS custom Oil Catch can/washer bottle. They reckon the workmanship was awesome and bummer was we couldnt use it as had run the inlet pipe for the Hypertune plenum through the inner guard and ended up not bing able to fit the RIPS custom Oil Catch can/washer bottle.

Its now been sold to a Japanese friend of mine and is currently being installed in a HKS Step 0 build.

Marcuscatchtankfinished001.jpg

Marcuscatchtankfinished002.jpg

On a very happy note.. I got confirmation the car has arrived in Australia and now time to to get it cleared through customs and off to get complied..

all of robs work @ rips racing is top notch!

RH9 HIGH POWER ALTERNATOR

2010412916.jpg

2010412912.jpg

HEAVY DUTY EARTH POINTS

NO 1

2010412912.jpg

NO 2

2010412918.jpg

NO 3

2010412919.jpg

CUSTOM BUILT HEADY DUTY DRIVESHAFTS

2010412925.jpg

2010412926.jpg

2010412927.jpg

PRETTY MUCH ALL TOGETHER

2010412928.jpg

2010412929.jpg

2010412930.jpg

2010412931.jpg

2010412932.jpg

2010412933.jpg

ENGINE BAY AND SOME INSIDE PICS

020.jpg

021.jpg

022.jpg

023.jpg

024.jpg

026.jpg

015.jpg

018.jpg

THE LITTLE BUTTON IS FOR 8 SECOND SCRAMBLE BOOST

019.jpg

017.jpg

FINISHED AND READY TO SEND TO OZ !!

025.jpg

027.jpg

028.jpg

029.jpg

014.jpg

012.jpg

011.jpg

010.jpg

009.jpg

So this stage of the car is finished and the car is in the process of getting back to my hot little hands..Not too long to go.

Got a bunch more parts to go on including gearbox, carbon tailshaft, ARC intercooler, Nismo 400R kit (not sure if I'll fit this or sell it) more carbon goodies etc etc.

By the way the wheels in the pics Advan TC 2's and some quite stretched 265 tyres. Just put on for shipping as the rims will probably up for sale !

Its now about getting it all nice and pretty and sorting a bullet proof drive train and more importantly....driving the bloody thing !!

Stay tuned for more updates as she is a work in progress

While Quality is up there at least the Jap stuff fits, Eg the Hypertune Plenum above and the High Octane Sump that leaks.

I would be Pissed if I spent 3k on a plenum and it didnt fit straight on.

It does bolt straight on, 12 bolts are used instead of factory studs. Lots of Japanese stuff is fitted by removing factory fixings and using another fastener to bolt it up. Doesn't take much brain power really, some of the questions the Japanese were asking us for help with on this build was a bit puzzling as it was really pretty straight forward. Maybe Mark and Pete at Hypertune should supply a scratchy sketch, some instructions in another language and a dozen bolts with their plenumn's to keep up with the Jappo's excellent engineering.

Edited by blitzxtr
CUSTOM PIPING WITH ADAPTER For HKS BlOW OFF VALVE

[/b]2010412903.jpg

2010412907.jpg

2010412908.jpg

2010412909.jpg

2010412910.jpg

As an owner of a full HKS piping kit i found that although the kits look fantastic in an engine bay, The finish especially on the inside is nothing short of atrocious. For the premium yen that you pay for the full kits (156450yen for bnr32 and 139450 for 33/34 GTR) one would expect the product to be of a high standard. Instead, the finsh was not much better than the $300 Chinese knockoffs which can be bought on Ebay. Like the Chinese kits, they really need to be extrude honed to be considered finished. Maybe the kits have changed since the last few that i brought in for friends etc, but in my opinion the Trust GReddy piping kits are a far better kit.

EDIT: If those 2 pieces of pipe that you have for your blow off valve are from an off the shelf kit then it looks like HKS have lifted their game. They definitely look much cleaner inside! Sorry for the rant!

Edited by AtomicBomberMan
It does bolt straight on, 12 bolts are used instead of factory studs. Lots of Japanese stuff is fitted by removing factory fixings and using another fastener to bolt it up. Doesn't take much brain power really, some of the questions the Japanese were asking us for help with on this build was a bit puzzling as it was really pretty straight forward. Maybe Mark and Pete at Hypertune should supply a scratchy sketch, some instructions in another language and a dozen bolts with their plenumn's to keep up with the Jappo's excellent engineering.

Jeez someones taken their sarcastic medication lately.

Ok, using standard studs it does not bolt straight up as you can tell by the pictures and second, no bolts were supplied with the plenum.

As you say it doesnt take common sense to figure what to do and I'd say that the Japanese would know a thing or to about modifying parts . Maybe you should do a trip over there and have a suss of a few workshops to see their level of workmanship.

As for the questions the guys from HKS were asking, well they were concerned and always asking questions, as they knew the car was going back to OZ and would have to pass compliance as a personal import and therefore were super over cautious about doing work before checking and making sure whether it was going to be ok for oz.

The plenum was not a straight bolt on using standard mounting studs, as it needs different bolts to mount , also it needed sensor mount fitted and last the throttle linkage mount was not a straight bolt up as mine was slightly askew and needed the throttle linkages adjusted to suit, something they said they dont need to do to the Jap plenums.

Overall it was not anything major but like I said, they asked questions first before going ahead with any work and yes they figured out straight away what the needed to do but wanted to be sure by asking.

As for asking questions..who is us ??

I asked a very few certain people on this site who I new had used the parts in case and at the time asked and respected their opinions regarding using such parts and mounting etc..

Some answers I got included cutting original bolts to suit, which I thought was great engineering.

If you read the thread, you will see my whole aim of using the Aussie parts was to show the Japanese that we are making high quality performance parts and also that I believed that these parts were as good if not better than what was on offer in Japan. I cant see anywhere in the thread that conflicts with this and I cant see anywhere I've said any different !

The only things I have said is that as a product it wouldnt cut the Japanese domestic market there due to the fussiness and sometimes ignorant mind of the Japanese consumer. Something you could understand if you if you have done business with them.

When you have products from Trust, Nismo, Greddy, Jun etc that come ready to bolt on straight from the manufacturer you can see your product has to be of high standard to compete.

The parts I chose were, as I said, because I believed they were the best part for the build and the issues that there were, were quite easily resolved.

If I dint think they were suited they would be in the bin !!

The Hi Octane sump was supposedly first one of the new type and there was slight mounting issues as it needed some grinding to sit flush and slight leaking on the welding which again was addressed with relative ease.

The end of it all is I'm happy with how its all panned out.

The HKS boys were highly impressed with the parts and said they would happily use the parts on future builds but would prefer if parts came all ready to bolt on as one it saves time and also saves customer money if having to modify.

As for there quality of Japanese engineering ...how many Jap performance parts have you used or are on your car ??

Maybe you should go over there and go to a few tuning shops and have a look at their quality of work and engineering.These guys pride themselves on their workmanship and tuning and spend hours of work, a lot for free,to get things perfect.

And again, dont get me wrong here, my aim of using the Aussie parts was to show that our products are right up the top in performance and quality, all I've said is that to compete in a market against the likes of names like Jun, Trust/Greddy , Nismo etc, in the Japanese market place, the Aussie products have to be at the same level for use.

Mate I've belted my head against a brick wall for over 10 years plus of importing various products into Japan and its always the same problem.

And again, I'm happy with the parts that i chose for the build and how they have performed !

As an owner of a full HKS piping kit i found that although the kits look fantastic in an engine bay, The finish especially on the inside is nothing short of atrocious. For the premium yen that you pay for the full kits (156450yen for bnr32 and 139450 for 33/34 GTR) one would expect the product to be of a high standard. Instead, the finsh was not much better than the $300 Chinese knockoffs which can be bought on Ebay. Like the Chinese kits, they really need to be extrude honed to be considered finished. Maybe the kits have changed since the last few that i brought in for friends etc, but in my opinion the Trust GReddy piping kits are a far better kit.

EDIT: If those 2 pieces of pipe that you have for your blow off valve are from an off the shelf kit then it looks like HKS have lifted their game. They definitely look much cleaner inside! Sorry for the rant!

Yeah mate, my piping was pretty spot on. I was going to go with the Trust piping but got offered to good a price..

And good news is I just received a call saying the engineer has signed off on compliance...

Next step... roadworthy certificate, which I think will be a headache.

Shame you're not in Sydney!

Have a look in the Qld section, surely there's someone good that's been mentioned in there you can take it to

Might have someone

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • 2 does "sort of" applies, maybe......but looking at what parts would be needed for the swap to get engineered, registered, and insured, and basically that's everything under the car, the modifications the make it legal would be problematic and horrendously expensive, all for a street car that just cruises around and hits a few twisty roads on the weekends Also, from looking at the NSW rules and Regs, with all modifications that is required just to make the car safe and not twist itself to pieces, and then actually get registered for street use, may still be impossible nowadays As for 1, when you add in a fresh engine, fresh transmission, rear cradle and diff, tailshaft, suspension, brakes, cooling, and all the other fabrication required, your probably looking at up to $100k to do it right, all for a 20 year old MX5 that is over engineered and you would never be able to actually use the power it has on the street, much like your beastie, which I love, but you actually track that thing and can use all of its powers in anger, in a safe environment  Hell, the old Bogan Cruise Ship had more power than I could use on the street, and in hindsight, I went a bit silly on that thing, it didn't really need the 500hp it had for what I actually used the car for, it was fun, but basically unusable on the street if you value your licence  As for cams, yeah, I'll probably book it in for them to get installed and tuned soonish, like next month after MX5 Mania are back at work....... and yes, I've already sent a email to bin the turbo quote and quote instead to install cams and a new Fluidampr balancer that will suit the 2.5 better than the OEM 2.0 balancer that is swapped over for the 2.5 install, as the balancer needs to get pulled to time the cams it's a while your in there sort of thing I did think a bit about flex fuel for a laugh, but being na, and no where really around locally anymore to get E85, I've binned that idea, so no sweet sweet corn smells are set for the car I wish E85 was more of a standard fuel, it's better for the environment, better for tuning, plus that sweet sweet smell we all love As for fitting in the family, that's not needed, as everyone in the family already owns a car that can seat 5 humans comfortably enough, the MX5 is "my toy" As for buying a car that is already built, nah, I would rather pick and choose my parts, I enjoy the process, and in the big picture, the additional cost is well worth the enjoyment, and the occasional frustration, I get out of doing it, albeit with other people spinning the spanners, and me, just paying the invoice 🤣
    • Excuse me, but 2) does apply 1) Would also apply if you consider how much is spent in the alternatives. Also there's the option of 3), buy one pre-built that you can put your family in (it's me, it's my car)   That said, I went on a ~500km drive the other day. I didn't use anything more adventurous than 3rd/4th gear at about ~3000RPM and 50% throttle and I was going as fast as anyone has any sense doing on a public road, with enough grip to the point where I didn't want to go any faster. I was obviously under the limit of the current car etc etc. MX5 with 2.5 N/A to achieve the same speed would be more fun for any road scenario. Maybe consider cams. I wouldn't boost it. The use case is just not there and it won't actually make the car more enjoyable unless you really do plan on wringing gears from 1st to 3rd (at least) at 100% WOT on a public road to 150+kmh.
    • Great if: 1. You had all of the money for everything else that is required  2. Lived in a country where you could actually do this and drive it legally on the road Sadly, neither applies to me As for the turbo, I am having second thoughts, mainly for engineering/registration legality reasons and insurance  Not saying I've finished doing stupid things that I probably should do to the MX5, but boost, and V8 engine swaps isn't on the cards Strange, but true 
    • I like this page, better than that silly turbo kit   https://v8roadsters.com/product-category/engine-conversions/engine-conversion-lsx/engine-conversion-lsx-nc/  
    • That would be my Shoei helmet
×
×
  • Create New...