Jump to content
SAU Community

Gready Copy Plenum

skymugs

By skymugs,
in Engines & Forced Induction

 Share

Recommended Posts

axe s Experienced

axe s

Posted
Posted

i had a few problems with mine same as u sard 800's on gready copy... where are they leaking...

Mine first leaked out of the O' ring at the top of the injectors, replaced O' rings

Second i blew them out from the plenum (High boost on the dyno) shortened the fuel fail spacers...

third time it was the O' rings again... they were sitting to high in the fuel rail and getting washed out, made up some spacers for the top of the injectors at work.

I haven't go to test the last mod yet as i wrecked my plenum....

Hope it helps...

skymugs Collaborator

skymugs

Posted
  • Author
Posted

my o rings seem to be fine.. its where the bottom of the injector sits in the rail.. put the seals i got(rb20) werent the best fit... but only a few are leaking.. also i seen collars you can get for sr manifolds to run top feed. i was thinkn of trying them. but i cant find them anywhere

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • sunsetR33
      Ball bearing turbos

      By sunsetR33 · Posted

      I didn't think about how a circle works before, dumb.  Before, I had .9mm restrictor bolts but I can't use these cause they were shorter aluminium bolts that just tear off their threads when tightening since the OEM lines are thicker than the shitty braided one that was installed previously. Now I use longer 1mm stainless steel restrictor bolts. I think the difference will not affect the health of the turbos, but I guess I'll have to drill out the main feed bolt as I agree multiple restrictions sound dodgy. The one that was installed with the braided line was just too short, but completely without a restrictive hole.
    • wizlb
      SAU NSW - Old Pac Cruise to Newcastle All Japan Day 2025

      By wizlb · Posted

      I will be there   
    • Dose Pipe Sutututu
      Tomei gasket

      By Dose Pipe Sutututu · Posted

      Tomei or Nitto, don't use the OEM one or Cosmetic ☺️
    • SKYMAGGOT
      Tomei gasket

      By SKYMAGGOT · Posted

      After cleaning up a rusty cooling system in a 33 gtst that's been sitting for years it seems to have cleaned out the head gasket too haha. It seems the Tomei metal gasket works without machining surfaces? Or put oem? Also should put an oil restrictor while the head is off? Thanks
    • tidi0x
      R33 GTST Axles

      By tidi0x · Posted

      Thanks, I definitely saw the more expensive options from Crank and driveshaft shop. Thank you for the D-max option.  Still hopeful someone has an OEM out of the box option I found that the 300zx NA Left drive shaft is a good match for the Right on the R33. https://www.gsplatinamerica.com/product/ncv53040 Just need to find Left CV for the R33, I cannot find any <=22" axles. 
×
×
  • Create New...