Jump to content
SAU Community

Recommended Posts

For N/A it has a bit of power quiet impressive i can see this being the 240z of the future.... Does anyone know the max power you can get from a 350z? As in Extractors, High flow cat and a good exhaust and tune anyone here know anyone?

Link to comment
https://www.sau.com.au/forums/topic/246441-370z/page/2/#findComment-4288500
Share on other sites

For N/A it has a bit of power quiet impressive i can see this being the 240z of the future.... Does anyone know the max power you can get from a 350z? As in Extractors, High flow cat and a good exhaust and tune anyone here know anyone?

For a 2003-2005 model with the 206kW engine, on a good day you'll see around 180rwkW (depending on the dyno).

Mine pulled 195rwkW on CRD's dyno here in Sydney with practically the mods you've listed, but on APS' dyno in Melbourne I'd be lucky to see 180rwkW. When my car was making 185rwkW on CRD's dyno, it was pulling around 170rwkW at APS.

I've seen stock V35s pull higher numbers than stock Z33s, but at the same time it's a case of "different dynos, different operators" so it's hard to say.

The engine delivers power like a passenger car. As you can see, my torque curve is flat as a tack. It's great in the midrange, but until you do all those breathing mods it'll feel a bit choked up top. It depends on what you want with the car.

I've driven a 350Z with a 221kW engine and it's far nicer. The engine revs cleanly all the way to the limiter stock, where a 206kW engine will start to strain from around 1000-1500RPM from redline. The loss of 10Nm in the midrange can barely be felt, but how much smoother it feels in the top third of the rev range makes it a much nicer experience.

Edited by scathing
Link to comment
https://www.sau.com.au/forums/topic/246441-370z/page/2/#findComment-4288693
Share on other sites

With recent times (years 2002 onwards), would it be fair to assume that the ADM models will be just as powerful as JDM, factoring in thier higher fuel octanes ect..? I know that with the last crop of imports by Nissan Aust, eg 200sx, they have always been detuned for various reason, redering them less potent than the cars that are in the same price bracket. As most will know, the GTR all will have same power output reguardless of country being sold at, but will this apply to all Nissans globally?

Link to comment
https://www.sau.com.au/forums/topic/246441-370z/page/2/#findComment-4288845
Share on other sites

For a 2003-2005 model with the 206kW engine, on a good day you'll see around 180rwkW (depending on the dyno).

Mine pulled 195rwkW on CRD's dyno here in Sydney with practically the mods you've listed, but on APS' dyno in Melbourne I'd be lucky to see 180rwkW. When my car was making 185rwkW on CRD's dyno, it was pulling around 170rwkW at APS.

I've seen stock V35s pull higher numbers than stock Z33s, but at the same time it's a case of "different dynos, different operators" so it's hard to say.

The engine delivers power like a passenger car. As you can see, my torque curve is flat as a tack. It's great in the midrange, but until you do all those breathing mods it'll feel a bit choked up top. It depends on what you want with the car.

I've driven a 350Z with a 221kW engine and it's far nicer. The engine revs cleanly all the way to the limiter stock, where a 206kW engine will start to strain from around 1000-1500RPM from redline. The loss of 10Nm in the midrange can barely be felt, but how much smoother it feels in the top third of the rev range makes it a much nicer experience.

yea well how was your tune you said the 221 was good to drive but overall was it good to drive with around 180ish kw?

Link to comment
https://www.sau.com.au/forums/topic/246441-370z/page/2/#findComment-4288883
Share on other sites

yea well how was your tune you said the 221

The tune was checked by a few different outfits. CRD did it, APS has checked it, and I've put the car on the rollers at Unigroup and Autotech here in Sydney and they haven't seen any problems with it.

If I wanted a little more power I should put the factory airbox back on the car and fit a K&N drop-in filter. The OEM airbox is a really good design, and aftermarket intakes generally kill power. I just like the noise of it. :thumbsup:

was it good to drive with around 180ish kw?

Yeah, it's going OK. The car makes a proper sports car noise at high RPM but is still really quiet at low RPM. With all the mods I've run a G-Tech measured 13.9 ET on regular street tyres on....erm......a private road in the middle of nowhere :huh: That road wasn't entirely flat so it's not 100% indicative, but then if I did a proper launch on a properly grippy surface with heated tyres it should even out.

Edited by scathing
Link to comment
https://www.sau.com.au/forums/topic/246441-370z/page/2/#findComment-4289324
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...