Jump to content
SAU Community

Recommended Posts

Well time to get the 100k service done for me and I will be going to Gav's sometime this week.

But this post is for the mech I spoke with on the phone for approx 30 mins. Late friday I thought to ring up and make some inquireies about the 100k service. Now not only did this mech fully explain what was involved, but also suggested alternatives if I could not afford the whole thing done at once. Also we talked about many other subjects such as which lubricants to use, where to find bolts to do trans and diff changes myself, even though there is a great howto with awesome pics here, but still this guy was great, spent a lot of time explaining things to me and making sure that I fully understood and did not try to just get me off the phone because it was friday arvo and he wanted to get home.

At the time I rang, I am sure that it was past quitting time, and was not expecting to get anyone actually, so I am sure that this mech probably could have said, ring back monday and shunted me off, but he didnt, and that impressed me.

Gav's might cost a little bit extra, but I like to get things done right the first time and it looks like that is the attitude that the whole team there has.

Will post results from 100k serivce once I get it done.

  • Replies 181
  • Created
  • Last Reply

Top Posters In This Topic

yupp well this probably be my last post on this as I dont think I need to post anymore freakin awesome reveiws.

Well done the 100k service and the following got replaced:

1 x N1 Water pump - genuine nissan

1 x GTR Timing Belt - genuine nissas

2 x Timing Belt Tensioners - 1 genuine 1 not

1 x radiator cap

3 x driving belts

flush coolant

labour

All for $950, which I think is money well spent, the car is running smooth as all is well.

I definatly wont be taking my baby anywhere else!

Well Ill tell you about my experience..

EVERYONE had been raving about how good Gavins shop is, so when i was buying my skyline i took it to his shop to get inspected, everythign seemed good.. the chick that was answering the phones was unbelivable helpful .. a real nice lady and easy to speak to ..

So after the inspection which was ment to cost $55 including a compression lest, however after some talking he convinced me to go $120 and get a data stream..

so i pop down to the shop to look at the report, all seemed good, he identified a few problems.. however what i was not happy about was the fact that i was charged..

$60 for the inspection and $60 for the data stream ..

however after he accepts my money he informs me the ECU in the car is not an r32 ecu and so he could not datasream it.. Yet he still charged me for a service i didnt recieve?!

I kinda put that aside and was like .. ok ill let that slide..

that was untill i found out the ECU in my car is a stock factory R32 ECU!!

Now this has got me a little upset. Because i was charged for a service a did not recieve due to the ECU being a non-r32 ECU .. when its clearly stamped with factory r32 markings..

Whast the deal there?!

It could be a factory ECU housing with a mod chip fitted?? or some other change that the CONSULT may not have been compatable with - talk to Gavin as I am sure he will be happy to explain.

I have a 10 second R32 and Gavin is always ready to help and has solved a few problems for me in the past.

I do most of the work myself, however I will take my car to Gavin for other things.

He knows his stuff, so even though he may charge more per hour the time taken is often less (does not need to do R&D at your expense).

Regards,

Tim

Damn, my RACQ subscription was due in November but i haven't paid it yet because i lost my licence in November and haven't had a car since i've had it back. Would have just paid for itself...

Maybe i should ring up in the morning and renew it :D

  • 1 month later...

Hi All,

Just had my car serviced by Gavin Woods last week after reading all your posts. Must say I was impressed with the results. Definately recommend him to anyone needing a service in SE. Queensland.

Wags

  • 2 weeks later...
  • 2 months later...
  NismoGirl said:
Oh, here we  go.. Now everyone wants to blow his horn eh?

I've been saying for over a year that Gavin is the man for Nissan + tuning + service and people have said "no go to this place".

Meh, they are more friends to me now than a mechanic :)

Christmas card buddies.. you know the story :D

Best. Mechanic. Ever.

Still no one understands why I drive to laborador to get my car fixed/serviced. Now you all know why.  

And if it wasn't for me sitting here saying "GO TO GAVIN... GO TO GAVIN" no one would have known about him :)

You all know how much I baby my car, and for me to trust him or any of the other mechanics in his workshops says a lot :)

We also need to give recommendation to the other guys in the workshop. They seem to be forgotten when people say "Gavin Woods" yet the other guys do most of the work while gavins off in other parts of the country doing tuning :)

:D

HI ERIN

THANK YOU SO MUCH FOR YOUR SUPPORT OVER THE YEARS MATE.

YOU HAVE BROUGHT ME SO MUCH BUSINESS AND NEW CUSTOM AND FRIENDS.

YOU HAVE HELPED MY BUSINESS AND MYSELF OVER THESE PAST YEARS - WHICH

I WILL NEVER FORGET.

ONCE AGAIN - THANX NISMO CHICK.

REGARDS

kingbilly

PS- King Billy is not working at the moment - I CAN'T ****ING LOGIN !!!!!!...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...