Jump to content
SAU Community

Recommended Posts

hey guys i am in the process of buy a r33 gtst and i noticed that it had a plasticy tappy sound just above idle. Above like 2000 rmp its fine and at idle its fine its just in a short area of the rev range. I spoke to the car yards mechanic and he recond that the was another 3 r33's with the same noise. Its hard to discribe the sound as its not one i have heard before. The mechanic reckoned it was a common noise but havent seemed to find a cure for it as yet last thing they where trying was swaping crank angle sensors for some reason god knows how a crank angle sensor would course a plastic tappy sound unless it was hitting the sensor wheel which would stuff it any thoughts anyone. Dosent sound nasty its just there

cheers scottie

Link to comment
https://www.sau.com.au/forums/topic/246552-r33-gtst-timing-belt-area-nose/
Share on other sites

I know the sound, I've heard it on a couple r33's that Ive checked out for my mate. It sounds like its coming from the timing belt cover. Either the cover itself or something inside it. Both cars drove perfectly fine but it does put you off buying the car. Sort of sounds like an expensive noise to fix.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm firmly on the "zero compliance is good compliance" for FUCAs. I'd be looking to solid metal joints even if the primary reason for having them is because they facilitate the twist in the arm. I have never been more happy with the way the front suspension behaves than I have since I got rid of the FUCA bushes. Even the thin little (short lived) poly bushes in the Whiteline adjustables have too much compliance for my liking. It probably won't be long before I have sphericals nearly everywhere, probably including both top and bottom arms in the rear, and I'll start complaining about the increased costs for dental work. But I will be enjoying the driving more, I'm sure.
    • Plus, you'll get great experience in bedding in pads!
    • I have offset Nismo brackets so the fact the gktechs can pivot is less important to me. I have 170mm JIC arms with bushings - but they provide no adjustment and I'm not sure whiteline eccentric bushings will fit them (I don't want to ruin the bushings currently in them to find out). Ideally I want something with bushings + adjustment; hence why I'd like to find a pair of these. Unfortunately they aren't easy to find.
    • @Vee37 How much do you really care about finding these pads again? If your pads are quiet, work well and produce minimal dust, really isn't that enough? If you are set on finding the exact pads again, I suppose I'd do something like this -  Visit your local Jax, find out what brand of pads they carry. If the Jax workshop you previously went to had the pads on the shelf, then you can almost guarantee it will be of said brand.   I'm guessing you don't have the receipt for the previous work and pads. Can you visit a Jax workshop and see if they can look up your previous job to see what pads were fitted?  Still no luck? Put your stalker hat on, find the staff that used to work at the Jax store and ask them. Talk to local workshops, try to find out where the mechanics went to. Talk to Jax workshops, maybe they relocated to another workshop. When it comes to mechanics, its a small world. You'd be surprised how easy it is to track someone down. If these ideas don't work, shit will start getting crazy very quickly.... You could find out every brand and model of pad that fits that car... and try them individually ticking each off the list if it wasn't the one you were looking for.... If you go down this path your going to want to learn how to swap pads yourself, it is very easy, takes minimal tools and space. If you have room to park the car you have room to swap the pads. Plus you have the advantage of making sure all the brake hardware goes back in so they won't squeal! 
    • You miss spelled bearings...
×
×
  • Create New...