Jump to content
SAU Community

Recommended Posts

ok so yesterday i wanted to test it out as i jst got it.... so i gave it some up this hill.... went good but then i had to slow down to chuck a turn it as i did that my steering locked up and my engine turned off, my accessories interia so on was still on... and now jst getting maccas in the car park cruzing along... and went to turn into the drive threw and cut out again..... any ideas anyone??? plz help!

THNKZ :sick:

ok, a few questions:

1. do u have a blow off valve?

2. did you hit the brakes quite hard before the corner

3. did u put the clutch in?

If the answer to all three is yes, then its ur BOV. THis is normal for untuned cars running after market bov. So no need to worry.

IF u drop the rev to quick it will cut out.

You can either tune the car.. or just dont put the clutch in if ur droppng ur speed quickly or if u do, play with the acclerator to keep it from stalling..

=)

mmm yeh does ey brendan... so bov u recon ey..

yep, its a very common problem. My car does it as well... but ive learnt to expect so it doesnt jump on me and i lose brakes and power steering mid corner!! Which it did when i first test drove the car... I explained the problem to a friend @ xspeed who inspected the car for me and he explained it to me.. But i recently got a SAFC 2 so that will sought that problem out when i get around to installing it.

I kind of have the same problem excet my oil presure meter on the right Drops down really Low then my engine cuts out,Happend during idle once in 2nd up a hill and again in 2nd coming out fo a corner :sick: and theres plenty of oil..

Ive got this to.. ive noticed if i put my foot down before a corner and put on brakes straight after and go in for a turn it will cut out.. so i just make sure i dont do that or if i do i play with the accelerator like someone else noted..

how much it cost ya?

safc 2 cost me 100 bucks. Bought it off a friend

installation: free, do it my self

and tuning? maybe 150 bucks im guessing? Hours worth max on the dyno.

meantime just be aware of it and u will be fine.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I have had the r3c in for years now, maybe close to 7 years and it has never missed a beat, anyone can drive it. Super easy to drive around town, the hotter it gets does get a little hard but it holds the power easy as 
    • Shit thing to find eh? I guess the big issue is that whatever "fix" you do now, it might slow the rust down but won't fix it. I just wanted to add that in no way is fixing sheet metal in 3 dimensions the place to start with welding....that is a pro only job because its too hard to work out where things should be, let alone doing a clean enough job that it can look OK and still be strong too.  I needed to get a new rear quarter panel on the GTR and it took a pro weeks to get the old one off cleanly, new one on in the right place and looking somewhat like it should have with most of the previous connecting panels in place. Gluing a couple of bits of metal together with a welder in the garage is doable, but that is totally different to doing panel  replacement
    • This seems to be a very popular swap since all the turbo skyline prices went through the roof! I'll let someone more familiar chime in, but I understand that yes you probably want to swap the loom in to swap out the auto TCM stuff. You should not assume everything just plugs in either, you need to check at least the ECU wiring diagram for any differences at the plug at the left headlight and probably the ones near the ECU that join the dash loom too  
    • hows it fellas, my first post here which seems crazy cos half the forums i read are like the same age as me haha. to make a long story short ive got an r34 sedan (rb25de neo auto) which im swapping to a s0/s1? rb25det, r33 big box and nismo gt pro lsd. i have the motor and gearbox all bolted up outside the car, old motor and trans out. i bought the motor with stock ecu and loom, do i switch over to that? or will it be easier to get a r34 manual ecu and keep the loom if thats even possible.  also engine mounts look different, anything else thats different or incompatible? cheers, hope this all makes sense Paddy
    • att.4QNbuJlz_gNZPFBGFqeEvxSUHXkGt7z40V59MrtXTPg.mp4    
×
×
  • Create New...