Help! Axel Removal

[r33rckt]

I have done somthing stupid and removed and sold all the controll arms from a parts car i have oh and gear box too

now i am having a bit of trouble removing the nut off the end of the axell to remove the hubs abd rotors.

any ideas ppl??

i have tried a massive lever to hold the disks from turning and a big breaker bar to remove the nuts but it just wont sit still enough for the nuts to crack.

[Lazy-Bastard]

handbrake?

[stomper]

I have done somthing stupid and removed and sold all the controll arms from a parts car i have oh and gear box too

now i am having a bit of trouble removing the nut off the end of the axell to remove the hubs abd rotors.

any ideas ppl??

i have tried a massive lever to hold the disks from turning and a big breaker bar to remove the nuts but it just wont sit still enough for the nuts to crack.

Air driven impact wrench. Works every time!

I had to get the nut off that holds the harmonic balancer to the crank, once the crank was out of the block.

No rotation, no effort too easy!

[BHDave]

if nothing is holding it then rattle gun as stated above.

Alternately, remove the driveshaft and hub as a unit and put it all in the bench vice.

[r33rckt]

thanks for replies ppl i will just borrow a rattle gun

[phatlavish]

Pulling the handbrake should be strong enough to hold the hub while ya jump up and down on a breaker bar

[Duncan]

you need a 64x geared torque converter like this.

absolutely f**king amazing. best tool i own.

it undoes any bolt (as long as you can brace it on something)