Jump to content
SAU Community

Recommended Posts

Imagine a 5 speed tiptronic in a c34. That to me would make the series 2 complete. Anyone thought about/looked into the possibility?

M35 / 350 z spares must be coming online?

Maybe Im :huh: but seems like it is a really worthwhile mod. Wadda u think?

Link to comment
https://www.sau.com.au/forums/topic/246774-5-speed-tiptronic-in-c34-stag/
Share on other sites

G`day this has all ready been talked about on 30 march trans upgrade. Why few think it`s the go many don`t seem to care or are not interested.I have been talking to few shop`s about this & it wll work but at WHAT COST ???,cheer`s chuckie

Have you seen the physical size of the 5 speed? Apart from the fact that it is made to bolt up to a V6, the bloody thing is MASSIVE compared to the C34 box. Not having closely examined the possibilty myself, I cant say for certain, but I can imagine that the trans tunnel would need a fair bit of modifications, shifter position and connection would need to be looked at, you would need to look closely at the departure angles for the front and rear driveshafts, position (and size) of the transfer case, attessa ecu compatibility, the list goes on and on.

this is why there isn't much interest in it.

Have you seen the physical size of the 5 speed? Apart from the fact that it is made to bolt up to a V6, the bloody thing is MASSIVE compared to the C34 box. Not having closely examined the possibilty myself, I cant say for certain, but I can imagine that the trans tunnel would need a fair bit of modifications, shifter position and connection would need to be looked at, you would need to look closely at the departure angles for the front and rear driveshafts, position (and size) of the transfer case, attessa ecu compatibility, the list goes on and on.

this is why there isn't much interest in it.

Thanks for that. Explains a lot

gtr manual conversion = 6 speed :)

and it would be cheaper,, not shure if a gtr box would bolt on to the rb25... anyone?

No if i wanted manual i would own one but i want auto that`s why i have auto :D play with clutch every day :down::sick: 5 speed tip would be sweet ,if you want manual con speak to BRAD :merli::):3some: ,thank`s jippa,we can all come over do on week :woot: end :yes: i cookthe BBQ :ninja: if you like ,cheer`s dude .

would be keen as but i have warranty on the car that covers the auto box.. maybe when that runs out in 4 years and i still have the stag.. would love a 6 speed though . mmmmmmm 6 speed :)

dont get me wrong,i still like the auto for cruiseability

As someone that's owned both (owned a s2 stagea with 4sp tiptronic for 2 years and now own a M35 with 5sp), I think it would be wise to actually drive a M35 before assuming that the 5sp auto would be automatically better than the 4sp.

Before I bought my M35 I thought the 5speed auto would be one of the killer features. But as it turns out its actually starting to frustrate me a little. I'm pretty sure my gearbox is badly in need of a service, so dont take my experience too seriously, however I would be interested in what other M35 owners have to say.

Firstly, my previous stagea did have a shift kit (MV automatics in SA) installed so that does shift the balance in its favour already. That 4speed with the shift kit was the best auto I have ever driven. Gear shifts were near-instant and quite snappy. Just a small movement of my right foot and it would kick down very quickly - which was great for changing lanes to get out from behind slow drivers (not that I do this often).

However, my M35 is almost the opposite. Its ok once it actually starts moving, but if I jam my foot to the floor from when the car is stopped, it takes at least 2 seconds to even start moving - its as if it actually jumps into neutral when not moving and then has to find 1st gear again. Then 1st gear is actually very short so it runs out of puff very quickly, before hitting 2nd and I find 2nd is where it really starts to move. The later gears seem ok. The gear changes are completely different to the 4speed - I wonder if this is due to the car being drive-by-wire?? allowing it to blip the throttle much more effectively during gear changes?

Overall the M35 drives very nice but occasionally I find myself wishing for my old 4speed auto back. Due to the slower gear changes, the extra gear means even more time spent changing gears. This is something I hadn't thought of before. The kickdown is also very slow. If I plant my foot in order to overtake, its a good 2+ seconds before it actually changes gear, and even then it seems to be so loaded up at this point (since it hits full boost at the same time) that it really doesn't go all that quick, certainly not as quick as its capable of.

When cruising at constant speed, it feels like the gearbox disconnects or something - maybe someone could help me understand this? As soon as I touch the throttle again, ie. to just ease the speed up a little if it starts slowing down, its like the gearbox has to re-engage which you can feel through the whole car. I dont know if any of this relates to the drive-by-wire or just the transmission...but its little things like these that make me a bit disappointed with the 5speed auto.

Dont get me wrong, the car is still nice to drive - and the above is just little things I've picked up - when compared to my old 4speed auto stagea.

So yeah whilst it is a nice concept to have 1 more gear in your stagea, I think in practice it may be otherwise since the two gearboxes are VERY different (at least to drive).

I welcome any further feedback on this from other M35 owners. Hopefully my experience is due to a fault somewhere along the line since I would like to improve the M35 gearbox behaviour if possible.

i find the gearbox sluggish too, mostly on kick-backs at low speed. ie, cruising in traffic at aroun 15km/h ill put my foot to the floor as i pull into the lane next to me, but it takes SO f**kING LONG to kick-down that the car i almost cut off has had to brake so they dont hit me. then it find the gear it was after and powers off. in traffic now i use the tiptronic and keep it in 1st so i can perform said manouvers safely.

maybe due to the higher power and torque over the RB25 that it needs to be more gentle with shifting so nothing down the driveline is broken or prematurely wears out?? thats my theory anyway lol

while the car is moving, i rekon the gearbox is perfect - on my car anyway - except for a problem i put it in for last week.

i love my manual c34, i much rather it than an auto...

well i like my AUTO THAT`S WHY I BROUGHT ONE :) ,if i had wanted manual i would have found one ,great work Alex.if you don`t have any thing good to add to this then PLEASE POST in right thread thank you .cheer`s chuckie.

well i like my AUTO THAT`S WHY I BROUGHT ONE :) ,if i had wanted manual i would have found one ,great work Alex.if you don`t have any thing good to add to this then PLEASE POST in right thread thank you .cheer`s chuckie.

fk off idiot i was just posting my opinion, go stitch up a dash mat or something

While it`s nice to see you post some good comment would be helpful :thumbsup: ,speaking to few lad`s tiptronic may not like rb30set up :D ,but will keep ASKING question`s see what can be done .cheer`s chuckie.

As someone that's owned both (owned a s2 stagea with 4sp tiptronic for 2 years and now own a M35 with 5sp), I think it would be wise to actually drive a M35 before assuming that the 5sp auto would be automatically better than the 4sp.

Before I bought my M35 I thought the 5speed auto would be one of the killer features. But as it turns out its actually starting to frustrate me a little. I'm pretty sure my gearbox is badly in need of a service, so dont take my experience too seriously, however I would be interested in what other M35 owners have to say.

Firstly, my previous stagea did have a shift kit (MV automatics in SA) installed so that does shift the balance in its favour already. That 4speed with the shift kit was the best auto I have ever driven. Gear shifts were near-instant and quite snappy. Just a small movement of my right foot and it would kick down very quickly - which was great for changing lanes to get out from behind slow drivers (not that I do this often).

However, my M35 is almost the opposite. Its ok once it actually starts moving, but if I jam my foot to the floor from when the car is stopped, it takes at least 2 seconds to even start moving - its as if it actually jumps into neutral when not moving and then has to find 1st gear again. Then 1st gear is actually very short so it runs out of puff very quickly, before hitting 2nd and I find 2nd is where it really starts to move. The later gears seem ok. The gear changes are completely different to the 4speed - I wonder if this is due to the car being drive-by-wire?? allowing it to blip the throttle much more effectively during gear changes?

Overall the M35 drives very nice but occasionally I find myself wishing for my old 4speed auto back. Due to the slower gear changes, the extra gear means even more time spent changing gears. This is something I hadn't thought of before. The kickdown is also very slow. If I plant my foot in order to overtake, its a good 2+ seconds before it actually changes gear, and even then it seems to be so loaded up at this point (since it hits full boost at the same time) that it really doesn't go all that quick, certainly not as quick as its capable of.

When cruising at constant speed, it feels like the gearbox disconnects or something - maybe someone could help me understand this? As soon as I touch the throttle again, ie. to just ease the speed up a little if it starts slowing down, its like the gearbox has to re-engage which you can feel through the whole car. I dont know if any of this relates to the drive-by-wire or just the transmission...but its little things like these that make me a bit disappointed with the 5speed auto.

Dont get me wrong, the car is still nice to drive - and the above is just little things I've picked up - when compared to my old 4speed auto stagea.

So yeah whilst it is a nice concept to have 1 more gear in your stagea, I think in practice it may be otherwise since the two gearboxes are VERY different (at least to drive).

I welcome any further feedback on this from other M35 owners. Hopefully my experience is due to a fault somewhere along the line since I would like to improve the M35 gearbox behaviour if possible.

Yep.

If you mash the accelerator the computer will take a second (or 2) to Think. Select. Engage. It is due to the drive-by-wire.

The key is to squeeze the accelerator... and plan sightly in advance where you want to go and who you want to pass.

Try taking ~2 seconds from "no foot" to "foot to the floor". I think you will find it is more responsive that way (odd, I know).

If I use that technique, I get some pretty good gear changes.

Yes it seems that 1st gear was only there to build torque for 2nd gear, but I would disagree that it is "breathless".

Have you opened up your airbox? Got a decent filter? Installed a 3" exhaust?

MV Automatics do not do a shift kit for the M35 :P .... not yet anyway.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I just got to work and skimmed through 61508 and 61511. I was surprised the CSA adopted both, but neither are enforced. To recap what I read, it states that in a perfect world, they should be segregated but they acknowledge that this is not industry standard and clearly mention that they allow mixing of safety and non-safety. 61511 also mentions software segregation like AB does in their safety PLC's.   Now if only I could go back to control, let alone safety over comms. In my current line of work, we're only allowed monitoring and basic control over comms. Everything critical must still be hard wired as much as possible. 
    • I've unfortunately never been as they're on the complete other side of the continent and another country that isn't currently letting us in as easily as they use to. I even heard their stop signs over there actually say "Stop" instead of "Arret". If I decided to trek the 48h drive, I wouldn't know when or where to stop haha. Whenever I order parts from UP Garage, I order from Japan as it's cheaper. Same with GKTech... oddly enough, it's cheaper shipped from Australia then it is the US.  UP Garage Japan operates their US leg though, unlike Tomei. If Tomei JPN had the power to close down Tomei USA, I'm sure it would be done in a day. They're two completely separate entities. Tomei JPN messed up somewhere originally agreeing to its creation and got sacked big time. 
    • I asked someone about this and he told me about the Audi 1.8T engine. But I think it would be difficult to swap
    • I don't know that machine specifically, but I'd personally go for something with a little more kick than 130amp. Around up to 180 would be good. At the 6mm range, you're really pushing the machine hard and don't have a long period you can run for with out needing to give it a rest. Lots of MIG machines come with a regulator and hose. A lot will come with a starter roll of wire too, but it isn't too expensive to buy. I'd recommend NOT buying a massive roll too, as you don't want it sitting around FOREVER in the machine between uses and potentially going to shit. For thin sheet metal, get a roll of 0.6mm if you're doing over 3mm and above, switch over to 0.8mm wire. Even by 2mm you'd probably really want to switch. As for gas battle, it's all swap and go style now. You'll pay a bottle deposit, and then X amount to swap for a full one. I think it's like $200 or $300 for a D Size bottle upfront as "deposit", and like $110 to $150 per swap. My D size CO2/argon bottle lasts a fair bit of welding on the MIG. And I run an E size bottle on the TIG. For DIY MIG, stick with a D size bottle. If you really start to get into a LOT of welding and doing it really regularly, then upgrade. If you're like most DIY car guys, one D bottle will last you 2 or 3 years easily. I think I've been on my current bottle about 5 years. It is starting to get low, but I've been smashing it a lot more the last 6 months.
    • SR20s came with cars like the Bluebird and Primera, but the RB20 never came. The ones in Turkey were either brought in specially or from abroad. That's why RBs aren't as common as SRs. And if a part breaks or I need to replace it when doing maintenance, it's harder to find parts for RBs.
×
×
  • Create New...