Nzmo32 R32 Gtr Build Up.

[Evocoop]

Thanks for the intrest in the Accusump. It's on it's way to a new owner.

[unique1]

Hey Coop i recieved the accusump today mate thanks alot for that, it took me ages to unwrap it from the amount of silver tape u wrapped it in lol Now i just have to find a suitable location to mount the tank, im thinking under the plenum on chassis rail (where the hicas pump usually is) or at the front somewhere, just worried if i have a front end bingle i dont want to damage it.

How much was the PWR radiator worth too? PM if u like, i just picked up one second hand for cheap and wondering what it would of cost new roughly.

thanks again

[SDEWY5]

Looks good!

More info on the dry sump kit please?

Definatly keep the bent rod, it would make a nice, but expensive paperweight - ive got 6 CP pistons doing the same thing

lol, i got 6 CP's, 6 ACL's and 6 stock pistons if any1 is in need of paperweights heh..awesome build on this car, should be one menacing track car when its done, congrats on the great work so far

[Evocoop]

Hey Coop i recieved the accusump today mate thanks alot for that, it took me ages to unwrap it from the amount of silver tape u wrapped it in lol Now i just have to find a suitable location to mount the tank, im thinking under the plenum on chassis rail (where the hicas pump usually is) or at the front somewhere, just worried if i have a front end bingle i dont want to damage it.

How much was the PWR radiator worth too? PM if u like, i just picked up one second hand for cheap and wondering what it would of cost new roughly.

thanks again

Cool Cool, Sorry about the mad wrapping. I just wanted to make sure nothin fell out or got lost. And I get the tape for free.

Under the plenum is where i was planning on putting it to.

The Radiator was a custom built one that I had made off some plans from a friend's R32 to fit where the AC condensor used to fit and incorperates a water to oil engine oil cooler in the end tank. It was about 1450 plus the fan. Very happy with it though. PWR do an outstanding job.

SDEWY5 Posted Yesterday, 06:55 PM

awesome build on this car, should be one menacing track car when its done, congrats on the great work so far

Thanks mate. If SDEWY5 is your number plates, That's cool. Good thinking.

[Evocoop]

Did a bit of work on sunday. I modified.........Ok hacked up the door trims to allow the doors to be closed without fouling on the doort trim. I just discarded the bottom half and replaced it with some ali plate.

[SDEWY5]

Sadly no i dont have them, was adament that i would get them but never could justify the money for plates when i could buy so much other crap...lol...one day, if theyre not there i have a few others i could use.

[Evocoop]

Hey if anyone can identify these boxes in a R32 GTR can you please enlighten me as to what they are and what they control. They are under the parcel shelf an in inside the drivers side quater panel. I assume the one on the left is the Atessa box but i wanna chuck the stuff that's no longer required like the Hicas. also Just want to make sure that if I remove the Hicas controller that it will not effect anything else.

Thanks

And in other news. I had my first go at doing some sheet metal work to cover the holes in the dash that i had to cut to fit it back in around the bars. I tryed to bash out a piece of plate to weld to the car that was the same profile as the shape of the dash. It looks better now that I've primed it though. Also remounted all the glove box and dash brackets that had to be removed to fit the cage. The interior is now pretty much ready to get some paint. just need to weld the plates for the 5th and 6th point of the harnesses to the floor. I bought 2 Sabelt 6 pnt harnesses that arrived xmas eve that i need to go buy some nuts for to weld to the floor plates for the eye bolts.

[sav man]

from left to right, ATTESSA, HICAS ECU (Removed Mine). And the one behind the driver is a fuel pump regulator (makes the pump only pump when it's needed, not all the time), i think most people bypass these so the pump goes all the time, cause they have a habbit of dieing.

[Evocoop]

from left to right, ATTESSA, HICAS ECU (Removed Mine). And the one behind the driver is a fuel pump regulator (makes the pump only pump when it's needed, not all the time), i think most people bypass these so the pump goes all the time, cause they have a habbit of dieing.

Too easy mate thanks. That's what i was thinking but wanted a comfirmation.

[Weapon]

Madness coops, when does thing get painted?

Looking the goods so far

[Evocoop]

Madness coops, when does thing get painted?

Looking the goods so far

Ta Marty. Hopefully have the interior and engine bay painted by monday. The body will get done whenever. Will post pics if i manage to get it done.

Welded in the new seat belt mounts for the 5th and 6th points of the harness today. Chucked a seat in and mocked up the harness to check the mounting positions. Here's a pic of the new harnesses.

If any body wants the BRIDE seat and adjustable rail, it belongs to a mate and he's chacin 5 hungy for it.

[Weapon]

Oh very nice, are you still going the R33 GTR midnight purple was it???

[shanef]

Oh very nice, are you still going the R33 GTR midnight purple was it???

by the looks of that last pic it already is a shade of purple

[Evocoop]

Yeah will be the 33 purple. I've already done the door and boot jams as the last pic shows.

[Evocoop]

Got the interior and cage painted on the weekend. I wanted to do the engine bay to but the compressor blew up.

It's not the greatest job Meh. Race pig, it'll do. Better than primer.

[Beer Baron]

looks good enough to me. the cage looks very good too. very neat and I like the new rear firewall.

[Moodles2]

I'm curious about the adjustable cam gears you have in, look so worn out out I can't tell what brand.. kinda Tomei like

[Evocoop]

looks good enough to me. the cage looks very good too. very neat and I like the new rear firewall.

Thanks Mate. I was pretty happy with the cage when we finished it. In hinsight would have really liked to have replaced that factory bar that runs under the dash and through near the steering column with a CDS one and make it part of the cage. Would have been able to get the front down bars closer to the pillers if we had have thought about it earlier.

I defo like it better now it has colour on it. Kinda blends in a bit better.

Moodles2 Posted Yesterday, 10:15 PM

I'm curious about the adjustable cam gears you have in, look so worn out out I can't tell what brand.. kinda Tomei like

They are old JUN ones I'm pretty sure. They don't look the flashest but they are accurate and I run the timing cover anyway so they'll go again.

[wahick]

Mate this looks insane...gotta love a kenny cage!!

Reckon it'll be all go by the first hillclimb (end of march if my memory serves me correctly)??

and don't forget a seat for me

Swade

[Evocoop]

Mate this looks insane...gotta love a kenny cage!!

Reckon it'll be all go by the first hillclimb (end of march if my memory serves me correctly)??

and don't forget a seat for me

Swade

Ha ha Kenny build a cage? yes he Ken.....

Don't know about the first hill climb mister. Will be a very close thing if at all. Still so much work to do. And money. Hopefull ready for the rally sprint but.

Got the engine bay painted on the weekend. Also under the guards, I finished the seem welding and got te stone guard on.