Jump to content
SAU Community

Recommended Posts

just want to know what people are using for suspension when they go through for an inspection?

20 year old std suspension is well gone, and im not paying $200 for a set that might pass or leak, so whats the deal these days? Would they allow a set of Bilsteins pass at legal height? They arnt adjustable like the normal "screw up and down" type like you normally see, just a circlip adjustment.

just want to know what people are using for suspension when they go through for an inspection?

20 year old std suspension is well gone, and im not paying $200 for a set that might pass or leak, so whats the deal these days? Would they allow a set of Bilsteins pass at legal height? They arnt adjustable like the normal "screw up and down" type like you normally see, just a circlip adjustment.

friend of mine has passed regency with that style strut many times.

I am assuming you are after a set to suit a 32??

yerp

friend of mine has passed regency with that style strut many times.

I would assume they would let these through, as the only adjustment is via a circlip, which if there is only one groove means no other adjustments.

If they are adjustable below legal height they shouldn't pass, however they might pass them if it isn't obvious that they are adjustable.

Or if the height is reasonable they might not even look.

Edited by Rolls
  • 2 weeks later...

Depends where the boost gauge is, if its in a vent or down below the dash it is fine, on the dash or a pillar you can't have it though.

Turbo timer is illegal because if you have a crash and the car get a fuel leak and it keeps running, sup massive fire. They shouldn't have given you roadworthy with it connected.

See i've never got that rule/law, as in heavy trucks they ALL come with turbo timer's standard and keep running even if you turn the maxi's off...

See i've never got that rule/law, as in heavy trucks they ALL come with turbo timer's standard and keep running even if you turn the maxi's off...

Someone explained it here years ago i think, but trucks are a different kettle of fish, being much larger motors running huge turbos that are running max pressure towing loads all the time. They need the time to help cool the turbos down, unlike cars chugging along at a regular 60km/h pulling 2.5krpms per gear change.

See i've never got that rule/law, as in heavy trucks they ALL come with turbo timer's standard and keep running even if you turn the maxi's off...

Diesel engines have mechanical fuel pumps, if the engine stalls the engine stops pumping fuel, if there is a fuel leak then the engine will almost certainly stall due to the MASSIVE pressure the lines are under, but being metal lines they almost certainly wouldn't leak.

So basically you have an accident in a truck as soon as there is a fuel leak that could cause a fire the engine basically stalls anyway, hence stopping the fuel pumping into the fire. In a petrol engine if they crash and stall the electric pump will keep pumping regardless.

Also diesel isn't as flammable as petrol.

Edited by Rolls

So i'm looking at buying 'Longz' R34 GTR from NSW, from my understanding it'll need to get an identity check which does involve some pit checks.

It has the following:

"* Apexi Power FC with Commander ($1600)

* HKS Boost Controller ( $800 )

* Z-Tune Carbon Fibre Bonnet with Carbon Fibre Aero flush pins fitted. ( $850+300 )

*Apexi Pen Turbo Timer ( $100 )

* Tomei Cam Pulleys ( $520 )

* Ganador Titanium Exhaust

* Nitto Clear Cam Cover ( $120 )

* BC Coilovers fitted 2500km ago $1300 have reciept"

What would i need to change back to stock? I'm guessing a lot of it......

This vehicle identity check, can i get this done anywhere else besides regency/lonsdale?

Edited by occxlr8ed

Any police station will do it, but if they suspect it is modded it will be sent to regency, If so the following will need to be returned to standard:

Turbo timer - removed

cam pulleys if visible removed

exhaust if above legal limit removed

coilovers almost certainly will need to be removed for both pits and regency as they will be adjustable and too low

bonnet 100% needs to be removed as it doesn't pass ADRs

Boost controller removed

Power FC removed and stock ecu installed

depends on the rim size but if they exceed the ADRs also returned to stock

my advice is wind the coilovers as high as possible, buy a set of stock rims and remove all fancy things, also put a non clear timing cover on, that should make it look stock, oh and obviously take the stupid CF bonnet off haha that will be instant ass f**king

Edited by Rolls

freaking attention that skylines get!!!

the past 2 years of driving my 350z, lowered to about 4cm of ground clearence, etc. etc. i've had ZERO problem, not one cop pull me over....

if you get a defect sticker is it the same deal? i've had my mates get theirs cleared at a cop station instead of regency however that was just for tint and the other case headlights.

Edited by occxlr8ed

freaking attention that skylines get!!!

the past 2 years of driving my 350z, lowered to about 4cm of ground clearence, etc. etc. i've had ZERO problem, not one cop pull me over....

if you get a defect sticker is it the same deal? i've had my mates get theirs cleared at a cop station instead of regency however that was just for tint and the other case headlights.

Ive never been defected driving on the roads, but I have almost been defected quite a few times, mainly due to doing stupid stuff and just getting out of it.

Minor defect is police station eg what you just mentioned, major defect (suspension, too loud, turbo etc) is regency.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes. It's either "2 wires", or 1 wire, depending on how you look at it. It is the connection that ties the battery -ve to both the chassis and the engine. Every electron that goes in or out of the battery goes through those 2 small spots (on the inner guard and on the engine block). If those are not clean and tight, then shit starts to suffer. Yeah, but measure it again cold in the morning, after it has had hours to rest. You can't usefully test the charge state of a battery immediately after it has been running because the alternator puts a surface charge onto the plates that takes a while to soak in and balance out. It will always read higher, and potentially look properly healthy, when fresh off of charge. But hours later it can look a lot less healthy. It's also worth measuring the battery voltage while cranking, although this can be difficult with a typical DMM because the screem update rate is so slow on most of them. An analogue voltmeter is actually a better tool for that. If the voltage drops too far while cranking, it is a sign of a poor battery. Although I don't think we're necessarily looking for a weak battery here - just wanting to exclude it.
    • https://www.facebook.com/share/15ZMn5oXtc/ Updated Event (so its not private and can be shared easier)  Attempting to coordinate a big push of Stagea's to this years GTR Festival. Great event last year and hoping for the same this year.  Discounted tickets 20% off for their various tickets until the 3rd of Feb Monday. Drags, show and shine etc.  I've emailed them to ask to set a location aside for the Stageas for the show and shine - they are happy to do so if we can get them numbers, I'm happy to keep track of that. Entering as Nismo category.  I'll be road tripping up from Melbourne, would be cool to convey if people are interested, maybe there is SAU convoys from each capital? If you have ideas about that let me know.  https://gtrfestival.com.au  
    • Does have series 2 airbag steering wheel and passenger side airbag also.
    • Do I have a series 2 or has someone spent money to have a series 1/1.5 look like a series 2? Everything I have read says the series 2 came out in 1996. I have a car manufactured in December 1995. The exterior, engine and interior are all series 2 other than the dash facia is series 1. Paint code is also kr4 that I believe is only available on a series 2. I have a VX Vehicle History Report and it says Grade: GTS25T TYPE M2 Manufacture date: 1995-12 Make: NISSAN Model: SKYLINE Body: E-ECR33 Grade: GTS25T TYPE M2 Engine: RB25DET Drive: 2WD Transmission: F5
    • I went to Repco to get them to test the battery using their tester (not a volt meter), alternator shows 14.3v when running, and when the car was off after the it was on full load I think it was 12.6v but the guy said it was all good. Terminals are all clean, no corrosion. Though I coulda sworn when I tightened up my alternator belt the car idles a bit higher and the steering wheel shakes a bit until it's warmed up. I wanted to confirm for the earth cable/s, are you referring to the 2 wires that are bolted onto the frame rail under the battery? I might be overthinking this a bit.
×
×
  • Create New...