Jump to content
SAU Community

Recommended Posts

it's either a 3037 or a 2835. And the sticker on the box says 3037 so i beleive it.

I'd trust the description and get it at that price to be honest. With the current exchange rate i reckon you could add another grand to the price.

3037 is good for 300rwkw or a touch over.

Thats a 3037 pro s kit ,same as i had.

GT-RS kit dosent come with dump or intake pipe etc etc, they only come with oil lines and compressor elbow, that could be a 2835 turbo as i cant see the exhaust wheel to be sure, but if you order the 3037 kit they will send you a 3037 turbo ofcourse, by the way i would snapp that up asap, they are good people to deal with to even if they are a little hard to understand sometimes.

hmmm is that where you bought yours from nizmo freek??

wow in us its a fair bit..how much did u originally pay for yours...what do you think of this turbo laggy much? do you have cam gears done??

how close to max are your 555cc injectors?? at 270rwkw

its a 3037 pro s

its good for around 300rwkw with a lil lag (read acceptable amount)

a gtrs will not get you 270 unless you have cams and absolutely ring its neck... 240-260 tops is about right

555cc injectors are good for a bit over 300rwkw on pulp

a 2835 pro s will get you 270rwkw and less lag

i run a 2835 and have 265rwkw on 20psi with exhaust cam gear to aid response, without the cam gear most people see 270-280rwkw

its a great turbo for the rb25 and i would highly reccomend it

its a 3037 pro s

its good for around 300rwkw with a lil lag (read acceptable amount)

a gtrs will not get you 270 unless you have cams and absolutely ring its neck... 240-260 tops is about right

555cc injectors are good for a bit over 300rwkw on pulp

a 2835 pro s will get you 270rwkw and less lag

i run a 2835 and have 265rwkw on 20psi with exhaust cam gear to aid response, without the cam gear most people see 270-280rwkw

its a great turbo for the rb25 and i would highly reccomend it

listen to what joey is talking about .....

so with cam gear and hp fuel pump z32 afm and injectors and exhaust....it will be laggy on my r34gtt? the gtrs kit that is??

and you suggest the 2835 pro s?

less lag in that turbo?

but as u said wont get much higher then 270rwkw and thats with cam gears ?

lag factor is essentially the same on both turbo's... a gtrs may his full boost a couple of hundred rpm quicker but the 2835 is a slightly bigger unit so when you his full boost on the gtrs and the 2835 is on 95% they are about even anyway and then the 2835 has a lil more puff left.

the lag factor is VERY minimal on mine.

basically my low boost (1 bar @ actuator) is what you'll get squeezing the crap out of a gtrs, so the 2835 is a little kinder to your car, albeit not as kind to your wallet.

gtrs = 250rwkw-ish

2835 = 270rwkw-ish

better of getting a gt3076r iw and you would save a couple of thousand at least.

exactly what i was going to say, i just got mine today and going to be installing it in the next couple of weeks once i get all the oil/water lines and piping sorted :rofl:.. btw paid $2k for the 3076R EW, exhaust manifold and dump flange.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for that.... If only I could do something once and be happy with that, like some people do....
    • I had no transmission at all so I managed to find a big box manual gearbox from an R34 GTT for an insanely good price in EU. I converted it to push type which cost more than the transmission almost, with parts from Amayama! These engines are very strong and can put out decent power with a properly sized turbo. You can save on money from parts like pistons and rods, and invest those in the transmission and other parts. I suggest you join the RB20 Enthusiasts facebook group, plenty of info and almost daily posts there about 20DE/DET/Neo+T builds. (I hope I'm not breaking any forum rules by mentioning third party platforms, just trying to help the buddy out)
    • Yeah, having tried all of those methods including BBQ+recipro/hacksaw, I ended up buying a bush press kit under $150 that works well, like this: https://www.ebay.com.au/itm/355967727167?mkcid=16&mkevt=1&mkrid=705-154756-20017-0&ssspo=sfmmuhxgqhm&sssrc=2047675&ssuid=dJvnaZ11TB-&widget_ver=artemis&media=COPY It basically has a range of pushers and cups with threaded rods between to press out a range of large bushes. The problem with any sawing solution is minimising damage to the subframe side, although it probably needs a quick sand afterwards no matter what solution you try due to damage
    • Hi. Thanks for the answer. I do not have instagram 😄 I too considering turbo the RB20DE NEO 🙂 But i think i upgrade the gearbox first or at least buy new.  
    • Just pulled the passenger apart so got a good idea, also the side bracket that pivots the top half is completely cooked.. how I don’t know.. haha and paid $400 also included a photo of the passenger seat! She is mint
×
×
  • Create New...