Jump to content
SAU Community

Recommended Posts

Have you run yours down yet mate?? I would expect the light r32 to make a great lightly modified time or even stock.

Hey man!

Nah I have not run a 1/4 mile yet. Its pretty much stock with twin pods, aftermarket / larger down and front pipes and a high flow cat with stock cat back exhaust.

Stock boost of +0.7 Bar = 10.9 Psi with rebuilt steel internal turbos.

Like was saying before, I have seen time results vary. For the R32 GTR, magazines have claimed 0-100 Km/h = 5.3 secs to 4.8 secs and 1/4 mile = 13.7 secs to 12.8 secs.

The info I have read seem to claim the R32 GTR is the quickest out of the 3 GTR's due to its lightness in weight.

But the R33 and R34's have more torque and I believe a slight kW increase.

Yeah did 12.5 wid power fc, exhaust and air filter..and with a burnt stock clutch.. but after i installed the nismo twin-plate i went to 12.6 lol but im only getting 1.8 - 1.9 60ft...i remembered once with my stock clutch i did a 1.6 60ft but could be due to the freshly prepped track at the time helping the 60ft time.. :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey, it's me! Though honestly, if I had 20M in my bank account tomorrow, I would not want to be rid of my car all of the sudden - Which makes me think this is money stuff, not "I actually hate car" stuff. I'd probably double down and buy even more trinkets and fun things for it. If this is not you, then sell it cheaper. It will sell at a certain price after all.
    • This is the LCA mount reloctaion kit. Self explanatory in its description. https://au.gktech.com/products/s13-180sx-r32-subframe-anti-squat-reduction-weld-in-kit?_pos=62&_fid=1e812d392&_ss=c These are the alloy subframe bush inserts that I am using. I like them. https://au.gktech.com/products/rear-subframe-slip-in-collars?_pos=29&_fid=1e812d392&_ss=c Alternatively, if you have original and shitty bushes, you might consider outright replacement with poly. https://au.gktech.com/products/polyurethane-rear-subframe-bushes?_pos=28&_fid=1e812d392&_ss=c I would also higly recommend that you look into adjustable RUCAs and tension rods, so you can sort out the camber and bump steer behaviour, especially if the car will be any more than ~15mm lower than stock. I would also highly recommend the GKTech FUCAs, although you really should do some research and learning on the subjetc of R32 FUCAs before making any decisions. All of this will be criticaly difficult to get through a TÜV inspection too, if that happens to be relevant to you. Note that if you do install the relocation kit, you will absolutely have to replace the associated bushes with spherical joints (you can read all about that on the product page) or upgrade the LCAs also.
    • I picked up my block and head last week and have been slowly assembling it since then. Pictures I took earlier this week. The rest of the auxiliaries are on now. I just have my intake manifold runners to tap for my WMI direct port setup before putting it back on. I should hopefully have the motor back in by this weekend.   
×
×
  • Create New...