Jump to content
SAU Community

Recommended Posts

  • Replies 54
  • Created
  • Last Reply

Top Posters In This Topic

I'm also miffed how you managed to fit a diesel nozzle in.....theyre designed differently for the "life challenged" people out there, if you managed to defeat this safety feature you truly are king.

Hahaha!

Was that one of those Diesel Ultimate pumps from BP? They really should change the colour of the handles... Ultimate and Diesel Ultimate are both blue. I park up at the diesel one once but it does say Diesel Ultimate on the handle.

Yeah it was one of those things, thanks for all the smart arse comments it is now sitting at a workshop getting fixed.

This has been hounding me all day as i dont get it.

Did you actually get the nozzle in the hole? If so... HOW?

Or did you realise it didnt fit... and then dribbled half a tank in through the flapper??

Or do you not have a correctly complied car, and its missing filler neck restrictor or something?

This has been hounding me all day as i dont get it.

Did you actually get the nozzle in the hole? If so... HOW?

Or did you realise it didnt fit... and then dribbled half a tank in through the flapper??

Or do you not have a correctly complied car, and its missing filler neck restrictor or something?

It was already stated how this happened, please search the thread carefully.

No seriouslym here in WA we have ultimate diesel now and they look identical to the ultimate 98 pumps with the exception one says ultimate diesel the other say ultimate unleaded 98.

I have parked up next to one a couple of times and thought thats gonna catch someone out one day.

Hope all go's well at the mech, i understand how this could happen m8. Dont worry about all the other comments.

Fair enough it might look the same, but how do you insert a diesel nozzle into an unleaded fuel tank hole, they make them different with a restrictor for this exact reason!

So the diesel ultimate has the same nozzle as unleaded petrol over in WA?

Edited by PM-R33

that would be nasty for the servo to have the nozzle the same size as the petrol nozzles

but then again diesel costs like 50 cents more a litre so that would piss you off even more trickling it in to smaler size nozzle at 1.50 a litre :rofl:

that would suck mate

hope the damage is fixable

Edited by DAS KAMU
It was already stated how this happened, please search the thread carefully.

No seriouslym here in WA we have ultimate diesel now and they look identical to the ultimate 98 pumps with the exception one says ultimate diesel the other say ultimate unleaded 98.

I have parked up next to one a couple of times and thought thats gonna catch someone out one day.

Hope all go's well at the mech, i understand how this could happen m8. Dont worry about all the other comments.

The actual pump you'll find - wont go into the hole.

Thats what people are struggling with.

Diesel by law has to have a different fitting, so that this doesn't occur.

Did you actually get the nozzle in the hole? If so... HOW?

Or did you realise it didnt fit... and then dribbled half a tank in through the flapper??

Or do you not have a correctly complied car, and its missing filler neck restrictor or something?

i was thinking the exact same thing.

If your car is correctly complied and has the filler neck restritor that it is suppose to have then how did you manage to get 30+ litres of fuel in without thinking something is wrong??

From what I've read, we no longer have to have the restrictors in.

They were only mandatory during the time when leaded, and lead replacement fuels were available to stop the mix up there.

Also, if the pumps were designed to avoid the mix up, then the sizes really should be swapped... :rofl:

A petrol motor can run with diesel mixed into it, as it needs REALLY high compression ratios, or a flame front to ignite it. Hence, it'll just make the car run really oily, and blow blue/black smoke until it's all gone.

Now, throw petrol in a diesel motor and watch all hell break loose as the petrol pre-ignites, then ignites the diesel, then bends rods as we've only just started the compression stroke... Not finishing it...

From what I've read, we no longer have to have the restrictors in.

They were only mandatory during the time when leaded, and lead replacement fuels were available to stop the mix up there.

interesting.....so new cars dont have nozzle restrictors anymore? im gonna have to check some cars our for curiositys sake

^^^lol

Fuel filler restrictors haven't been required as part of the compliance process for imports since leaded fuel was phased out over 12 months ago. And thank goodness, because the ones most of them used are rubbish.

If you have one and it keeps clicking off when you try and pump too fast, feel free to pull it out.

In Mildura probably lol, but a lot of people use diesel powered cars these days in the inner suburbs where large trucks rarely venture, so diesel pumps can be anywhere in the station. Some servos have a lock-out feature you have to push to release the nozzle of the pump before you can put it in your car, as a safeguard.

pull offf fuel return and run pump till empty, then fill up with fuel and drain another 10 or so litres out just to flush. We used to get all the hire cars with the same problem.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It can't be some stupidly proprietary video signal coming out of it that only Nissan's can understand. Surely you can just find some generic camera to stuff in there and use hot melt glue/blu-tac/gaffer tape to hold it in place if need be?
    • Update: Tunehouse looked into the problem and identified a wiring issue between the camera unit and the connector. They managed to get it working , but did warn me at some point it will stop working again. From their perspective it is unserviceable and will need replacement. They did some research and found that the new replacement camera would be Approx $1400 supply only (their fitting cost would be $190) . They did provide the part number (28442-JL05B) and a quick google of the part number shows that these are rather expensive brand new (seemingly no longer in manufacture) for the places that still have them in stock, with the used option potentially presenting  the same issue down the track at some unknown point. They are happy for me to supply the part so that they can fit it. Decisions, decisions... I can definitely recommend Tunehouse (thankyou Vee37!). Cost for the diagnosis was as quoted  ($190) , car was ready on time and communication was top notch. Their workshop is super clean and modern, and there was plenty of car candy parked out the front on the day I went.   Would definitely go back.   
    • to fix the voltage drop issue I swapped out the old 150amp alternator which turns out is a brand known for having issues and replaced it with the black 180amp alternator beside it 
    • For anyone interested, the Way Back Machine has that Japanese website archived with pictures, etc: https://web.archive.org/web/20051023225805fw_/http://www.a31cefiro.com/air_con.htm "Simply swapping the wiring of the harness will not allow it to function properly. For the outdoor air sensor and sunlight sensor, disconnect the wiring connected to CN1-11 of the air conditioning harness from the harness and connect the sensor side wiring to earth. For the indoor air sensor, disconnect the wiring connected to CN2-3 of the air conditioning harness from the harness and connect the sensor side wiring to earth. The connector PIN numbers listed here are the genuine A31 PIN numbers. To avoid incorrect wiring, check with a tester before wiring. Also, disconnect the wiring in a location close to the sensor. The disconnected harness side wiring will not be used, so be sure to insulate it." Wish someone sold a conversion harness to just plug-and-play a Kouki 180sx digital climate control into C33/A31. I'm decent with wiring but feeling kinda lazy about taking this on. Edit: Did some more digging and found a helpful Minkara blog post about the conversion as well: https://minkara.carview.co.jp/userid/1831116/car/1360568/2284209/note.aspx "After installation is complete or the battery is replaced, you need to go into self-diagnosis mode and set the internal air recirculation. The way to do it is to "hold OFF with the key on for more than 5 seconds, set the number to 5, then press 卍→C." ↑↑↑It probably won't make sense unless you actually try it (・∀・)." Lol wtf
    • Maybe SAUNSW could see howany members would do a motorkhana day if Schofield's is still available for a reasonable price...
×
×
  • Create New...