Jump to content
SAU Community

I'm Back To Skyline Ownership!


R-sanichi
 Share

Recommended Posts

Hello,

I'm getting an R34 next week! Yep, I gave the company car back to Subaru. My Skyline has a Carrozerria DVD/sat nav/tv unit in addition to the CD/FM/AM tuner.

I know that converting the radio tuner is possible, but has anyone done this themselves? I would much appreciate a bit of advice on doing the conversion and what parts to buy.

Also, can the TV/Sat Nav be put into use in Aus?

Regards,

Michael.

Link to comment
Share on other sites

i had carrozerria tv and sat nav and head unit in my car

all junk, in the bin all of it

its domestic pioneer, the carrozerria brand

not worth researching, asking or trying to convert it

new head units cost nothing these days and in dash tvs are cheap as ebay bargains

Link to comment
Share on other sites

i had carrozerria tv and sat nav and head unit in my car

all junk, in the bin all of it

its domestic pioneer, the carrozerria brand

not worth researching, asking or trying to convert it

new head units cost nothing these days and in dash tvs are cheap as ebay bargains

Agreed. I did however manage to offload the stuff I pulled out for $100 to someone over here. God knows what they were going to do with it ;)

Link to comment
Share on other sites

Congrate on the purchase Michael..

Its just another 31 with a few slightly rounder edges and a newer build date.

come show it off in the east side once you get it!

Thanks mate. I still have a bunch of HR31 stuff at my parents place, so will be compiling a list soon.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Harness update time have had great fun and learnt so much already so far with this project. I started off making both the ignition and injector sub harnesses in the hope any mistakes i made here aren't as hard to undo and learn from as the main harness.  A cool comparison of the old harness using presumably TXL wire and the new which is using Tezel. Also opted to use DTM plugs to keep the whole setup as neat and tidy as possible and tucked the wiring under the coil bracket to try and keep it all from sticking out too much. Although the injector harness, I'm not overly happy with as I'm still using the rubber boots that are supplied with the type of plugs it just looks ugly and sticks out like a sore thumb with the white identifiers so a slight redesign may be done.   Then it was main harness time and most importantly trying to route it nice and away from the heat it will use the OEM heater hose routing which is no longer present to keep the harness up high and secure. it's amazing how much smaller this harness is able to be compared to the old one. plugged everything into the emtron and with the help of the tuner again attempted to start it up and instantly fired up and running smoothly on all 6 which was a big shock to myself. So still some routing and adjusting to be done for the final fit up and installing a knock sensor harness plug which is in the post all has gone surprisingly well.     The old harness for shits and giggles.
    • They do that at random every now and then, with almost no detectable cause. Mine has done it a couple of times (over 25 years!!). Never worked out why.
    • I don't post on here and have been lurking for some time now. Many of the topics have helped me out more times than i can count. I was racing yesterday (11/9) and blew a front right CV shaft. I have spares so I popped a new one in. A thread i read previously said to check the engine mounts if you blow a front CV. Upon inspection, the front right mount was completely separated from the upper plate. This discovery saved me time and money, because i would have blown another CV if i went back out. Just wanted to thank you guys and wish everyone luck with with their builds. (Now if we could only come up with a solution for my power steering belt flying off after hitting the rev limiter, lol)
    • Either way he still need those style of spacer to go into the manifold because the photo he currently has is not going to work 
    • You can just get the injector bosses, which allows top feeds to fit. He can use the same injectors without issue, like these (another option): https://rocketindustries.com.au/af59-2210-rb25-fuel-injector-inserts     The Racework ones look a bit better: https://www.nzefi.com/product/raceworks-lower-injector-mounting-boss-kit-for-r33-rb25det-s14-s15-sr20det/   You could also just get a similar kit like the Radium one by Plazmaman: https://plazmaman.com/product/nissan-rb25det-r33-billet-fuel-rail/?srsltid=AfmBOoogfYq49X0fu2Wdbf8yOf6zt9egyPAif_gn3Qr3G8hzAphhTgOkO70  
×
×
  • Create New...