Jump to content
SAU Community

Recommended Posts

On the look out for a new engine.

my old stock block spun a bearing, althou i managed 10.97s and 212km/h(133mph)

good stuff in those std rb26´s=)

so im planning on running a 8-900hp engine next summer

maybe someone has a forged or stroked engine or such that the want to sell?

complete engine or just bottomend

/michael

Link to comment
https://www.sau.com.au/forums/topic/247470-wtb-rb26-forged-or-rb30/
Share on other sites

On the look out for a new engine.

my old stock block spun a bearing, althou i managed 10.97s and 212km/h(133mph)

good stuff in those std rb26´s=)

so im planning on running a 8-900hp engine next summer

maybe someone has a forged or stroked engine or such that the want to sell?

complete engine or just bottomend

/michael

iv got rb30 bottomend with eagle rods and cp pistons,how much you wanting to spend

if im having an rb30 its got to be prepped for a gtr 4wd.

otherwise ill buy a "new" 4wd bottomend prepped from rips or something like that.

im willing to spend some cash if its the right engine.

so write down the spec and your asking price and we will go from there.

/michael

if im having an rb30 its got to be prepped for a gtr 4wd.

otherwise ill buy a "new" 4wd bottomend prepped from rips or something like that.

im willing to spend some cash if its the right engine.

so write down the spec and your asking price and we will go from there.

/michael

as far as i know it is right i was doin a 25/30 so there shouldnt be any problems with using the 26 i could well be wrong tho

dont know if the rb25 has the same bolt pattern as the rb26 head,never looked at a rb25 so thats more than i know hehe

guess you dont have a custom sump for 4wd application to go with the bottom end?=)

Hi Mike,

Also on the SAU forum :D

I have the following engine available (still in parts so can be build up to spec):

Block:

- HKS pistons

- H beam rods

- STD balanced, polished crank

- N1 oil pump

- N1 waterpump

- Power Enterprise timing belt

- OEM idler, tensioner

- ACL rod+ main bearings

Head:

- Rebuild STD RB26 head with bronze valve guides

- HKS 264 cams with Trust valve springs

- Tomei headgasket

price 4750,- euro shipped

The whole speclist can be changed to your needs. Also porting and other possibilities.

Let me know if this suits you.

Jonne

Edited by Sky-Engineering

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Right, here's a video of the basic operation at least.  This is what you can expect day to day when you turn the car on and it boots from standby.  The only thing from a media point of view I haven't gotten working is for it to autoplay plexamp when it turns on from standby (it works from cold boot) but that's more of a plexamp problem as it will autoplay other music players.  Also attached is my one stray cable.  It's part of the screen's wiring adapters but there's just nowhere for it to go in my car.  I've just now done a bit of research and found a matching port on a 2010-2014 head unit with BOSE.  Mine has no BOSE so that's that case pretty much closed I think.  Plugging in the Infiniti AC panel basically did nothing for me, so that's a dead end as well.  Next port of call is to mess with this CANBUS module and see what I can find from it.  I found this resource containing the DBC files for a 2010+ G37 : https://github.com/icecube45/Dash_InfinitiG37/blob/master/InfinitiG37.dbc I'll now have something to go from when I try to extract my CANBUS data so I can see if the HVAC Mode, Fan Speed, Temperature, etc. match and also the gear shifter position.  It's a pretty big assumption that it's just mismatched CAN signals but considering all the devices in the CAN network are talking to each other (AC can be fully adjusted just with no info on screen) it might be a safe one.  I will report back WhatsApp Video 2025-02-26 at 12.49.10.mp4
    • Thanks for that Paul.  Do you think if I posted a picture you'd be able to remember where it went? 
    • Sorry Duncan, I didn't get a notification for the replies.  Thanks for responding!  It's a full Android device, but does allow you to use CarPlay/AA as well.  This is the one I bought from NaviRS on AliExpress: https://www.aliexpress.com/item/1005006368602668.html?spm=a2g0o.order_list.order_list_main.111.59aa1802JDzQ0E - the 2K 8G-256G CAM variant but it seems to have gone up by £170 since I bought it!  My purchase was £307.14.   It's not the fastest thing in the world but performs perfectly adequately.  It stays on standby unless I disconnect the battery and let it power down, then it's just a fairly standard Android bootup time from cold.  The DSP Equaliser is very nice and made the standard stereo system sound pretty decent compared to the stock screen.  Perhaps I can take a video of it when I get a sec. It *allegedly* supports the reverse camera, but I'm yet to get that working.  It has options for reverse cam (a camera unit can be bought separately) or 360 cameras (also bought separately).  To be fair it doesn't seem to detect that the shifter was put into reverse but I'm working on a theory about this as well.  At the moment I'm going without which is a bit annoying considering the car is an absolute canal barge but so far I haven't caused any damage I'll grab a picture of the wire I'm missing later today when I can get outside.  My theory, by the by, is that not only is the head unit different, but the CANBUS network has different signals for the different years.  I think this because I have a spare AC panel from a newer Infiniti G37 (as opposed to my Nissan panel) which wouldn't control anything except the volume when I had it wired up with the stock system.  I'm going to throw it back in and see if the screen will respond to it.  I've just ordered an arduino CANBUS module so I can have a look at the signals going around the car and see if I can spot anything.  I'm thinking if I can work out what it's expecting vs what it's getting I might be able to translate and relay the signal back but so far just a theory anyway. I also found this on my travels, so far the only one that specifically matches my car: https://www.aliexpress.com/item/1005002822934280.html?spm=a2g0s.imconversation.0.0.33433e5fgttovi If you look at the picture of the before, it has the card reader slot, and the picture of the head unit is exactly the same as the one pictured in my original post.  I asked if they sell the cables separately but sadly they won't.  I didn't want to just buy this one because it's a super old Android version and only dual core - likely slow as hell. 
    • As above, you did refill the coolant and burp the system before running it again didn't you?
    • To be fair - you see the same thing for every clutch. There's always someone making an installation error.
×
×
  • Create New...