jnr_chin Posted December 3, 2008 Share Posted December 3, 2008 not sure if this is the right place for this but anyways if its wrong correct me please anyone has any nistune upgrade on a rb20det engine with stock internals. what extra have you done to gain like 300hp or so? intercooler, turbo, injectors, waste gate, fuel pump and .......... what next . any one with this board and program no longer using and willing to sell me so i can feel that power? Link to comment https://www.sau.com.au/forums/topic/247493-nistune-board-on-my-rb20det/ Share on other sites More sharing options...
bcozican Posted December 3, 2008 Share Posted December 3, 2008 (edited) Nistune + HKS 2530 + HKS Cams + GTR Injectors + Walbro pump + Splitfires + 3" exhaust + FMMIC + pod = 300hp reasonably safely Edited December 3, 2008 by bcozican Link to comment https://www.sau.com.au/forums/topic/247493-nistune-board-on-my-rb20det/#findComment-4297330 Share on other sites More sharing options...
jnr_chin Posted December 3, 2008 Author Share Posted December 3, 2008 Nistune + HKS 2530 + HKS Cams + GTR Injectors + Walbro pump + Splitfires + 3" exhaust + FMMIC + pod = 300hp reasonably safely put something in place of the cams plz dont want to add the pulling of the engine in the recipe Link to comment https://www.sau.com.au/forums/topic/247493-nistune-board-on-my-rb20det/#findComment-4297429 Share on other sites More sharing options...
bcozican Posted December 3, 2008 Share Posted December 3, 2008 put something in place of the cams plz dont want to add the pulling of the engine in the recipe thats just wot im running to get that.... you get get same results minus cams with same setup just add more boost 2-3psi id say but pushing the turbo to its limits.. if not 2530 garrett 2871r - but it a bit more laggy but bit more power Link to comment https://www.sau.com.au/forums/topic/247493-nistune-board-on-my-rb20det/#findComment-4297465 Share on other sites More sharing options...
jnr_chin Posted December 9, 2008 Author Share Posted December 9, 2008 whats the highest amt of boost you run with this to get it at 300hp ? what amt of boost can you run on the rb20det and still be safe? Link to comment https://www.sau.com.au/forums/topic/247493-nistune-board-on-my-rb20det/#findComment-4309059 Share on other sites More sharing options...
raZ1911 Posted December 9, 2008 Share Posted December 9, 2008 U dont need cams for 300 HP Just need 2530, tune, GTR injectors, fuel pump, zorst, pod. Link to comment https://www.sau.com.au/forums/topic/247493-nistune-board-on-my-rb20det/#findComment-4309071 Share on other sites More sharing options...
Ronin Posted December 10, 2008 Share Posted December 10, 2008 Nistune + GTR Inj + Zorst + cam gears + TD06 + Pump + FMIC = 330hp Link to comment https://www.sau.com.au/forums/topic/247493-nistune-board-on-my-rb20det/#findComment-4309464 Share on other sites More sharing options...
jnr_chin Posted December 10, 2008 Author Share Posted December 10, 2008 not sure if this fit right here and makes sense after removing rom chip from ecu and installing type 2 board etc. will the car be able to drive to the tuning shop or have i lost everthing pertaining to moving the car can anyone give me a detailed description from start to be able tomove normally? even if i let a shop do this i like to know the pros and cons of this. Link to comment https://www.sau.com.au/forums/topic/247493-nistune-board-on-my-rb20det/#findComment-4309661 Share on other sites More sharing options...
NISMO Posted December 10, 2008 Share Posted December 10, 2008 Sorry don't know how it works exactly, but in my case Took out ECU and sent away ECU came back with Nistune board and retained all maps which were in my stock ECU Drove it for a week with no probs Took it to tuner to tune :-) Link to comment https://www.sau.com.au/forums/topic/247493-nistune-board-on-my-rb20det/#findComment-4309692 Share on other sites More sharing options...
jnr_chin Posted December 10, 2008 Author Share Posted December 10, 2008 ok from that then i can assume two things its either they installed the parts and sent it back or they did some form of programming aight boss waiting for some other posts Link to comment https://www.sau.com.au/forums/topic/247493-nistune-board-on-my-rb20det/#findComment-4309709 Share on other sites More sharing options...
NISMO Posted December 10, 2008 Share Posted December 10, 2008 I'm pretty sure that when they install the board the ECU retains all maps and settings it had with the board they take out. Like they copy it or something. And then the tuner does his part. Link to comment https://www.sau.com.au/forums/topic/247493-nistune-board-on-my-rb20det/#findComment-4309771 Share on other sites More sharing options...
tenji` Posted December 10, 2008 Share Posted December 10, 2008 we are doin nistunes at my work now also. incase anyones looking for a tuner or a place that can supply, fit & tune. cheers, Polo Link to comment https://www.sau.com.au/forums/topic/247493-nistune-board-on-my-rb20det/#findComment-4309797 Share on other sites More sharing options...
jnr_chin Posted December 10, 2008 Author Share Posted December 10, 2008 anyone willing to share the secret caz i am alll the way in ja and just needs some tips Link to comment https://www.sau.com.au/forums/topic/247493-nistune-board-on-my-rb20det/#findComment-4309828 Share on other sites More sharing options...
Psymon Posted December 10, 2008 Share Posted December 10, 2008 Pretty sure that you still retain your base maps once the nistune hardware is installed. Link to comment https://www.sau.com.au/forums/topic/247493-nistune-board-on-my-rb20det/#findComment-4310114 Share on other sites More sharing options...
Adriano Posted December 10, 2008 Share Posted December 10, 2008 Matt sends you the base maps when you register, then you can load them into the chip. Not sure weather there was anything on the chip, as i just loaded a bin. file to my liking. Link to comment https://www.sau.com.au/forums/topic/247493-nistune-board-on-my-rb20det/#findComment-4310248 Share on other sites More sharing options...
daisu Posted December 10, 2008 Share Posted December 10, 2008 Pretty sure base maps are available on the nistune forums. Link to comment https://www.sau.com.au/forums/topic/247493-nistune-board-on-my-rb20det/#findComment-4310402 Share on other sites More sharing options...
jnr_chin Posted December 10, 2008 Author Share Posted December 10, 2008 INTRODUCTION Base Image Programmer All NIStune real-time boards require the “base image” to be programmed before they can be used. This is normally done during manufacture – and cannot be changed by the end user. Professional tuners who purchase multiple boards may find it necessary to change the base image, so we have made the programmers available for this purpose. JUST A LITTLE EXTRA READING Link to comment https://www.sau.com.au/forums/topic/247493-nistune-board-on-my-rb20det/#findComment-4310906 Share on other sites More sharing options...
STATUS Posted December 11, 2008 Share Posted December 11, 2008 i thnk you should read this..... make life 1000 times easier. http://www.nistune.com/documentation.html awesome product, they also have the best aftersales and purchase / delivery times of any ecu dealer ANYWHERE. Link to comment https://www.sau.com.au/forums/topic/247493-nistune-board-on-my-rb20det/#findComment-4313636 Share on other sites More sharing options...
jnr_chin Posted December 12, 2008 Author Share Posted December 12, 2008 i thnk you should read this..... make life 1000 times easier.http://www.nistune.com/documentation.html awesome product, they also have the best aftersales and purchase / delivery times of any ecu dealer ANYWHERE. yeah matt that little bit of info is coming straight from there thats why i said just a little extra reading thanx Link to comment https://www.sau.com.au/forums/topic/247493-nistune-board-on-my-rb20det/#findComment-4314952 Share on other sites More sharing options...
BeEnAr Posted December 13, 2008 Share Posted December 13, 2008 i thnk you should read this..... make life 1000 times easier.http://www.nistune.com/documentation.html awesome product, they also have the best aftersales and purchase / delivery times of any ecu dealer ANYWHERE. Not wrong there! I sent my ECU up on a thursday to my father in-law to remove my Mines Chip, we got it the Friday. Took the day to remove all the epoxy and still had to cut the chip out! Gave it to Pete (half of PLMS) who works on the desk next to him, Pete checked out the Mines map which was leaned out in the higher revs, speed cut removed and had 4deg of timing added across the whole map (yes that is all Mines did) then he fit the NIStune board and sent it all back to me very well packaged on the Tuesday. I got it on the Wednesday. Overnight delivery Via registered post from SA to VIC = AWESOME! Get mine tuned on Friday at Status Tuning, can't wait. Have the cable and software on my spare laptop too, it's very cool stuff. Link to comment https://www.sau.com.au/forums/topic/247493-nistune-board-on-my-rb20det/#findComment-4315402 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now