Jump to content
SAU Community

Where To Buy The Right Offset Rims?

Tokyo Geoff
 Share

Recommended Posts

Tokyo Geoff Enthusiast

Tokyo Geoff

Posted
Posted

Howdy

I want to buy some new rims but not Enkeis or RAYS as I think they are too soft for shite Sydney roads. BUT where can I buy some 18s or 19s with the right offset which I think is around +22 for 19s. Everywhere I ring wants to flog +30s :D

Cheers Geoff

Link to comment
https://www.sau.com.au/forums/topic/247797-where-to-buy-the-right-offset-rims/
Share on other sites
str8g Contributor

str8g

Posted
Posted
Howdy

I want to buy some new rims but not Enkeis or RAYS as I think they are too soft for shite Sydney roads. BUT where can I buy some 18s or 19s with the right offset which I think is around +22 for 19s. Everywhere I ring wants to flog +30s :D

Cheers Geoff

Its pretty tuff mate, I got my rims with a silly offset of about +35. So i had to by some spacers to get the perfect fit. You can put an order with tempe tyres and they can get you rims with the right offset you want. (they get there rims ordered from the US) The only prob is that you will have to wait a while and pay more

Tokyo Geoff Enthusiast

Tokyo Geoff

Posted
  • Author
Posted
You're saying ENKEI and RAYS will just get bent easily going over bumps in our roads ???

Well, I just had a set of RPO3s and they went out of shape very easily and had to be worked back into round. As far as I remember I never hit a pothole once, but the old Star Corps bounced off everything, no probs

n15m0 Grand Master

n15m0

Posted
Posted
Well, I just had a set of RPO3s and they went out of shape very easily and had to be worked back into round. As far as I remember I never hit a pothole once, but the old Star Corps bounced off everything, no probs

Enkeis aren't the best wheels to compare if you're after a quality jap wheel. I've had a dozen set of rays, work, ssrs you name it...never had a problem.

whtbox Community Regular

whtbox

Posted
Posted

Rays have some of the wheels that are made with good Quality Cast which is weaker for sydney road. But if you go to something like Volk Racing and most of them are Forged and most of them are Freaking strong. I bent one of my TE37 once when i accidently ran into a curb and that already bent all the suspension arm as well. So Volk Racing Forge are a super strong stuff.

If you want a cheap one go with Casting wheels, If you want a good quality, light and strong go with Forged wheels.

My Le37 Topsecret is running on 19x9.5 +22 and 19x10.5 +22

russky Collaborator

russky

Posted
Posted
Well, I just had a set of RPO3s and they went out of shape very easily and had to be worked back into round. As far as I remember I never hit a pothole once, but the old Star Corps bounced off everything, no probs

Got Star Corps... They break and bend very easily... Guess it depends on luck. Lesson learnt is not to buy anything chinese...

rs73 Grand Master

rs73

Posted
Posted

would it be depending on the shape of the spokes? some cheap rims tried to have that same look with a forged jdm rims, but they're not forged... so go figure...

also another thing I noted at the back of my rays there's a 690kg imprint. I reckon this will be the max weight limit that each rim can handle before on to the breaking point... if the one you have breaks too easily, perhaps it's time to see what's the weight limit on your rims and what car you have it on...

A V35 is around 1500kg so on a good balance it should be around 370-400kg each corner. different story if hitting a pothole during a hard braking that could transfer most of the vehicle weight to the front so the loading will be greater.

NISMO Grand Master

NISMO

Posted
Posted

I've had Enkei before which have bent after a nice hit on a timber i didn't see, but have also never had a prob with a few different sets of Forged Rays.

Unless your smacking into large potholes I'd be surprised to see a forged rim "bend" out of shape.

Another option is don't go for ridiculously thin tyres.

Stephen Thorpe Proficient

Stephen Thorpe

Posted
Posted

35 series?

In my opinion, I don't care about that small strip of rubber... I have 40's at the moment and I will never go less than that.

I'd love 19's or more, but I don't want to drive like a drunk grandma (slow and weaving all over the place)

The roads where I am are absolutely awful, worse that any I have ever found in Melbourne or the suburbs of.

Also worse than I saw in Sydney a few years ago.

I can handle rough roads, but not potholes you coule hide in...

Tokyo Geoff Enthusiast

Tokyo Geoff

Posted
  • Author
Posted
35 series?

In my opinion, I don't care about that small strip of rubber... I have 40's at the moment and I will never go less than that.

I'd love 19's or more, but I don't want to drive like a drunk grandma (slow and weaving all over the place)

The roads where I am are absolutely awful, worse that any I have ever found in Melbourne or the suburbs of.

Also worse than I saw in Sydney a few years ago.

I can handle rough roads, but not potholes you coule hide in...

Worse than Sydney :( Shirley you're joking Stephen. Good advice though for sticking with 18s though.

n15m0 Grand Master

n15m0

Posted
Posted
Well then Sydney & Geelong people shouldn't be considering buying the R35 GTR at all... as the thing's got 20" rims... ?

Imagine bending the rims each weekend you took the car for a drive.

The R35 has a larger rolling diameter compared to the previous skylines and hence still comes wrapped in 40 profile tyres from factory on the 20" rims.

Stephen Thorpe Proficient

Stephen Thorpe

Posted
Posted
Worse than Sydney :) Shirley you're joking Stephen. Good advice though for sticking with 18s though.

I wish I was joking, but alas I am not...

the roads are truly awful...

Unless you have an x5 or something similar, an 18 with a 40 is the most I would even look at...

as for my 225/40R18 I wanted to go back to 17's

Sidewall is good... unless on the track...

then check out a track car and you mght be surprised.

n15m0 Grand Master

n15m0

Posted
Posted
In what way is there a difference?

I think he is referring to the extra bumpy ride due to less tyre between the wheel and road. 19" wheels on a V35 should really be on 35 profile unless you are running a wider tyre on the rear like 275s to compensate overall diameter.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Murray_Calavera
      The Evolution Of "night Fury"

      By Murray_Calavera · Posted

      Price seems pretty good to me. Also seems a hell of a lot cheaper then buying another vehicle that only ever gets used for towing.  I'm a long way from you mate, I'm a couple of hours out of Brizzy. 
    • niZmO_Man
      Dumb rich kid tries modding for the first time

      By niZmO_Man · Posted

      New [400]Z, they're available in manual and you don't have to worry about parts scarcity. 
    • turbo76lx
      Torana Lx Gtr Hatch, Lots Of Pictures

      By turbo76lx · Posted

      Just planning to have the wiring neat and hide as much as possible.
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      The sodium acetate, mixed with citric acid, doesn't actually buffer each other. Interestingly though, if you used Sodium Acetate, and acetic acid, THAT becomes a buffer solution. Additionally, a weak acid that can attack a metal, is still a weak acid that can attack a metal. If you don't neutralise it, and wash it off, it's going to be able to keep attacking. It works the same way when battery acid dries, get that stuff somewhere, and then it gets wet, and off it goes again breaking things down. There's a reason why people prefer a weak acid, and it's because they want TIME to be able to be on their side. IE, DIY guys are happy to leave some mild steel in vinegar for 24 hours to get mill scale off. However, if you want to do it chemically in industry, you grab the muriatic acid. If you want to do it quicker at home, go for the acetic acid if you don't want muriatic around. At the end of the day, look at the above thumbnail, as it proves what I said in the earlier post, you can clean that fuel tank up all you want with the solution, but the rust that has now been removed was once the metal of the fuel tank. So how thin in spots is your fuel tank getting? If the magazine on the left, is the actual same magazine as on the right, you'll notice it even introduces more holes... Well, rust removal in general actually does that. The fuel tank isn't very thick. So, I'll state again, look to replace the tank, replace the fuel hanger, and pump, work out how the rust and shit is making it past the fuel filter, and getting into the injectors. That is the real problem. If the fuel filter were doing its job, the injectors wouldn't be blocked.
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      Despite having minimal clothing because of the hot weather right now, I did have rubber gloves and safety glasses on just in-case for most of the time. Yes, I was scrubbing with my gloves on before, but brushing with a brush removes the remaining rust. To neutralize, I was thinking distilled water and baking soda, or do you think that would be overkill?
×
×
  • Create New...