Jump to content
SAU Community

Aftermarket Ecu(haltech) From Stock Ecu

nemesis101

By nemesis101,
in Engines & Forced Induction

 Share

Recommended Posts

nemesis101 Apprentice

nemesis101

Posted
Posted

I currently have a R33 S1, GTS-T, a couple of minor mods, 10psi of a MBC, r34-GTT side mount intercooler, exhaust and intake.... keep in mind this car is an everyday driver....

im happy with the current power it makes. It is however running a stock ecu with 10psi.....therefore you see a big black smoke exiting the exhaust if i give it some stick....

I have a friend who is selling me an haltech interceptor ECU.....my question is, is it worth the conversion??... what will i gain from it?....drivability?...more power?? smoother power?? ...better fuel consumption?....what is the most noticeable improvement i will gain from an aftermarket ecu??

Because once i have bought the ECU, i have to take it for a tune as well.....which is $400-$500.....

Has anybody tried the haltech interceptor??....

who is the best place to tune if i do decide to get it??...

Ninja_09 Apprentice

Ninja_09

Posted
Posted
I currently have a R33 S1, GTS-T, a couple of minor mods, 10psi of a MBC, r34-GTT side mount intercooler, exhaust and intake.... keep in mind this car is an everyday driver....

im happy with the current power it makes. It is however running a stock ecu with 10psi.....therefore you see a big black smoke exiting the exhaust if i give it some stick....

I have a friend who is selling me an haltech interceptor ECU.....my question is, is it worth the conversion??... what will i gain from it?....drivability?...more power?? smoother power?? ...better fuel consumption?....what is the most noticeable improvement i will gain from an aftermarket ecu??

Because once i have bought the ECU, i have to take it for a tune as well.....which is $400-$500.....

Has anybody tried the haltech interceptor??....

who is the best place to tune if i do decide to get it??...

Got an Interceptor in My 33 series II. dude !!! DON'T DO IT. BIG MISTAKE

Ninja_09 Apprentice

Ninja_09

Posted
Posted

I can tell you lots of reasons why not to do this...

First of all it's not a full ECU. Just a piggyback. So you are still running from ur stock ECU

oh !! man where to begin ????

ok.. here's my story,

I bought the Interceptor about 2 years ago and it costs 300-400 just for wring it.

took it to 3 different tuners still nothing but disappointment..

It can't control boots cut, MAF cant be clamped

I'm only running 10psi. I even called up Haltech and they admitted that interceptor may not work on R33 well. (something like Interceptor can't get R33 triggers correct )..

Anyways if 3 different tuners can't get it right it has to be the unit...

Man ... get a full ecu or even SAFC or Emanage will do a better job than this.

but hey I'm not anti-Haltech, their full ECUs (e11) are very good units if you can afford..

There are soooooo many options out there for R33s... and as far as I know and from my very expensive experience Inerceptor is not one of them

it's worse driverbility, more fuel consumption etc ..etc...

Adriano Grand Master

Adriano

Posted
Posted

Ninja, i think you need to find a good tuner, many have had good results with the minor mods you have. Another ecu you may wish to consider for a smaller budget is an emanage ultimate. Both are heaps better than a safc. Having said that look up the thread in the stagea section about the Jaycar fuel trimmer, ive had good results for up to 200rwkw with the stock ecu.

nemesis101 Apprentice

nemesis101

Posted
  • Author
Posted

Sounds like the haltech interceptor is more trouble then its worth................. sounds like its cheaper and more reliable leaving the stock ECU in there.....correct??

Finding a tuner to do it right could be a problem....from the sounds of thing....i was going to get c&v performance in carringbah to do it....but not after the senninigans that you guys mentioned....might rethink my option

Ninja 09 what negative result did you experience from it??

Ninja_09 Apprentice

Ninja_09

Posted
Posted
Sounds like the haltech interceptor is more trouble then its worth................. sounds like its cheaper and more reliable leaving the stock ECU in there.....correct??

Finding a tuner to do it right could be a problem....from the sounds of thing....i was going to get c&v performance in carringbah to do it....but not after the senninigans that you guys mentioned....might rethink my option

Ninja 09 what negative result did you experience from it??

basically, you should be able to clamp the MAF at 5V using the interceptor so that the stock ECU would not boost cut, Tuners say that it's impossible to do this using interceptor.. so through out the rev range (in any gear), 3k, 4.5k, or even 5.5k it boost cuts..there were so many other issues tuners mentioned but I don't know how to explain. First I thought it's a tuner problem and kept changing the tuner.. and after 3 top rated tuning shops, Im convinced this unit is not for my car...(I learned the expensive way)

Same time had a friend using an interceptor in his Supra (uses a MAP sensor) worked perfectly running well over 300rwhp

I got 266rwhp at the moment where my turbo could easily push over 300... But I'm getting the stock ECU remapped. hopefully remap will work fine and I can use the interceptor on top of that if I have to..

Have you considered ECU remap or Nistune?? both these are cheaper options .. If you are not planning any further mods in the futuer, remap is ideal.

Pal Veteran

Pal

Posted
Posted

Ok, a interceptor will work perfectly in any model skyline from R32,33,34. Yes it does clamp the boost cut signals and yes it will control the fuel and timing by intercepting the original signals going to the factory ecu. It will even control the factory boost control solenoid. In the case of a supra for example you can even use the interceptor to clamp the signal to the speed cut and do away with the extra cost of purchasing a speed cut defender.

There is not one company in WA that has been satisfied with the Emanage unit which is actually just a piggy back unit the same as a Haltech. 90% of all problems relate to the installer and the tuner.

I 'm surprised that Haltech would ever say that they cant support an interceptor on a R33. just check there web site and you will see a base map for an interceptor there to suit R33.

A PowerFC is a good cheaper alternative to a stand alone ecu but I believe that the interceptor will suit the application of minor mods a lot better.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GabsReDeal
      R32 GTS (RB20DE) clogged cat

      By GabsReDeal · Posted

      Appreciate the feedback. It is street car, but not a daily. Last week I got a quote from a good exhaust shop for a decat, one which is bolt-on, bolt-off to be easily replaceable. I got quoted for around €150. I usually do push the motor, but I wasn't in this case to make sure that no damage is done until I get the cat sorted. I think it's best to also ask the exhaust shop for the other option and see what they can do. If (big if) I were to decat though, would it be best to tune the car or would the stock ECU handle it? As far as I know, the stock ECU is not tunable and that would require additional purchases.
    • Milkmun
      R32 GTS (RB20DE) clogged cat

      By Milkmun · Posted

      As above, definitely bash it or get it replaced with a high flow unit.
    • niZmO_Man
      R34 Gtt Wheel Offset Advice

      By niZmO_Man · Posted

      get some flares on them, or wider guards haha
    • Watermouse
      Hypergear Turbochargers and High flow Services Development thread

      By Watermouse · Posted

      Another question sorry, what stainless do u use in the turbo external WG plumb back piping? Is it 321, 316 or 304?
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      Right, its been a while for updating this car, but I made some small but important progress today. In the end I bought an Ecutek dongle from the Australian distributor Tunehouse (for local hardware support) but have gone with a remote tune from Racebox in the US (because they have done millions of these, and I could not find any tuner where I could access the tune anyway as they are all password locked). The App is reasonably easy to work with, but the PC software reminds me of Haltech's ECU Manager that you need to use with the Plat Pro ECUs, it is a nightmare.  Anyway, I sent the details over, got back a tune file and a request for data logs. I finally got a chance to access a private test track today as they want redline logs in 3rd and 4th, and have sent them back for the first round of reviews. The main difference in the tune is going from 1.0 (stock) to 1.3 bar (19psi), although I'm sure is a lot of other stuff in the background. Keeping in mind this is a dead stock car with 125,000klm, this is what the App's performance test claimed: Before After Interesting to note that both 400m tests had the same terminal speed (158klm/h) but different ETs. And no, the speed limiter seems to be higher than that at 186kl/h. Summary of the key logged parameters for the 3rd and 4th gear runs were: Those little turbos were certainly whizzing at 200,000rpm+.  Also I'm really not that excited about oil pressure 55psi at redline so I think I'll go thicker than 5w30 (nissan recommend 0w20....) and see if that improves it. Other than that (and the big boost spike....) everything looks good as a start to me.
×
×
  • Create New...