Jump to content
SAU Community

Recommended Posts

Hey guys,

Finally decided to get an EOI on my R33 GTS-T Rolling Shell. This was my show car project before i purchased the GTR and i can't stand seeing it sit idle in the shed any longer.. I am getting expressions of interest at this stage and if you want to make an offer feel free. Won't be accepting anything lowball, there has been a phenomenal amount of money spent on the vehicle and i do realise im not going to get it back like every car enthusiast but i will only accept reasonable offers. Just to comply with the rules ill put a figure of 10k, i still would like people to make whatever offers they feel appropriate. Here is the info -

Body

- Full 90% bare metal respray in House of Kolor Planet Green (Imported from US) with customized metallic flake (went for a finer flake)

- Body Kit is 400R, Front bar has been customised by removing some vent holes to clean up the appearance.

- Body kit has been completely molded to the car not including the front bar, this process is very time consuming and expensive and it looks amazing.

- Door handles and antenna both shaved

- Guards (Under guards where wheels sit) have been completely polished back to bare steel and re-coated lightly with black sound deadener (To make it look new)

- Under body of car has been cleaned and resprayed black to make it look new

- Carbon Fibre Bonnet

- M3 Mirrors (Electric)

- Shaved indicators from front guard

- Drift spoiler molded in

Suspension

- HSD Systems Coil Overs Type HR (Good Ones)

- EBC Greenstuff Pads

- DBA Slotted Rotors

- All Arms / Sub Frame etc powder coated in silver

- All Bush's and rubbers replaced with polyurethane whiteline items

- Camber Kits both sides

- Whiteline rear Sway Bar

- Rear Subframe alignment kit

- All Bolts sandblasted and electroplated chrome

- Driveshaft bolts replaced

- HICAS Lock Kit (Tomei electric type)

Miscellaneous and Brand new parts from Nissan

- Bonnet support rubbers replaced

- Rear Boot rubbers replaced

- Headlight / Taillight bulbs all replaced

- All windows reseated and new seals installed

- New drivers electric window mechanism (entire sliding assembly that window runs in)

- Wheels bearings / hubs replaced (The complete bearing assemble and unit the wheel bolts onto)

- Headlights with second set of headlight covers (custom design moulded in without plastic face)

- Tail Lights

Now the only ISSUE with the car is minor damage on the rear end. When the car was being removed from the hoist at the workshop they rolled it back to fast and the exhaust hit the ground and pressed against the rear bar cracking the rear left hand side of the rear pod. I have been quoted between 400 and 800 to fix this from a number of shops. I was told because the paint has pretty much never seen the sunlight matching the colour and blending it would be simple! Lucky i guess...

post-4555-1228886240_thumb.jpg

The diff has also been rebuilt and the rear cover polished. Car is rolling on Racing Hart Type CR 19" Wheels with 85% Rubber. I will remove parts to drop the price if anyone requests it, the car also has another complete interior wiring loom to go in it which i will include. I also have random parts to go with it which are negotiable like a Trust V-SPL Cooler kit, Cusco catch can, Isotta steering wheel, gear know and hand brake lever / boot. I have forgotten a bunch of stuff im sure but i will update as i remember! Inspections are welcome.

Contact here or on 0432600397 Call or SMS first preferred.

PICS - The orange one is the previous colour and i'm using it to show what the front bar looks like!

post-4555-1228885507_thumb.jpg post-4555-1228885525_thumb.jpg post-4555-1228885538_thumb.jpg

.

post-4555-1228885551_thumb.jpg post-4555-1228885559_thumb.jpg post-4555-1228885605_thumb.jpg

.

post-4555-1228885689_thumb.jpg post-4555-1228886722_thumb.jpg post-4555-1228886787_thumb.jpg

.

post-4555-1228886845_thumb.jpg

Edited by Got Boost?
how much for the shell ???

Without rims i'm currently looking at offers around 8k. Or do you mean literally the shell minus suspension etc? Im also willing to work something out along those lines

Edited by Got Boost?

dude u have a text awaiting reply in regards to interior and gauges i bought off u back at easter hit me back asap plz

  • 7 months later...
  • 1 month later...

Bump! Willing to strip parts to make shell cheaper. Can remove wheels / suspension / bonnet and other gear if required. Really want this thing out of the shed.. hit me with offers.

  • 3 months later...
  • 2 months later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That ring thing is interesting how it's holding everything together 
    • Hey guys. I have a 400R on its way to Australia from Japan currently and have a few questions I’m hoping others may be able to help with.   Wondering if anyone here has had any luck getting the Sat nav unit to work in Australia!? Assuming the Stereo is as simple as a band expanded and tv won’t work?  Seeing as they’re based off a Q50 which is Aus delivered is there any way to link that system to the nav? Nav modules and head unit are different part numbers and appear slightly different at the rear with plug ins etc. can I put my xtrail sd card into the rv37 and will that convert the maps or update to Australian? Has anyone got any advice here?     also has anyone fitted the factory remote start and Security system once it’s landed in Australia? I put an enquirey to Nissan Japan in via a third party, and they suggested it needs a Nissan Japan dealers device to setup and couldn’t guarantee if one here could do it or not. They can supply and I can physically fit it but to setup I would need a dealers device. Any information here would be appreciated also. I’ve seen one here with it fitted already prior to leaving Japan at a dealer/inporter, so clearly passes compliance and works when fitted Japan and doesn’t need changing here.      also, does the tyre inflation sensors work here? Does anything change with them when the vehicle arrives? Where are they actually situated? I’ve read they have batteries and they need to changing at times and seems like resetting involves the nav system?    any help here would be appreciated and any other aust specific information to help would be great. Looking forward to see what the current generation skyline is like and eager to see how many of the gadgets can be utilised here.  Thanks in advance 
    • Do need to take it with a pinch of salt. One of the adapter failures, they clearly had setup issues with the flywheel.  One of the slipping ones I spoke to and it was pretty clear the throwout was riding, rather than fix, just swapped to a new clutch.    These clutches are being put in anything from 5k offroad 4x4 beaters, GR yaris, 500hp commodores to 1200hp barra monsters. Bound to be some issues in some of them when they are not a simple bolt in affair due to the changes in height.    There is a lot going on in this picture and unless I did the job myself no way to tell what really happened. 
    • I did this mod in 2019  You just have to modify the top bracket of the ABS/TC/Fuel Pump Control ECU so it sits more upright and closer to the back seat and run a good quality positive battery lead from the engine bay, the negative lead i just bolted down to the body in the boot.
    • Damn... Not the feedback I want to hear.
×
×
  • Create New...