Jump to content
SAU Community

Plug In LT-12 Microtech Suit R33

Roy13
 Share

Recommended Posts

Roy13 Enthusiast

Roy13

Posted
Posted

I am thinking of selling my Plug and Play LT-12 Microtech for an R33 GTS-T or a RB 25DET equiped car! Asking around $1500 as it has a full matrix mode tune worth $600 to suit a standardish car with around 200rwkw's. Total cost $2300 still under warrenty.

Tuned to suit- STD motor with a FMIC.

NEW price $1200 its got to go!

Link to comment
https://www.sau.com.au/forums/topic/24841-plug-in-lt-12-microtech-suit-r33/
Share on other sites
Roy13 Enthusiast

Roy13

Posted
  • Author
Posted

Yes you can probably but when it comes down to you'll find it costs you a lot more than that as i also could have got mine for $1395 but it ended up costing me $2300. Dont forget the expensive tuning.

So tell me how long have these LT-16 been out and what close loop operation do they have?

Roy13 Enthusiast

Roy13

Posted
  • Author
Posted

Sorry didn't read you clearly there dsturbd yes the tune would be almost spot on for that aplication and im always willing to show or talk anyone throught the install tune as ive been there done that before, those mods you have done with a std computer will work perfect with the program on it. I had 187rwkw@12psi running about 11.8:1 to try and eliminate any nasty lean outs.

KamikazeR33 Grand Master

KamikazeR33

Posted
Posted

blitz i have no problems with his price, i was just making an offer.

roy13: to tune it costs me next to nothing!

my mechanic (who is also a good mate) has helped developed microtech products (read calibra)

he has all the knowledge to tune it and other ecus

he tuned my safc for nothing

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Nightmare_mistress_R33
      CD009 RB Conversion

      By Nightmare_mistress_R33 · Posted

      Yep that is correct. It allows you to adjust the short throw range from what I can tell
    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      Car has been running great, I've put about 300km's of break in time on it. First thing that stands out with properly sealing rings is no more noticeable crankcase smell coming out of my catch can. This may seem insignificant, but the constant smell while driving around was infuriating. It's also nice to see my oil level remain stable. Two new issues have developed that I only noticed this weekend though. There's a very noticeable driveline vibration past 100kmh. I only noticed it now as I've been babying it under 100kmh in the backroads. This comes as no surprise as I'm running a one-piece shaft, and I paid zero attention to my driveshaft angle when I put everything back in. I also have a fair bit of voltage drop on hot starts. The starter audibly is forcing. No issues on cold start though. I must not have removed all the paint under my main block ground during assembly. I'll try and take care of both those issues this week once the kids are asleep.  I also received all the parts I was missing for my direct port setup. I will hopefully have pictures of that up soon. I'm hoping to get back on the dyno the week of June 30th as I'll be on vacation. I'm confident I should be able to make north of 500rwkw on pump gas and WMI. I'll go back again later this summer with E98, but I want to confirm my ethanol content sensor is working properly first. I've never seen it read anything but 11%. This makes sense for our 10% ethanol content pump gas here, but I would expect the occasional movement between fill ups. 
    • jez NF
      The Evolution Of "night Fury"

      By jez NF · Posted

      75% complete. Will now need to get a new axle with 5x114.3 hubs and then figure out how to customize some mudguards for it once the wheels are on.
    • jez NF
      The Evolution Of "night Fury"

      By jez NF · Posted

      Trailer prep is underway... Lined up the wheel to get a rough indication of how it would sit Then removed all the bits (as far as possible) and gave the frame a light sand and quick lick of paint   Then added some carpet
    • JC71
      gauge needle removal

      By JC71 · Posted

      okay, so I figured this out, removed needles and reinstalled after swapping the gauge face on my triple gauge for my ER34, all work and look good. I tried to do the same for the main cluster, but the main cluster gauge faces are dished, the replacement gauge face are flat, so due to the dish in the org face ,mounting backing plate (clear) and depth of the needle, the flat gauge face will not work. I notice that R34 gtr gauges are flat, appears to be different clear backing plate that aren't dished. are these available, or what have others done to install flat gauge faces?
×
×
  • Create New...