Jump to content
SAU Community

Recommended Posts

Hey guys, the skyline has been off the road for a while (6mths) and now wont start. Battery was flat and not looking like holding charge, but has now been replaced. Car is cranking over but not really looking like starting. I've made a visual inspection of all the fuses (they all look fine), but other than that I'm not really sure what to check. I'm guessing the fuel would be well and truly stale by now, but surely the car would still start? Failing any tips to get that car started, can anyone recommend a decent mobile mechanic (adelaide area) lol.

Edited by mind_riot
Link to comment
https://www.sau.com.au/forums/topic/248611-help-r33-wont-start/
Share on other sites

Hey guys, the skyline has been off the road for a while (6mths) and now wont start. Battery was flat and not looking like holding charge, but has now been replaced. Car is cranking over but not really looking like starting. I've made a visual inspection of all the fuses (they all look fine), but other than that I'm not really sure what to check. I'm guessing the fuel would be well and truly stale by now, but surely the car would still start? Failing any tips to get that car started, can anyone recommend a decent mobile mechanic (adelaide area) lol.

Hi!

Im not shure how technical you are, but the first thing I would have checked when a car is turning but nothing happens, is:

1. Check that you have fuel pressure

Different engines has different ways of checking this....

2. Check that you have a spark.

Normaly you could take the plug out and hold it against metal, and turn the ignition, and a spak should apair. But remember to eather disconect fuel line or disconect all sparkplugs.

And if you have all of this, it should start, and it may be bad fuel or timing is way of or something like that.

Hey guys, the skyline has been off the road for a while (6mths) and now wont start. Battery was flat and not looking like holding charge, but has now been replaced. Car is cranking over but not really looking like starting. I've made a visual inspection of all the fuses (they all look fine), but other than that I'm not really sure what to check. I'm guessing the fuel would be well and truly stale by now, but surely the car would still start? Failing any tips to get that car started, can anyone recommend a decent mobile mechanic (adelaide area) lol.

Probably not this but i had a similar problem, came up out of more or less nowhere. Turned out to be my CAS giving me a hazzle, changed that and the problem i slong gone :D

Other then that, as stated, check spark (I'd start with that) and then fuel, maybe a fuelfilter change or the pump gone bad?

Cheers!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, it was a bit of confusion with me, I rang and asked if they had a boot for a soft top, and then the paint shop when they rang and were asked if it had a hard top on it, which it does, just not a PRHT....LOL Meh, whilst frustrating for all concerned it isn't a war stopper and should be a thing of the past in a week or two In other N/A related news, car is booked in at the end of the month for the cams, springs, retainers, harmonic balancer and retune  I might even pull the lazy arse card and get them to do a full service on it whilst it is there
    • Factory LSD is supposedly a 2 way with a very conservative cam. If you've already tried adding friction modifier to the diff oil and it still locks up too much for your liking you might want to adjust the ramp rate on the cam to be more like OEM instead of reducing initial torque even further. People claim the 8 kgf-m disc kit for the OEM LSD is still very streetable but I've never been able to compare everything side by side on my own.
    • Oh man, at least it sounds they've accepted they stuffed up and not put it back on you...could see some confusion if they asked if it had a hardtop or not, and you've answered truthfully but maybe not answering their real question which is what roof did it have from the factory! Glad your keeping it N/A 2.5
    • Nah, I much prefer colour matched Talking about colour matching stuff, the new/used boot lid turned up, all painted up perfectly......aaaannnndddd, it's for a power retractable hard top, not a soft top.....LOL They are now sending a boot to fit a soft top.....,  whilst frustrating, life is like that sometimes, sometimes you just need to dodge, duck, dip, dive and, ummm, dodge.
    • You would need to paint your hardtop again though
×
×
  • Create New...