Jump to content
SAU Community

My04 Impreza Rs For Urgent Sale!

ryan_r33

By ryan_r33,
in For Sale (Private Whole cars only)

 Share

Recommended Posts

ryan_r33 Explorer

ryan_r33

Posted
Posted

Up for sale is my 2004 MY04 model Manual Subaru Impreza RS for $18,000 O.N.O.

Kilometres - 77,000

Body - Sedan

Colour- Silver

Interior Colour- Black

Transmission- 5 speed Manual

Engine - 4 cylinder Unleaded Multi-point injected 2.5L (2457cc)

Reg Plate- RY1988

Reg Expire- JUN-2009

The car is lowered 3 inches on King Springs, has colour coded side skirts, the windows are tinted, has an X-Force diffback cannon muffler (also have OEM muffler if buyer wants), full service history and log book, driven by a non-smoker, very well looked after and is in excellent condition. Registered until June 2009. Never any accidents.

The car's sound system consists of:

- Kicker 4 channel amplifier

- Pioneer head deck with ipod control and 4 pre-outs

- JL front component split speakers

- Alpine Type S rear 6 inch speakers

- Alpine Type S 12 inch sub woofer

The car is awesome to drive and is very safe. It features a MOMO steering wheel and racing bucket seats.

Selling as i am getting a new car and i need to sell it ASAP. Regretful sale. Very reliable car. Great for a P plate driver. The number plates on the car currently will be swapped prior to sale. PRICE NEGOTIABLE.

To see the car on carsales copy the link below into your browser:

http://carsales.com.au/used-cars/private/S...ke=SUBARU&_ _Ns=pCar_PrivateSpecialFlag_Int32|1||pCar_ImageCou nt_Int32|1||pCar_LastModifiedDate_DateTime|1&__N=4 294963801%201216%20834%20285%20257%204294963800&di stance=10&silo=1003&seot=0&__Nf=p_GeoLocation_Stri ng|GCLT%20-33.34321%2c151.4785%2017.1&Cr=0&__Nne=20&trecs=8&M odel=IMPREZA&__sid=11DE2CB1E115

thanks for looking.

Link to comment
https://www.sau.com.au/forums/topic/248629-my04-impreza-rs-for-urgent-sale/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Komdotkom
      High temp brake fluid?

      By Komdotkom · Posted

      Reasonably hard, although I haven't run it with the new Endless setup yet. The old brakes were F50's on 335mm rotors and the car did a 1:40.6 at Phillip Island which is a reasonable time, I'm seeing high 600s on the temperature paint. A guy I know ran the Endless fluid at WTAC without issues and he was doing 1:33's I think (Evo) with a 355/332 setup. I don't get out to the track as much as I'd like but we put the car on the hoist and spanner check every bolt and re-paint mark everything, bleed the brakes, change the fuel, check the coolant system and re-bleed blah blah blah before every event. Motorsport is expensive, RB's are expensive so a couple of hours before an event is time well spent. It's also a net time saving because if you can keep your RB from self destructing it saves you time in the long term!
    • Duncan
      First/Second Post

      By Duncan · Posted

      Welcome Alice......hope you have a bit more luck from here on! What was done in the build?  
    • svenskalice
      First/Second Post

      By svenskalice · Posted

      Hello! I'm new here, I have an R33 GTST that is currently being finished up! Last year was pretty rough, blew two stock turbos so I decided to build the car. Has been down since November, but I get it back next weekend!
    • svenskalice
      Kaizo Industries

      By svenskalice · Posted

      Hello, I believe my car was imported to America in the 2000s by Kaizo Industries. Would anyone be able to help me find more info on them? I've only found all the basic stuff like that paul walker bnr34, them being shutdown by feds, just stuff like that. Any help would be much appreciated, thanks!
    • believer
      HKS Vcam Step Pro Issues

      By believer · Posted

      I am using Motec M150.  I am not working on the car myself actually.  My workshop is giving all these info, they are quite reputable in the industry and are very familiar with Motec and RBs and have done a few big setups with VCam and single turbo on RBs.  In fact, they built and tuned my engine from day one.  But they are stumped with my engine at the moment and cannot work out how come the compression is so low with the VCam. They told me that they have now swapped in some Kelford cams (without the VCam) and can achieve around 130psi compression and the low end torque is better, but now the engine is doughy as.  It boosts and peaks at more than 1000rpm slower, with twin HKS GTIII RS, it doesn't get full boost until over 5000rpm. I have always thought the VCam was a bit disappointing at the low rpm. To a point I had to ride the clutch a fair bit to get up a small hill from stand still.  That was when I had a clutch.  Now changing to a 8HP, I don't have that luxury and this problem has become a major issue. I am beginning to think the VCam never work since the day it was installed.  Maybe it was just sitting at the most advanced point, that is why it went good at top end but very ordinary at the bottom.  Therefore, with the help of the Holinger 6 speed and paddle shift, as long as it was moving, it drove pretty good.
×
×
  • Create New...