Jump to content
SAU Community

So There I Was Driving An R35 Gt-r....


Recommended Posts

Yes, there I was driving an R35 GT-R all last weekend at the Oran Park V8 supertaxis, mostly around the pits, but I got 1 lap of the gp circuit.

Aaaanyway, spotted a young gent by the name of Dan, who, apparently, has something to do with this site.

So he's now had a drive too.

Nissan Australia loaned it to the Nissan Historic Race Team for a bit of solidarity, we had a few Gibson cars competing there in the GrpA/GrpC historics.

Nissan Exa turbo, Bluebird turbo, PJ DR30 Skyline, 2 x HR31 Skylines, & the #1 Winfield GT-R Godzilla.

It was a pre production Australian spec car. Red premium with the leather, Bose stereo and good tyres.

A couple of facts.

It does have launch control, but if you use it too many times, some things will no longer be covered by warranty.

It has no speed limiter.

It is really easy to drive- you could send your granny to the shops for milk in it.

It's really fast. Really!

This particular car will end up being crushed.

I already offered another red car to be crushed if I could keep this one. No dice.

This is a pic of me looking really smug

Hooks

post-755-1229055538_thumb.jpg

Edited by 31GUN
Link to comment
https://www.sau.com.au/forums/topic/248666-so-there-i-was-driving-an-r35-gt-r/
Share on other sites

Acording to Top gear UK "It does infact have a speed limiter, but the Sat nav tells the ECU that its at a race track. and simply turns the limiter off"

i thought that was race tracks in japan only? unless they put all racetracks from the world on :s

aaaaaaaaaaaand y do they have 2 crush it? ill swap em if they want?

Acording to Top gear UK "It does infact have a speed limiter, but the Sat nav tells the ECU that its at a race track. and simply turns the limiter off"

I dont think the aussie cars will have this feature - they just wont have a (180km/hr) limiter at all.

i thought that was race tracks in japan only? unless they put all racetracks from the world on :s

aaaaaaaaaaaand y do they have 2 crush it? ill swap em if they want?

Having delt with pre-production cars that get registered and sold in the past best thing to do with them is crush them, they are usually test mules for the press to drive and a full of flaws, things are put together differently and usually slapped together, parts catelogues and tech info dont recognise the VIN and makes it a pain to work on. Sad, unforunte but true

Cobb will take care of the speed limiter regardless so I don't think it really matters does it? Hey GUN31 did the guys at Nissan Aust. tell you what they thought was 'too many times' as far as using the LC was? And the parts that would not be covered if you did use it too many times? I'm assuming the tranny?

Edited by GT-R OZ
Acording to Top gear UK "It does infact have a speed limiter, but the Sat nav tells the ECU that its at a race track. and simply turns the limiter off"

That is true in Japan models. For models sold outside Japan there is no 180kmh speed limiter.

That was most certainly an Australian spec GT-R as you can tell it's the only market where popup HID washers are seen so far. Not checked if the Euro one has them too but I suspect it might.

Acording to Top gear UK "It does infact have a speed limiter, but the Sat nav tells the ECU that its at a race track. and simply turns the limiter off"

That will be an awesome trick given the Australian car doesn't even have Sat Nav!!

I think you'll find the Oz car just doesn't have a limiter....

wtf would they crush it? I mean really, with all the starving kids around the world, why do they not raffle it as a non road going car and give the proceeds to charity.

Nissan FTL

By that logic we should all be driving the cheapest car available, probably something 50 years old. And instead of posting this using my 22 inch monitor i'd be using an old CGA 12 inch.

No speed limiter according to the Nissan guy.

He even suggested putting it on a dry lake to see how fast.

As for how many launches? Don't know.

All he said was overseas they are getting bent bits and broken bits because of this.

I would hazard a guess that they have not decided how many yet, and of course the ecu records all launches.

Craig Lowndes was really interested in the car too. Came and looked at it twice. (should have offered HIM a drive)

Hooks

you are a sexxy beast hooks. and can't believe you didn't give me a drive. I was there on sunday. butthole.

still i can't be too upset i'm unpacking one out of it's container tomorrow or wednesday. :) the last one i'm importing. :)

good work mate and glad you like it.

Yes Hooks, I do owe you big time my friend... I was shaking after driving it... AWESOME car... I'm still talking about it...

Now to remember how to post pictures... and if only the skid pan was empty... I think we could have cracked 2.5 g acceleration from a rolling start... lol. (I would have been happy to spend all day trying...)

This particular car will end up being crushed.

I already offered another red car to be crushed if I could keep this one. No dice.

Don't blame Nissan!!! This is a tax office directive. Basically, the vehicles can be brought in and used for a year. After that year, they have to be destroyed, and on production of proof that the vehicle has been crushed, they get a nice tax refund on the car... Has been going on for years with lots of really nice cars going to the crusher. Aston's, Jag's etc....

The pre build and product test cars often do not have complience plates and therefore cannot be sold anyway.

In another twist, Vic Roads have also changed their rules and PT cars can now only be driven by employees of that manufacturer. They now have a Marketing Eval type rego.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok, so first round of maintenance done. I didn't get much history with the car but I know it was well looked after. That isn't enough for me though, so ...  I had to do the oil filter housing gasket. It was leaking a lot, and also as part of that I did the anti-return valve and the VANOS oil line (from HEL).  But, then I got hit with the while-ya-in-there's. Did both accessory and A/C belts, tensioners and pulley. The accessory belt that came off had a huge hole in it, like somebody hung it up with a nail. The pulley and tensioners seem ok, so I'll keep those just in case. I did water pump and pump pulley. The water pump had a small bit of play so timing was good.  I also did fan clutch. I don't know how to test the old one but between the water pump and the fan clutch the car is running a little bit cooler (not much ~2 - 3 degrees maybe) so good result. Unfortunately the thermostat and housing didn't turn up in time so I'll shelve those. I have no concerns at all on the current ones.  Then I spent what seemed like 40 days and 40 nights bleeding the air from the cooling system. She also got new air filter, fuel filter and did a Mobil 1 change with oil filter. Hilariously, not an hour after telling my wife how proud I was of myself to be going slowly and meticulously and making sure everything was torqued and nothing missing I went and started it without the oil filter in. The car complained immediately of no pressure and after only a few seconds I turned it off and discovered a shit tonne of oil on the driveway. Sigh. I've driven it since and thankfully doesn't seem to be any problems. AND THEN during the test drive a ratchet extension fell into the battery area in the boot and JAMMED right next to the positive terminal and the car body. Like, just touching it made sparks and it was jammed in there. So, almost killed the engine and then almost burned the car to a crisp. Good start. This was the rails under the splash guards. So stoked, she's straight as and super clean. No rust anywhere. There was a heap of caked dirt that I removed but otherwise looked great. All 4 jacking points are perfect.   Next I want to service the gearbox. Sometimes it's a little reluctant to shift up and I'm hoping a fluid change will sort it. I also have 4 new rear subframe bushes. They're as big as a toddler. I'm renting a tool to help put them in. I can't wait for this because its a bit crashy back there at the moment.  
    • Remember when those donkeys kept using freedom units and smashed that satellite to bits on the moon? NASA has their brain switched on and uses the metric system.
    • Don't use "gasless MIG" (FCAW) you want to use proper MIG. FCAW burns a few hundred degrees hotter than MIG will for mild steel. It is a true ball ache for sheet metal. New MIG / TIG machines even have features like "Spot Weld" as well as "Automatic" settings. Plenty of people say for DIY home hobby, the auto machines are pretty good for 95% of welding. I personally, I'm a sucker for punishment and wanting to dial it in, and be able to adjust the machine. Mainly because I used to MIG weld for a living, and being able to tweak and tune things ever so slightly was my preference. Hence when I bought my ACDC TIG, it has all the adjustments for everything and no "easy" mode. Ha ha I have stick, MIG, "gaslessMIG" and ACDC TIG at home. Out of them, if you're doing mild steel sheet metal repair, and want to do mild steel exhausts, go MIG. If you're thinking you'll want to get into doing some aluminium stuff, or stainless steel, get an ACDC TIG with HF start. If you can, get one with a foot pedal too. My MIG machine is a UniMIG, and my Stick/TIG is CigWeld. If I were buying another machine, I'd buy another CIGWeld. Lots of people having issues with UniMIG, and them not wanting to cover warranty. Everything has to go back to UNIMig themselves. CIGWeld, I've had to use their warranty on my machine for a gas leak, they have repair centres everywhere, (contracted authorised repair centres). First repair place I used were hopeless, but the second place were amazing. Warranty process itself super easy, and second repair place was telling me CigWeld actually cover in their warranty, upto an hour of techs time to help you with your machine, and going through the settings and helping teach you the machine. UniMIG keep trying to get out of replacing motherboards on 12 month old machines.   TLDR, mild steel sheet welding, buy a MIG. my vote is CigWeld for brand.
    • I guess that's what happens when someone can't convert metric to freedom units to machine something. 😛
    • I've watched some vids and the technique seems to be to butt the sheets up to one another and use MIG to spot weld and slowly fill in the spots until its eventually all sealed. No runs as you would normally do, as there's too much heat generated that way. Yeah my stick welds are terrible these days because its been so long since i've done any of it. I expect to be spending many hours practicing
×
×
  • Create New...