Aftermarket Vs Retuned Stock Ecu

[Scottie]

Hey guys just wanting peoples advice about aftermarket ecu's like apexi power f/c ect in compassion to the the retuned stock ecu for my r33 gtst. I know that the power f/c can be easily retuned by most places. But what about other ecu maufacturers like haltec, micro tech ect. I would like to know they're features and your expreances with them and what sort of power gains would i be looking at.

At the monment i am running a toshi remapped stock ecu with the following mods, running 10 pound on a stock turbo, 3inch dump pipe into 3.5 inch exhuast runing a high flow cat, a front mount thats it. which is pumping out 181 rwkw this dyno sheet was supplyed from the prevouse owner. I am waking it on the dyno myself tomorrow and i will post up the results

thanks scottie

[R.3.2.G.T.R]

have a look at Nistune if your car is supported

[Adriano]

Its not. The toshi remap can be remapped to suit more mods in the future, i wouldnt be going any other way unless you are after over about 270rwkw

[Scottie]

kewl thanks where would i find out more about the nistune and if i my car will support it

[Toshi]

181kw is too low.

I think VTC problem.

Normaly over 190kw with FMIC.(some cars over 210kw)

Please come to me.

Check for fee.

Hey guys just wanting peoples advice about aftermarket ecu's like apexi power f/c ect in compassion to the the retuned stock ecu for my r33 gtst. I know that the power f/c can be easily retuned by most places. But what about other ecu maufacturers like haltec, micro tech ect. I would like to know they're features and your expreances with them and what sort of power gains would i be looking at.

At the monment i am running a toshi remapped stock ecu with the following mods, running 10 pound on a stock turbo, 3inch dump pipe into 3.5 inch exhuast runing a high flow cat, a front mount thats it. which is pumping out 181 rwkw this dyno sheet was supplyed from the prevouse owner. I am waking it on the dyno myself tomorrow and i will post up the results

thanks scottie

[Scottie]

kewl thanks that will help me out heaps yeah well i am unsure how to check the vct operation have you got acouple of tests that i can do at work and where abouts you located

thanks scottie

[Toshi]

kewl thanks that will help me out heaps yeah well i am unsure how to check the vct operation have you got acouple of tests that i can do at work and where abouts you located

thanks scottie

Put in gear.

Accelerator on and off.(1500rpm on , 4500rpm off)

If solenoid will not make noise (click nois) its not working VCT.

Im mechanic (I have 23 years experience).

Im in north ryde.

and I have software for nission consult.