Jump to content
SAU Community

Recommended Posts

Well I decided that I had nothing better to do tonight so I took the V35 to the drags

best pass was a 14.546 @ 97.4 MPH with a .789 reaction and a 2.32 60ft time

outside temp according to the car was 31deg

I discovered that traction control sucks and = a 15 sec time

I also discovered that sequential shift works best for quick runs and that even though my red line is 6500 its happy to go to 7000 and still not hit the limiter ... :S didn’t rev it out that far again since I dont want to do any damage

I thought my car being an auto had an open diff, turns out its happy to spin both wheels

Car still managed to spin some of 1st gear with 275 35 r 19s on the back

All in all im pretty happy with a 14.5 considering the car is a comfy leather arm chair compared to my old 180sx

Car was loaded with a 3/4 full petrol tank, spare wheel, jack and all the other stuff normaly in the car

From what I can tell car is stock apart from the Nismo cat back

Link to comment
https://www.sau.com.au/forums/topic/248798-took-the-v35-to-the-drags/
Share on other sites

i think if you can have the stock Tyres with good Tyres on it you should be able to go quicker. I remember my friend about 4 years ago with a stock 350z Touring auto manage to break the 14 sec mark in Calder Dragway.

Hmm well ill keep my eyes out for a good priced pair of 17" rims to throw on the back for next time

I wouldn't have to worry about the fronts however to get any benifit just the rears right?

as for references that i took from 350z-tech:

my friend:

Lionking (auto, stock):

Four fastest runs:

- 13.816 @ 162.2kph (60' = 2.095)

- 13.850 @ 163.8kph (60' = 2.120)

- 13.867 @ 163.9kph (60' = 2.114)

- 13.914 @ 159.3kph (60' = 2.059) - fully automatic mode

Notes:

- I was getting some awesome launches. Out of 9 or 10 runs - did so many I lost track - and a couple of slips, 60-70% were near perfect launches. The auto was making this very easy compared to the manual guys. They were struggling to get traction. I just powered up with the brakes on and dumped the brake on the yellow. The traction on the start was just right for my car.

- What rpm where you launching at? Not sure exactly but it is around 2,200 - 2,500 I think.

- I was tryin to hold the gears to 7000. These were my fastest runs. It's quite tricky on the auto though because if you nip the limiter the car will "hang" there for a second or two before shifting.

- I was running 25psi cold in the tyres.

other autos:

Perth 350Z (Auto, stock):

- 14.368sec @ 156.57kph (60' = 2.287)

- 14.463sec @ 157.24kph (60' = 2.333)

Notes:

- I left it on full auto for all my runs.

as for references that i took from 350z-tech:

my friend:

Lionking (auto, stock):

Four fastest runs:

- 13.816 @ 162.2kph (60' = 2.095)

- 13.850 @ 163.8kph (60' = 2.120)

- 13.867 @ 163.9kph (60' = 2.114)

- 13.914 @ 159.3kph (60' = 2.059) - fully automatic mode

Notes:

- I was getting some awesome launches. Out of 9 or 10 runs - did so many I lost track - and a couple of slips, 60-70% were near perfect launches. The auto was making this very easy compared to the manual guys. They were struggling to get traction. I just powered up with the brakes on and dumped the brake on the yellow. The traction on the start was just right for my car.

- What rpm where you launching at? Not sure exactly but it is around 2,200 - 2,500 I think.

- I was tryin to hold the gears to 7000. These were my fastest runs. It's quite tricky on the auto though because if you nip the limiter the car will "hang" there for a second or two before shifting.

- I was running 25psi cold in the tyres.

other autos:

Perth 350Z (Auto, stock):

- 14.368sec @ 156.57kph (60' = 2.287)

- 14.463sec @ 157.24kph (60' = 2.333)

Notes:

- I left it on full auto for all my runs.

THIS IS A FANTASIC THREAD YOU GUYS!....VERY PRACTICAL AND INFORMATIVE!...

THANKYOU FOR SHARING THIS!...I've often wondered what these things can do stock!.

Cheers!

Take note that regardless 350Z sharing the same engine & gearbox with V35 Skyline, the 350Z are always quicker from the factory, as they're a tad lighter.

gotchya!!....all things considered!

So....Are there any mech/tronic differences at all b/w the 2?

So how much lighter is an auto 350z? I thought auto V35s would be around 1600kgs particularly premium models with all the extra bells and wistles

I haven't seen any spec that detailed difference in weight between manual V35 and auto V35. However, based on experiences from other cars, the auto V35 should be heavier (not lighter) and should be slower than a manual one. I believe it's either 1590kg or 1690kg.

For the average driver, auto could be faster down the quarter mile as it's only a few milliseconds of each gear shift, compared to the usual foot clutch in, hand change gear, foot clutch out action that will take longer to do. unless of course you're a seasoned drag pro with superman like reflexes, or you have a sequential dog gearbox.

gearbox are the same between V35 and 350Z I believe, that goes for both auto / tiptronic and manual (with the exception of the 350GT-8 sedan's CVT 8 speed auto that are not found in any aust-delivered Nissan - different to Murano's CVT). So more reasons not to fear buying/importing a V35 in my opinion, as suspension, engine, brakes, springs, air filter, air box, oil filter, gearbox, are interchangeable. Not to mention some electricals are quite identical, power window motors, exhaust (with extended 10cm pipe), are surprisingly can be swap between the 2 cars. They're basically built on the same chassis layout, it's just the 350Z has a bit shorter wheelbase.

L8RSXY saw your car in hot4s. looked fkn nuts. looked like u had spent some serious coin on it too $$$$$$. i was interested to see how quick it would go down the quarter you squeezed 207 kw in n/a form very impressive. i wonder would you have spent less on the engine if you had gone straight for a s/c or turbo instead of n/a mods and probably a quicker 1/4 time too? is forced induction next on the menu?

Well I decided that I had nothing better to do tonight so I took the V35 to the drags

best pass was a 14.546 @ 97.4 MPH with a .789 reaction and a 2.32 60ft time

outside temp according to the car was 31deg

I discovered that traction control sucks and = a 15 sec time

I also discovered that sequential shift works best for quick runs and that even though my red line is 6500 its happy to go to 7000 and still not hit the limiter ... :S didn't rev it out that far again since I dont want to do any damage

I thought my car being an auto had an open diff, turns out its happy to spin both wheels

Car still managed to spin some of 1st gear with 275 35 r 19s on the back

All in all im pretty happy with a 14.5 considering the car is a comfy leather arm chair compared to my old 180sx

Car was loaded with a 3/4 full petrol tank, spare wheel, jack and all the other stuff normaly in the car

From what I can tell car is stock apart from the Nismo cat back

'Hey Wanabe' I thought all V35 coupe auto's ran non LSD's, :) how did you get both hoop's to spin on a straight launch! I've done a bit of reseach on this and only the manuals are fitted with LSD's, maybe yours is fitted with a aftermarket Diff, sounds like it! Has anyone on our forum got any info on this subject, or maybe I've been given bum steer. Thanks GT350. :)

maybe because those petrol nutheads are too fanatical to admit anything other than mechanical lsd as lsd.

viscous lsd is the one usually standard.

even with open diff if both side traction are identical, both wheels will spin. only exception is if one wheel on ice or wet road and other side on dry tarmac.

Nice times mate.

ive managed a 14.3 with the open diff and 6mt, going back tomorrow night, with a cusco diff, kinetix plenum and a few other new goodies with a fresh tune, should be interesting.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It can't be some stupidly proprietary video signal coming out of it that only Nissan's can understand. Surely you can just find some generic camera to stuff in there and use hot melt glue/blu-tac/gaffer tape to hold it in place if need be?
    • Update: Tunehouse looked into the problem and identified a wiring issue between the camera unit and the connector. They managed to get it working , but did warn me at some point it will stop working again. From their perspective it is unserviceable and will need replacement. They did some research and found that the new replacement camera would be Approx $1400 supply only (their fitting cost would be $190) . They did provide the part number (28442-JL05B) and a quick google of the part number shows that these are rather expensive brand new (seemingly no longer in manufacture) for the places that still have them in stock, with the used option potentially presenting  the same issue down the track at some unknown point. They are happy for me to supply the part so that they can fit it. Decisions, decisions... I can definitely recommend Tunehouse (thankyou Vee37!). Cost for the diagnosis was as quoted  ($190) , car was ready on time and communication was top notch. Their workshop is super clean and modern, and there was plenty of car candy parked out the front on the day I went.   Would definitely go back.   
    • to fix the voltage drop issue I swapped out the old 150amp alternator which turns out is a brand known for having issues and replaced it with the black 180amp alternator beside it 
    • For anyone interested, the Way Back Machine has that Japanese website archived with pictures, etc: https://web.archive.org/web/20051023225805fw_/http://www.a31cefiro.com/air_con.htm "Simply swapping the wiring of the harness will not allow it to function properly. For the outdoor air sensor and sunlight sensor, disconnect the wiring connected to CN1-11 of the air conditioning harness from the harness and connect the sensor side wiring to earth. For the indoor air sensor, disconnect the wiring connected to CN2-3 of the air conditioning harness from the harness and connect the sensor side wiring to earth. The connector PIN numbers listed here are the genuine A31 PIN numbers. To avoid incorrect wiring, check with a tester before wiring. Also, disconnect the wiring in a location close to the sensor. The disconnected harness side wiring will not be used, so be sure to insulate it." Wish someone sold a conversion harness to just plug-and-play a Kouki 180sx digital climate control into C33/A31. I'm decent with wiring but feeling kinda lazy about taking this on. Edit: Did some more digging and found a helpful Minkara blog post about the conversion as well: https://minkara.carview.co.jp/userid/1831116/car/1360568/2284209/note.aspx "After installation is complete or the battery is replaced, you need to go into self-diagnosis mode and set the internal air recirculation. The way to do it is to "hold OFF with the key on for more than 5 seconds, set the number to 5, then press 卍→C." ↑↑↑It probably won't make sense unless you actually try it (・∀・)." Lol wtf
    • Maybe SAUNSW could see howany members would do a motorkhana day if Schofield's is still available for a reasonable price...
×
×
  • Create New...