Engine Light On After Engine Rebuild And Power Fc Install

[brembogtr]

im trying to figure out why the engine light is on the dash after i have rebuilt my motor and installed a d jetro power fc

anyone have any ideas?

[The Mafia]

if you don't have the boost control kit installed, turn it off on the hand controllers "etc" menu

The engine light will go out.

[heslo]

I'd be willing to bet that too, had the same on my car and I tracked it down to that setting also

[brembogtr]

hmm but i do have the kit installed but without the map sensor

[R31Nismoid]

If you didnt have a map sensor, it wouldnt run...

[jonn]

I'm guessing he means the map sensor for the boost control kit, not the two you need for the d-jetro itself.

[paulr33]

hello

ETC,

SENSOR SW CHECK

look for any sensor highlight in black background, that is, the name of the sensor, will have a big black box around it

this is the sensor that is out of range, out of scope, not working or faulty. you should then investigate which ever sensor is toast

ie: if you see TPS highlighted, then check the throttle body sensor

if you see PIM1 check map sensor #1

if you see WTRT check the water temp sensor

if you see BOST check the map sensor for the boost control kit, if you arent using the boost control kit, turn it off

until that sensor returns to normal voltage the engine check light will remain on