Jump to content
SAU Community

So... I Am An Idiot...

webng

By webng,
in Four Door Family & Wagoneers

 Share

Recommended Posts

iamhe77 Grand Master

iamhe77

Posted
Posted (edited)
Had a run in with a very sturdy post yesterday whilst reversing out of the car wash place. Yes it was after I washed the car and dried it. Yes I have insurance. Yes, I'm an idiot.

Just thought I'd share. :D

That'll buff right out. :D

The rest of the car in that shot looks lovely and clean though! :(

Edited by iamhe77
KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted
Had a run in with a very sturdy post yesterday whilst reversing out of the car wash place. Yes it was after I washed the car and dried it. Yes I have insurance. Yes, I'm an idiot.

Just thought I'd share. :(

Join the club. Very upsetting to see damage to your fine car and doubly upsetting when its self inflicted. Just had that very repair to my car...new guard and painting $700. If you can find a guard the right colour you could possibly do it yourself.
webng Experienced

webng

Posted
  • Author
Posted (edited)

Thanks fellas. I'm so pissed off as it's just bad timing with xmas/new year coming. I think I'd be better off paying my $500 excess and getting it all fixed schmick. Front guard alone is about $300-$350 from the wreckers. Hopefully they'll be able to repair the Dayz front bar, wouldn't want to think how much that would be new! Just when you think it won't happen to you...

Edited by webng
GTS4WD Grand Master

GTS4WD

Posted
Posted

hahaha.. dude.. dont stress.

We all f*ck up! Anyone who sais they haven't reversed into anything/accidentally hit something silly is lieing!

Its all part of being human.. We all make mistakes.

Best of lick with the repairs! :(

Tangles Grand Master

Tangles

Posted
Posted

yeah, I parked the old N15 Pulsar hatch in a tight spot, got parked around, and to get out had to scrape against the side of a wall.

ended up pushing the passenger rear door skin right in, ppl pointing and laughing at me - bastards

excess was $800 back then for me, so ended up doing a $200 cashy back yard job and got it reskinned and painted

good luck mate, but backluck at same time

hurts doesnt it

webng Experienced

webng

Posted
  • Author
Posted
R34 front end conversion time!!! :)

haha! I wish!

...Best of lick with the repairs! :)

Thanks mate.

...good luck mate, but backluck at same time

hurts doesnt it

Yup... it sure does... I couldn't even bare to photograph it till this morning.

Thanks to you for putting this thread up...

It becomes a learning experience for all of us.

that's very zen... no probs.

66yostagea Grand Master

66yostagea

Posted
Posted

Dont worry Nick, Mrs66 backed into a concrete water tank at the local Servo. She was worried cause she thought the Stagea iis my pride and joy. I assured her that she is, then went down the back yard and cried. $2500 and I supplied the new bumper. LOL LOL LOL. NOT.

webng Experienced

webng

Posted
  • Author
Posted
Dont worry Nick, Mrs66 backed into a concrete water tank at the local Servo. She was worried cause she thought the Stagea iis my pride and joy. I assured her that she is, then went down the back yard and cried. $2500 and I supplied the new bumper. LOL LOL LOL. NOT.

jeez...

... this is what my mrs said "i'm sorry honey, but i'm so glad it wasn't me that did it!"

pixel8r Mentor

pixel8r

Posted
Posted

I'm hearing ya buddy!!

Picture this...

I flew from Adelaide to the Gold Coast to pick up my previous stagea (s2) over 2.5 years ago. Everything went smooth, we paid for the car etc. then drove to brisbane and stayed at my parent's place that night - they live in brisbane - then we drove back to adelaide the next morning. Anyway, a family friend who lives in Dubbo wanted us to drop by on the way and show him the new car. So we did, and as I was backing out of there I somehow managed to back into the gate and put a scrape right down the rear quarter panel. It did polish out weeks later but yeah less than 2 days after we picked up the car and I put a major scratch on it.

BigDirtyJase Experienced

BigDirtyJase

Posted
Posted

you're an idiot....lol j/k (sorry I had to do it your topic heading said so)

in all seriousness, don't strees mate...everyone has done it before...I had my dad back into my old car reversing out of the driveway...he didn't even tell me that he hit my car...I only found out when my brother called me and let me know...my dad blamed me because I parked my car in on a slight angle (it's only because he reverses using the mirrors only...no head check)

For sure you'll find a front guard and wish you all the best in the repairs...it will come out good as new

webng Experienced

webng

Posted
  • Author
Posted
you're an idiot....lol j/k (sorry I had to do it your topic heading said so)

Yes! Yes I am! :)

in all seriousness, don't strees mate...everyone has done it before...I had my dad back into my old car reversing out of the driveway...he didn't even tell me that he hit my car...I only found out when my brother called me and let me know...my dad blamed me because I parked my car in on a slight angle (it's only because he reverses using the mirrors only...no head check)

For sure you'll find a front guard and wish you all the best in the repairs...it will come out good as new

Thanks buddy. I reckon they'll be able to fix the front bar, so might be just front guard replacement.

webng Experienced

webng

Posted
  • Author
Posted
hi nick,

just saw the mrs driving your car..... adam sent me the photo you sent him yesterday morning when i was at work and at first i thought it was his car.

OUCH!

Hope it goes ok!

Thanks man, hopefully get it fixed soon.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Haggerty
      RB25DE NEO with Haltech ECU

      By Haggerty · Posted

      Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • MBS206
      Cas issue

      By MBS206 · Posted

      It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • nash47
      Cas issue

      By nash47 · Posted

      Yes sir am asking is there possible way from aem tuner from wiring pins 
    • MBS206
      Cas issue

      By MBS206 · Posted

      Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...