Jump to content
SAU Community

Recommended Posts

Anyone using one of these ?? Any experiences ?? Comments thoughts ?

garrett%20500-600hp%20roller%20turbo1.jpggarrett%20500-600hp%20roller%20turbo1.jpg

Specs:

Garrett GT3040 Ball Bearing Turbo:-

Aftermarket Applications

Part Number #GSB8005A for 500hp

#GSB8006 for 600hp

Rated 500-600hp

Spec's:-

0.63 0r 0.82 /r Turbine Housing (4 bolt outlet)

0.70a/r Compressor Housing

Watercooler Centre

56 Trim Compressor Wheel (T04S)

55 lbs/min Comp Flow Max.

84 Trim Turbine Wheel

External Wastegate

$2500 new from GCG - Save $460 as it is on special now.

Seems like a good buy. But how good is the turbosharger ??

Considering the XTRGTST-STG2 500hp rated is $2450.00 - and that is on an exchange basis.

I understand that a bit of fabrication might be neccessary to fit the GT3040 to an R33 GTS-T ??

Thanks in advance.

Link to comment
https://www.sau.com.au/forums/topic/24896-gt3040/
Share on other sites

Tony,

I think Andrew has the HKS 3040 - this one is a Garret GT3040 - buggered if I know what the difference is.

CGC say that these are either 500-600HP Turbo - but I think Merli's had more potential than that.

If they are similar, then I think may this one would be too laggy for an RB25 - But perfect for the RB30.

Needjapcar - looks sweet mate - yeah keep us informed !@

Link to comment
https://www.sau.com.au/forums/topic/24896-gt3040/#findComment-528984
Share on other sites

Originally posted by T0nyGTSt

If you have the AR's you might be able to match it to the HKS 3040 AR's.

It'll give you an idea of spoolability.

T.

You cannot match the HSK ARs, as HKS has proprietry on them.

I am pretty sure Ben Ellis is using a Gt3040 on his GTT in HPI mag but with a 1.** turbine AR, also I think GTSt VSPEC just fitted one.

The hks 3040 uses 50 trim comp wheel, the 56 wheel is used on the 3037 by HKS? the turbine trim is the same.

HKS sell the 0.87 A/R turbine housing with the 3037 as a kit for the RB25, I currently have the 0.61 and although it makes good power at 1-1.2bar, I am sure it is going to choke the engine a bit up top once I start winding in boost, also it is only making 256 at 1bar, so probably a bit more with a larger AR on the turbine, which I intend doing soon:)

I think your choice boils down to where you want the boost and how much power you. The bigger the AR ratio the better the top end, more ign, more power for the same boost pressure - due to the reduced back pressure (the curse of turbo powered engine) but also more lag, although this can be offsett by the use of adj cam gears or cams.

Also if you intend doing cams you will get increased overlap, so a smaller AR could really cause troubles.

Link to comment
https://www.sau.com.au/forums/topic/24896-gt3040/#findComment-529052
Share on other sites

Hi guys, that's the one, a Garrett based XTR GT3040, it's going on our RB31DET. If you are thinking of puting it on an RB25, you need to make sure you have the support systems to handle it. Camshafts (256's at least) are a prequisite, as are larger injectors, exhaust manifold, good wastegate, exhaust, intercooler etc etc. All that will make the cost of the turbo seem like a bargain.

PS; for the guys thinking about aftermarket plenums, Ben's car made the 290 rwkw and the 11.9 (I only saw the 12.4) with a standard RB25DET plenum.

Link to comment
https://www.sau.com.au/forums/topic/24896-gt3040/#findComment-529307
Share on other sites

man i gotta subscribe to hpi, hate hearing about this in it i haven't seen!!!

anyway, i was thinking of this turbo too! didn't see the special on it though!!! this special takes almost $400 bucks off, should bring the turbo setup down to just over $4K!!

wish i had the money :D plus the $3K+ for support systems!!!

plus upgraded pistons for over 250 rwkw?????

expensive to be sure!!

any ideas on the power difference between using this turbo on RB25, and the RB30/25 setup? sydneykid?

Link to comment
https://www.sau.com.au/forums/topic/24896-gt3040/#findComment-530253
Share on other sites

I'll have all the supports - including new (forged) internals, cams, etc - But still running the GCG Hi Flow turbo (500HP).

Thinking of upgrading to another turbo that flows better - But not sure if I can justify the cost right now - Maybe later.....

This GT3040 seems like good value.. I'll give GCG a call !

Link to comment
https://www.sau.com.au/forums/topic/24896-gt3040/#findComment-530454
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Yeah the issue here is that we have a lot of topics, unless we matched on the exact word & phrase we'd get a million topics and the one you want will not likely be in the top 20 or so.
    • Yeah great idea, I have already added R32 Wiring Diagram but we can add as many as we want. 100% ! This has been something I've wanted to do for a while. I thought we could have a way for people to 'suggest' a link be added to the library when they come across something good.  We could kick this along by allowing members (maybe a subset) to tag threads they find to allow us to more easily find/locate/use good content, ie a tag 'for-library' which can then be added to the library and maybe have the tags reviewed and updated to better match the content. This would make it easier then to find the content when not using the library. We can also create pages that have lists of content with specific tags. That would allow us to add a tag and then have it automatically added to a page. We could have a page just for the 'for-library' content that we could then moderate and put wherever.  This excites me, the lack of structure with the amount of content is a little overwhelming.
    • Of course you can. That was a waste. Straight down one oil drain gallery and out the sump hole. Could at least have run the engine a little (obviously with at least minimum oil level on the stick).
    • Oh really? Maybe I'm being silly. I'll get some more shots. I had it higher but found that it went too high after a drive, I never knew this but exhausts can move around a bit when hot (makes sense, just never knew) and when it was higher it would make nice cooking plastic smells. That said, I could put some heat tape on a'la 90's R33 exhausts     Ha, I've spent a lot of my life in castle hill waiting for cars to be done. I think I'd prefer something closer but thanks D. 
    • @Duncan Yes, changed filter every time. I don't have the service manual for the car yet (Car was imported and they removed everything when importing). I've been using the oil change threads in the forum as reference.   @Milkmun The second oil change was after ~4 months after the first months and I wasn't sure about reusing engine oil that was opened. The third oil change happened within 3 weeks of the second oil change and I used the previous leftover oil to just "clean up" the system. (Poured it through while the sump plug was open")
×
×
  • Create New...