Jump to content
SAU Community

Recommended Posts

Yeah well, all of us think Sumo is a dick.... even the people who gave him the job think hes a dick.

They can tune just about anything except for F-Con i think due to the software being in japanese. I think in terms of what they reccomend customers buy... in general its Motec that gets the nod (or more recently a remap via BiKiRoM). But if youve already got the ecu then they'll quite happily help out :P

Red17

Originally posted by red17

Yeah well, all of us think Sumo is a dick.... even the people who gave him the job think hes a dick.  

They can tune just about anything except for F-Con i think due to the software being in japanese. I think in terms of what they reccomend customers buy... in general its Motec that gets the nod (or more recently a remap via BiKiRoM). But if youve already got the ecu then they'll quite happily help out :P

Red17

Heh heh, I didnt want to mention names :)

If they think SUMO is a dick why is he still employed there ... I have spoken to various people and workshops and they always crap on how good they are and the other guys shit .. never got anythink nice to say

Originally posted by red17

Yeah well, all of us think Sumo is a dick.... even the people who gave him the job think hes a dick.  

who are you?

Brett: I think Speedworks don't do Apexi PFC's because they were told by JUN themselves not to - apparently they can't get the proper tuning required without the stuff that apexi loan out, and the h/c isn't good enough. Whereas that datalogit fc stuff apparently works REALLY well, and can tune to temperature (which apparently Apexi PFC's + H/C can't..? Could be wrong on that one though)

Its sad the APA dyno is at Rover tech because we were going to buy a 4wd dyno last year but organized with Ivan to hire his for our 4wd work but theirs no way im going to put up with Dave so i'm going to need to spend the extra cash on upgradeing to a Dyno Dynamics 4wd Dyno soon.

I love it when I hear utter shit like this. JUN says touch your toes.... JUN says pat your head and rub your tummy.... JUN says bend over and.....

Pffffft what crap....... so JUN say DO NAWT TARCH COMPETITION... WILL BREAK YOUR MOWTA.... DONT NAWT TARCH OR WE NO GIVE YOU GOOD PRICE ON JUN COMPONANT...

Pffffffffft

JK

Originally posted by PSIKO

who are you?

Brett: I think Speedworks don't do Apexi PFC's because they were told by JUN themselves not to - apparently they can't get the proper tuning required without the stuff that apexi loan out, and the h/c isn't good enough.  Whereas that datalogit fc stuff apparently works REALLY well, and can tune to temperature (which apparently Apexi PFC's + H/C can't..? Could be wrong on that one though)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So now doing the change and first time dealing with rb so little nervous giving engine power and potential for screwing it up When you align all marks and then remove crank bolt, timing move little I assume you can put the bolt back in once you have removed the pully to get timing to where you want?   here is pic of my both intake and exchust cam aligned, depending on angle you look they seem to be either aligned or a half tooth or so out. Any thoughts? Should you angle your face and look at each mark that way as if looking straight rather than from above as it can be misleading   <a href="https://ibb.co/ZpnhcvbF"><img src="https://i.ibb.co/HfWrGR9b/IMG-4447.jpg" alt="IMG-4447" border="0"></a> <a href="https://ibb.co/4wm2wn4q"><img src="https://i.ibb.co/JWBqWwr1/IMG-4445.jpg" alt="IMG-4445" border="0"></a>   https://ibb.co/ZpnhcvbF https://ibb.co/4wm2wn4q
    • Thanks for the reply @GTSBoy Haven't really thought of that yet, but you are right. If the hose was damaged it should be absolutely pissing by now. I'll put some heat sleeve around it for good measure since I'm already removing the line anyway.  Maybe I'll put on some of the stock hardlines if I ever fully remove the turbos again. Maybe when T51R modding the compressor housings? Might be a fun mod on GT28s for that "fake single turbo" effect.
    • Update 1: I did some work on the car already before finalizing this post and my "issues" list. I dropped the Tomei exhaust in favor of the HKS Hi Power Silent. Sounds nice and I can actually hear myself think now. Also gives me a realistic chance to legally drive without silencer inserts. A bit of cheating was necessary to still be able to mount the Top Secret style diffuser. Some malusage of washers and a bit of "convincing" toward the brackets and exhaust hanger seemed to do the trick. The shaky steering wheel has been resolved as various suspension components were worn, like sway bar bushings and link bars. Most notably the two steering tie rod ends. Had some trouble finding bushings because my sway bars are not OEM thickness, 23.x up front and 27 rear. But non adjustable, so no aftermarket I suppose. Maybe they are nismo units? Turbo oil drain hoses were definitely still the originals and are new now. Wasn't the cause of the turbo oil leak sadly. Currently removing the rear turbo because of it, I suspect the braided oil feed line is the culprit. This issue needs to be dealt with so I can work towards actually getting the turbo setup legal and inspected. Two new issues to add to the list as well. Rear Main seal is probably leaking. Time will show how bad it is, I don't really want to drop the gearbox right now just for the stupid seal. Could fix a few other things in one go once I do that. Front right driveshaft grease is going past the cv boot, so at some point I'll fix that too.
    • Ok so no 4cyl clutch... Yeah it is a factory manual. So if iam correct i need clutch and flywheel too? I can use something that suits something like R32 GTST?   EDIT: https://www.ebay.com/itm/224291042776 Is this ok?   EDIT2: i maybe forget to mention this(dk how important it is) but the trans will be behind RB25DET NEO(iam doing swap) It will be there for a little while. Iam planing to do bigbox or BMW tranny..
    • You're probably right about that one. Thanks for your suggestions, I hope I don't need a new 3rd brake light. Although wiring issues might arguably be worse. Right now I'm in the midst of a turbo removal because of my oil leak, other problems are going to have to wait for now.
×
×
  • Create New...