Jump to content
SAU Community

Recommended Posts

hi guys,

I want to get a new wheel and set up a little cockpit for my PS3. Now I was all set to buy a logitech G25 when someone showed me a fantech porsche 911 turbo wheel. they are both pretty good, both around the same money and both have very similar features.

check out the G25 here: http://www.hardware.info/en-US/articles/am...wheel__Review/1

and the fantech 911 wheel here: http://www.techpowerup.com/reviews/Fanatec...911_Turbo_Wheel

Now, to my eyes the porsche wheel is a little more classy. BUT the logitech has metal pedals over the 911s platic ones. BUT the porsche wheel is wireless. BUT the wireless may give some lag?

they both have nice leather wheels

they both have 6 speed shifters or sequential shifters

the logitech also has nice paddles (911 does not)

the 911 is wireless (logitech is not)

the 911 wheel looks a little nicer

they both can position the gear shift either left or right side

the logitech has the metal peddles

the 911 comes with free 1gb porsche usb stick

they will both work with my PS3.

they both cost about the same.

so guys, it's doing my head in. Which one should I get? any thoughts or experiences greatly appreciated. :)

also, any recommendation on where to get a cheap cockpit frame would be much appreciated. I just need the basic frame. I have race seat and side mounts. just need something to mount the seat, pedals and wheel.

lol, yeah the 1gb flash disk wont get the porsche over the line!

but it does have a nicer wheel, apparently better force feedback motors (3 instead of 2 and some fancy stuff to make it smooth), and it's wireless (still not sure if that's a positive or negative, probably a positive).

I think you may be right though, the logitech may be the better overall buy.

lol, yeah the 1gb flash disk wont get the porsche over the line!

but it does have a nicer wheel, apparently better force feedback motors (3 instead of 2 and some fancy stuff to make it smooth), and it's wireless (still not sure if that's a positive or negative, probably a positive).

I think you may be right though, the logitech may be the better overall buy.

yeah, well wireless is nice and all, neat etc... "the way of the future" if you will, but i suppose you cant really go wrong with a cord, unless you cut it... :)

and no doubt a wired one will have slightly better response than wireless

well apparently the porsche wheel is a nicer looking wheel than the G25, and being an exact replica of a 911 turbo wheel is pretty cool too.

man this is a tough call. why can't I have the 911 wheel, with the G25 pedals and completely removable shifter, and have it with wireless and a cord option.

I grabbed a G25 a while back, love it. Simple truth is that paddle shift is easier, smoother and faster than stick shift when you're tearing around a track in a group of cars. The G25 atleast has the option of both. Online Gran Turismo ftw!

good point about the paddles. you're right, when racing the paddles are easier to use since you don't have to take your hands off the wheel. hmm, that's one more point for the G25.

yeah but all those wires really sh!t me... had a wheel on my old Xbox that had a power cable, cable connection to the console and a cable between the wheel and peddles... you would get all tangled and forget sharing turns with a mate, it would take half an hour to get setup every time...

however you may be able to tuck all the cords away nicely if your using a cockpit... but still wireless FTW

... and its got Porsche written on it... can't go wrong lol

Hello BeerBaron

I might want to add a few things to your list of what the Porsche wheel has:

  • The Porsche wheel does have paddle shifters (similar to the DFP)
  • Powerful and very smooth belt drive (This feature alone costs more than any metal parts used on the other wheel)
  • LED display which shows telemetry data or to adjust settings during gameplay
  • adjustable FF strentgth and steering angle on the wheel (drive GT5 with 360° or 180°)
  • Bigger wheel rim (300 mm)
  • More buttons on the wheel
  • Illuminated buttons with different symbols depending on what system you are playing
  • Completely different mechanics on each pedal and not just different springs. The clutch has a declining resistance.
  • 5 m power supply cable
  • 2 separate gear sticks and the 6+1 shifter with a stronger haptic feedback

Bye

Thomas

I've used the G25 at a mates with a reclinable leather BMW seat cockpit setup on GT5 Prologue and its very good. He made it all up himself pretty cheap. I will be doing a similar setup for mine soon enough. Personally I think you can't go wrong either way you go if you can get them for a similar price. But if I had to choose i'd go the G25. USB sticks are worth peanuts so I wouldn't let that infuence you either.

Out of interest how much are the prices you have seen for these? There's a huge variance in prices around. Umart have been the cheapest I have seen so far (for the G25)

Hello BeerBaron

I might want to add a few things to your list of what the Porsche wheel has:

  • The Porsche wheel does have paddle shifters (similar to the DFP)
  • Powerful and very smooth belt drive (This feature alone costs more than any metal parts used on the other wheel)
  • LED display which shows telemetry data or to adjust settings during gameplay
  • adjustable FF strentgth and steering angle on the wheel (drive GT5 with 360° or 180°)
  • Bigger wheel rim (300 mm)
  • More buttons on the wheel
  • Illuminated buttons with different symbols depending on what system you are playing
  • Completely different mechanics on each pedal and not just different springs. The clutch has a declining resistance.
  • 5 m power supply cable
  • 2 separate gear sticks and the 6+1 shifter with a stronger haptic feedback

Bye

Thomas

thanks thomas. ;) your post does help. the belt drive is important as is a larger wheel and the clutch pedal feel. the other things less so, but thanks for pointing them out anyway.

now, how about a sponsorship deal? :) can't hurt to ask, and I promise I'll tell anyone I talk to how great it is. :P

I've used the G25 at a mates with a reclinable leather BMW seat cockpit setup on GT5 Prologue and its very good. He made it all up himself pretty cheap. I will be doing a similar setup for mine soon enough. Personally I think you can't go wrong either way you go if you can get them for a similar price. But if I had to choose i'd go the G25. USB sticks are worth peanuts so I wouldn't let that infuence you either.

Out of interest how much are the prices you have seen for these? There's a huge variance in prices around. Umart have been the cheapest I have seen so far (for the G25)

yeah, the USB stick doesn't come into it. :P mainly just care about which one I'll be happiest using.

price wise around $250-$300 on ebay for either one. which is pretty good. I think they both retail around $500AUD which isn't too rich either considering how much better these two are than any other offerings out there (short of a couple grand for a pro type one).

Hello BeerBaron

I might want to add a few things to your list of what the Porsche wheel has:

  • The Porsche wheel does have paddle shifters (similar to the DFP)
  • Powerful and very smooth belt drive (This feature alone costs more than any metal parts used on the other wheel)
  • LED display which shows telemetry data or to adjust settings during gameplay
  • adjustable FF strentgth and steering angle on the wheel (drive GT5 with 360° or 180°)
  • Bigger wheel rim (300 mm)
  • More buttons on the wheel
  • Illuminated buttons with different symbols depending on what system you are playing
  • Completely different mechanics on each pedal and not just different springs. The clutch has a declining resistance.
  • 5 m power supply cable
  • 2 separate gear sticks and the 6+1 shifter with a stronger haptic feedback

Bye

Thomas

Fanatec themselves responded to your question! I dont see Logitech doing the same :P

Makes you wonder who else views these forums haha

thanks thomas. :D your post does help. the belt drive is important as is a larger wheel and the clutch pedal feel. the other things less so, but thanks for pointing them out anyway.

now, how about a sponsorship deal? :rofl: can't hurt to ask, and I promise I'll tell anyone I talk to how great it is. :P

You can register in the 911 wheel club and make the test registration but even if we give you a discount it will be very expensive as we ship it from Germany and not from our Australian distributor.

And we never requested any favour to become selected as a tester as this would question the quality of all reviews made by testers. In fact we appreciate critisizm and use them to improve our products. All new wheels are developed this way.

my previous message has been edited without prior notice and I was not able to edit it again.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hows your intake piping? Are you still running stock? Having in the stock AFM position would mean, if the BOV was shut/venting out, it'd create the almost stalling kind of effect right // "the rich pulse behaviour" due to MAF thinking air is flowing ? But this would be better than having the bov in the stock position + MAF on/just before cross over piping right?
    • Essentially, yes. Although I wouldn't put the AFM on the crossover pipe. I'd want to put it into what amounts to the correct size tube, which is more easily done in the intercooler pipework. I bought a mount tube for card stile AFM that replaces the stock AFM - although being a cheap AliExpress knockoff, it had not flange and I had to make and weld my own. But it is the same length and diameter as the stock RB AFM, goes on my airbox, etc etc. I don't have a sick enough rig to warrant anything different, and the swap will take 5 minutes (when I finally get around to it and the injectors & the dyno tune).
    • So to summarise, the best thing to do is to move recirc to between turbo and IC, and maf on the crossover pipe. Meaning I'd need a recirc flange, drill a hole in the piping on turbo outlet area. And drill hole on crossover to fit/weld maf sensor? Either that or put the MAF on the turbo inlet right?  Is an aftermarket recirc/blowoff valve recommended? Do currently have family in Japan so could probably bring something back with maybe a cheeky lil SuperAutobacs run?
    • Yep, so far most have said that it looks like corrosion on the wall from piston not moving. Which then has probably damaged the oil rings and caused those vertical marks. The longest the engine was still after the rebuild, was the winter of 2018 - 2019, plus the boat trip to Japan. When I shipped the car, it had normal gas in the tank but before that winter pause, it had E85 in tank.  In any case, even if either one of those was the cause, it happened close to 6 years ago and the car has been driven something like 30 000kms after the fact. Again, apart from the plugs and the dip stick, there is nothing in the way the car runs that would indicate what has been going on in the engine. I am going to consult a shop and ask their opinion, what would be the best approach. I do have some access to a garage I could use to diagnose further myself, but time is very restrictive. Might end up buying another engine that could be used while this one is being remedied. Without pulling the head, it will be impossible to find out if it needs another bore, but here's to hoping a hone would suffice.  Goddamnit, I would really have preferred this not happening.  
    • Boot is going to be replaced eventually. I just wire brushed what I could and rust converted. Then painted in rust kill primer. the spoiler also got repainted and plugs replaced on the ends. The under side of the bonnet is going to be black also, currently white. But red on the top side, same colour code as the silo to begin.
×
×
  • Create New...