Jump to content
SAU Community

Recommended Posts

A bloke told me that there is a different level of complaince if you import a car yourself to if an importer imports one and that i wouldn't be able to register a car thats been imported privatly?

or once its complied thats it? the car im talking about is already registered in a different state

sorry if i missed this in the search

Link to comment
https://www.sau.com.au/forums/topic/249153-different-levels-of-compliance/
Share on other sites

the Bloke must have been talking about a persoanl import these cars are owned by someone more than 12months overseas and are allowed in under the personal import Scheme not RAWS so the only go thru an Engineers certification and mod plated to be allowed to register this differs for all states . this would mean if you moved interstate it may need to be rechecked and signed off by an engineer from that state.

In the Case your question is asking if you are a private person importing or a dealer imports a vehicle unders the Raws system they are all complied axactly to a national standard set by raws and would be able to register in any state.

So really you need to find out if the car was a personal import or a Raws complied car. for your own information Personal imports have a yellow type Id plaque stating the vin and personal import. for old Raws complied cars they are green ID plate and in the last time raws went crazy they changed it to purple colour with all details of raws compliance workshops name and Vin # etc ..

ask the seller for a photo of the import plate it should clearly state what type of import it is.

Hope this helps

Regards, Phil

Ahh that makes sense now thanks mate! im pretty sure he didn't own it for 12 months over there he just imported it, i'll get a photo of the import plate but i can see a purple plate in the engine bay pic i have, can't read any numbers though

thanks for your help

edit so it doesnt matter what the numbers are on the purple plate as long as its purple? see attached link for pic

http://img246.imageshack.us/img246/9347/dscengineax1.jpg

Edited by byebye

to be honest I would ring the relevant office in your state and state your case.

I own a personal import that I bought from interstate and for me (qld) it was a case of going to QT and registering it.

You don't need SEVS compliance, that personal import compliance plate is a federal scheme, so it's already qualified to be in the country.

Here in VIC, you'd need an engineer's certificate, I think NSW is the same. SA you just take it to regency I believe.

Anyways, like Chris said, check with your local state road agency to find out what you need to register a personal import (yellow plate).

cheers,

David @ Carizma

So i would have to get it complied to change states
  • 1 month later...

In relation to imports, I had a look at this site:

http://www.tradecarview.com/used_car/japan...?ps=25&so=2,

It provides a shipping estimator and Freight courier. I looked at the Skylines, Wrx and Evo's which are resonably priced.

I have no experience in this field and would like to know how much hoops do i have to jump to get this vehicle on the road in NSW ie RTA. Would i need engineers certificates or what ever cerificates ??????.

Some nice Imports in Japan, what are your thoughts.

Do a search on tradecarview and you'll find out what the general consensus is >_<

Aside from just being a place were dealers list their cars it is also were lazy arse people cut and paste images from and state it is some ones stock that supplies to them but half the time it is just some cheap piece of shit sitting in a dealers yard somewhere in Japan.

what are the requirements for xenon headlights and front windscreen replacement in regards to compliance?

i looked at a car from a backyard dealer who couldn't speak English very well and i'm sure he said that he doesn't bother removing the xenons or replacing the windscreen (although he said he was meant to) for compliance.

any help appreciated.

The headlights are supposed to be modified to accept H1 globes.

Windshield is usual part no. M1G4 for the 34 coupes, there could be others that pass the ADR as well, haven't seen the evidence recently.

Both headlights and windscreen have to be roadworthy as well of course, which is where you're more likely to run into problems rather than with the compliance of them.

David @ Carizma

what are the requirements for xenon headlights and front windscreen replacement in regards to compliance?

i looked at a car from a backyard dealer who couldn't speak English very well and i'm sure he said that he doesn't bother removing the xenons or replacing the windscreen (although he said he was meant to) for compliance.

any help appreciated.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You've just discovered a really good reason to tell yourself, yes, I do need to buy an aftermarket ECU. Put the MAF in the bin. Slap in the new ECU and have a think about what turbo sounds you prefer.  Do you want a 90's style BOV wooosh? Do you want a hektik tsututututu?  Mate, can't go wrong. Just gotta get that ECU and the world is your oyster. 
    • Hi. Iam just curisou about this topic. I saw this video. It is about Greddy Type FV2. I know that BoVs are about that sound but how and when to use it? I read some topic here and from what i have understand on stock RB with MAF there will be some "problems" if you use this BoV? It vents the air in to the atmosphere and the MAF on stock car needs this air back in to the intake and not out? Or is it wrong? If so...i saw you can put some adaptor to circule air back...but does that not "loose" that sound? I saw another BoV from Turbosmart and it has two "exhaust" like ports? One is for the stock tubing for letting air back and one is for "sound" and let the air in the atmosphere? Can someone please explain? This is the Greddy one:  And this is the Turbosmart.     THANK YOU!! EDIT: So i read about this topic some more and i if i understand that correctly: That Greddy can function either like BoV or 100% Bypass valve? And that Turbosmart is what they called hybrid so you can adjust what and how many air can be vented out or back in? Is this right? THX!
    • That dirty voltage drop is the culprit I suspect 
    • i cant get them all in 1 screenshot unfortunately as i just dont know how to move things around tbh, but they are all from the same log and the line crosses at the same point for all of them
    • It's about time I start work on my sun tan. So I knocked up a few parts that will all combine together to become my new power steering reservoir. Now just to produce an abundance of UV and IR rays while melting a heap of bits of alu to become one... Well, that's after I put one more hole in it for the return line to plumb to. It likely won't be this weekend, as Sunday I'm meant to be in doing some last minute stuff to the AMG race car, and the weekend after will be filled with non my Skyline stuff, followed by Bathurst 6 hour. So I don't expect to get to melt metal for at least 3 weeks.   I also managed to stuff up and start cutting the hole for the res to pump pipe on the wrong side of the line... It means instead of the lines being nice and tight against the inner guard, they'll be out off the guard.    The size of it means I should end up with about 1.8L of power steering fluid, and still have space for another half a litre before it reaches the overflow/breather. This is wayyyyyyy more capacity than factory, which should help keep Powersteer oil temps lower, and the design hopefully allows it to prevent any aerated oil being able to makes its way down to the bottom as it'll have a couple of baffles and some hopeful trickery to force air bubbles away from the bottom.
×
×
  • Create New...