Guilt-toy Installs Vipec V44 Plug In.. & Base Tuned

[SECURITY]

so where do i connect the wires of the MAC valve to? which one goes to the black and white wires of the stock wiring? does it matter?

[TiTAN]

If you have an ECU pinout for the stock ecu check to see if the boost control solenoid is triggered on pin 25.

[BoostedBarge]

Yes, you can use the wiring for the stock boost solenoid. Mine has been wired up with spade connectors straight into the stock boost solenoid plug

You will need to change the way the tubes to the mac valve are set up, though.

[SECURITY]

well ive only got to choose from 1 black and 1 white wire to connect the wires from the MAC valve (which both wires are black). i dont know which one to connect to which. the wiring diagram only had the colours that come from the ecu which are LG and L/W.

and i still dont know which wires from the mac valve are + and -

[SECURITY]

just spoke to Scott from Insight Motorsports again and he said that it doesnt matter which wires they get connected to.

[BoostedBarge]

I just went and had a look at mine for you. Both wires on the Mac valve are black, but it looks like one has writing on it. I also saw '---', so I guess that one is the negative. The stock BC connector is a rectangle shape with the connectors in a T sort of layout. The connector that is at one end of the rectangle connector is the negative. The one that runs down the centre of the 'rectangle' is the positive. I hope that makes sense.

[Guilt-Toy]

lol.. its a solinoid.. there is no + or -

[SECURITY]

lol

[BoostedBarge]

OK, well there ya go then. That would explain why the wires are both black

[Guilt-Toy]

OK, well there ya go then. That would explain why the wires are both black

yeah it confused me at first.. just like injectors.. they don't have + or -

you learn something every day .. dunno what i have learnt yet though

[Swiper the Fox]

yeah it confused me at first.. just injectors.. they don't have + or -

you learn something every day .. dunno what i have learnt yet though

Yes you have...

That DiRT is a tightass and wont spend coin on a wideband

[Guilt-Toy]

Yes you have...

That DiRT is a tightass and wont spend coin on a wideband

If i am tuning it then you are going to have to have a wideband sensor. Simple.

[TiTAN]

Anthony, get him to pull the one out of your car, then he can put it back when your done?

[Guilt-Toy]

Anthony, get him to pull the one out of your car, then he can put it back when your done?

No.

I win. he purchased one I want to setup Open Loop correction on his car.. big $$ engine would be good to have some insurance when he is at power cruise

[TiTAN]

i suppose it also gives you the ability to throw some extra fuel into it quickly and easily during hot weather.

[DRD-00F]

I come in here, and all I read is DiRT pulling something in and out of Guilt toys rear end... I'm crushed

[TiTAN]

his o2 sensor is more in the front half than the rear end doof

Anthony would you mind PM'ing me with a basic run down of setting up antilag and cyclic idle. Did the fuel map need to be changed at all?

Edited February 4, 2009 by TiTAN

[DRD-00F]

good thing I don't tune my own car then...

either way... the heart-break is still there...

[Guilt-Toy]

good thing I don't tune my own car then...

either way... the heart-break is still there...

hey ive tuned your car!!.. Twice! Stop your whinging!

& No can do Titan.. you got stock turbo.. i am guessing it would break on your first anti lag.

[DRD-00F]

I know you have, and it's still alive!

It would be in skyline heaven if I tuned it