Jump to content
SAU Community

Air Con Re-gas?


Tyson 1990
 Share

Recommended Posts

Reminds me when I went to get a regass done years ago and to my suprise the car hadn't been "converted" for the new gas during compliance (dodgy)

The guy basically told me "conversion" was a parts scam to get more money out of suckers....er customers as they may as well change the older system for newer parts while doing the job to get paid more. He changed over the gas fittings to reflect the new standard (pink and blue), filled it up with R134a and sent me on my way for $50.

He said it was a load of lies about the compressors/condensers etc etc not coping, he was bloody right that cars A/C didn't skip a beat and was better than many a converted import I have been in....was icy during summer.

Link to comment
Share on other sites

depends on what the problem is... if it was good and now it's doing nothing, it could be a leak....

if you're car is running an older refrigerant you will probably get a nicer system if you run it on R134a as its a lower temp refrigerant... but if there is a problem in the system it with show it's head pretty soon as it runs a higher head pressure...

you're best bet is to get your system checked out...

Link to comment
Share on other sites

i would suggest going to some 1 that does aircon and get them to use a dye when they gas it up, as how ever the gas leaks out u get a uv light and check it over and you can then pinpoint what is wrong

the gas can last up to a few seconds or weeks months or years.. depends on your leak and whats wrong with your a\c system, and get it quick as gas prices have rised about 5 times in the last 6 months

average price on a general public regas is about 150ish includ dye

r134a is a lower boiling boint at -26 but has alot more high pressure compared to r12

if u got r12 the fittings on your ac would be a screw top if its still cold keep it AS LONG AS POSSIBLE

r134a are clip on

o and in a few more years there releasing a new gas

Edited by red_screamer
Link to comment
Share on other sites

Ok thanks, i'll get it checked out. I don't know what these numbers and letters mean that everyone is mentioning lol. It just blows relatively warm air, just feels like its normal temperature air thats coming out.

Link to comment
Share on other sites

As part of compliance imports are meant to get de-gassed by a professional who users some ghostbuster shit to take the gas out without any entering the atmosphere

So that’s probably why its not cold…

Red devil radiators/cooling are a proper company with stores around bris that do a regas and if it leaks the dye will show where from and they can fix it up easy. I think they charge around $150

Link to comment
Share on other sites

from the old ac system it was called r12 stopped maken it in 1996 and was completely banned in 2000, now u gotta retofit by law to the new r134a gas,

at our work we offer a test gas and dye, as your only ganna put it in to leak out so no point fully gassing it charge about $60-75 or something, alot of importers know what your a\c system would be like before they degassed them...

Link to comment
Share on other sites

  • 3 years later...

The price of gas has gone through the roof. From the beginning of the year to now it has increased by just over $200 from about 3 months ago and just over $600 from the beginning of the year.You can thank the government for this. Gone are the days where we could just regas and send you on your way. Everybody has to be licenced to handle it and buy/sell it. We get audited by ARC when ever they feel like it and check out our gas records to make sure we are follow there rules and regulations. The gas companies supply it keep putting the price up every couple of weeks, so my suppliers tell me. I've had to increase my regas price from $185 to $220 just recently. I offer an inspection for $50 which includes a written quote. If your a/c isn't cold anymore the gas has definitly leak out it doesn't just get used up. Regasing is only wasting money that could be spent fixing the problem.

Just a warning for everyone out there, if you hear of anyone using a gas named HYCHILL, STAY AWAY FROM IT. There have been reports of it down south exploding on repairers and a few container ships have had some containers blow up due to this gas being used. It's pretty much like LPG and smells like it. It is banned for use in Queensland, but some companies sell it.

Link to comment
Share on other sites

Petrol explodes and so does LPG. Should we stay away from those in cars as well? Is it a danger to manifold?

With the mentality you have, I would. I'll explain it in simple terms for you then. The gas is drier then R134a and other a/c gases, friction creates heat, then bang.

Link to comment
Share on other sites

brad,

have you played with HR31s at all. I am not sure what is wrong with mine (no gauges and no gas licence) but the compressor fires and fan blows. suspect a leak but unsure where. car has 134 fix already.

do you have time sat at all to have a squiz?

Link to comment
Share on other sites

brad,

have you played with HR31s at all. I am not sure what is wrong with mine (no gauges and no gas licence) but the compressor fires and fan blows. suspect a leak but unsure where. car has 134 fix already.

do you have time sat at all to have a squiz?

If the compressor is kicking in then the gas pressure should be there as when the system is empty the pressure switch will stop the electric clutch from operating. Does the low pressure (large tube) side of the A/C feel cold to touch. If so I'd be looking for a problem on the linkage that controls the air flow in the back of the unit inside the car. The one on my R32 broke so wasn't redirecting the fan flow through the A/C core.

Link to comment
Share on other sites

  • 2 weeks later...

Hey bud, sorry man just saw your post, been flat out lately. No problems at all, would be happy to check it out for if you haven't fixed it yet. Call my mob 0407 166 639. Tried sending you a PM but wouldn't let me.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • They should do. I have S14 (or something S chassis, anyway) driveshafts in my R32 (because my diff flanges have 3x2). They're the right length. When you go looking for R32/3/4 driveshafts (for turbos), they're all the same thing, so are the same length. So there really shouldn't be any reason why those cheapies from JJ won't also fit an R34. R32/3 NA should also be the same thing. The (3x the price) D-Max ones are uni-fit. They have 5x1 and 3x2 bolt holes and say they cover all the cars. So that would also suggest that they are all the same except for the flanges. And in that case, the flange goes both ways. I'd be buying the D-Max ones if I ever have to replace a shaft. Because that will open up diff options without needing to juggle shafts also. Juggling shafts is gay.
    • Yeah with the adaptors they do look like the photo above - just the fitment within the plenum itself and then further with the rail to the intake is questionable - we shall see tomorrow hopefully once I get some replies from Aeroflow, maybe those bosses are the missing piece....
    • Should be fine, if you have it sitting too far in, you end up just spraying the walls and have shit idle. You "can" run them like that, however I don't think it's a great idea (also depends on your plenum, might be good to just get the injector bosses first, mock it up and see if you need to get the bottom extension) Ideally your injectors, with the extension should look like this  (Not my photos, just Google)
    • Thanks for the replies guys, it's really appreciated.  It seems the kit was supposed to come with those injector bosses but hasn't. Unsure if they'll help as even with the adaptors to make them a 3/4 height injector they still sit too far out so mount the fuel rail?
    • Hello, I am looking to replace my two rear drive shafts in my R34 N/A Skyline but I'm finding conflicting information. Do S13/S14/S15 or R32 NA/ R33 NA fit? https://justjap.com/products/gsp-premium-rear-drive-shaft-l-h-nissan-silvia-s13-s14-s15-3x2-type?currency=AUD&srsltid=AfmBOoqY7EwDaYCUoUU3mxxZ_qrUXkVVHiV4MIN7ozoar6scjnEiekv- would this fit?
×
×
  • Create New...