Jump to content
SAU Community

R32 Gtr White With Mods

Sinful

By Sinful,
in For Sale (Private Whole cars only)

 Share

Recommended Posts

Sinful Grand Master

Sinful

Posted
Posted

I have made the decision to sell off my R32 GTR

The car does not get used much anymore and the rego is just running out without being used. With another dedicated racecar nearing completion it will be used even less next year.

The base car is a 90 model R32 GTR Originaly gunmetal grey.

Engine mods

Engine was rebuilt 2,500Km's ago.

New R33 crank shaft

- Standard bearing sizes

- Fully balanced with clutch and harmonic balancer fitted

- Grub screwed oil galleries

- Modified oil galleries (specific details available to purchaser)

Original 05u block

- Was cleaned, sonic tested, tunnel aligned and honed.

- Internal modifications to assist oil return to sump (specifics available again)

- Enlarged oil return galleries from head to sump

- Oil restrictor fitted

- Modified coolant passages

Factory R33 N1 rods

- Were from an unstarted crate engine

- Fitted with new ARP rod studs and nuts.

Factory N1 pistons

- Were all equally weighed (specific weights to purchaser)

- Fitted with new rings

- From same engine as the rods

Original Head

- Cleaned, decked valves cut and guides replaced

- New stem seals and all spring seat pressures set

- After market Graphite head gasket

- JJR adjustable cam gears and Clear cover

- Mild port work was done to the head when it was apart, nothing major but some casting irreglarities were cleaned up and was flow benched to ensure everything was even and equal.

Turbos are believed to be steel wheel direct replacements

Has an intank 040 pump fitted

Basicaly the engine was blueprinted and assembled, so squish heights etc were all checked, and machined to acheive tolerances required. Its using the same clearances as our race engines but without the exotic pistons/rods/crank etc.

The builder is more than happy to put purchasers in contact with the machinist who did all the pre assembly work to verify exactly whats in it and how it was built.

2x 3/4 inch custom made front pipes (formerly made for the race car)

90mm exhaust from cat back

Extreme heavy duty button clutch

Nismo Slave cylinder

Transfer case was repaired/overhauled 1000Km's ago

Blitz ID3 boost controller

Custom oil catch can system

Suspension- Apexi shocks and Eibach Springs

- Nismo lower rear control arms

- Nismo upper rear control arms

- Nismo Front castor rods

- Cusco upper front camber arms

- Replaced sway bar bushes and links

Its currently set-up with spring rates to suit semi slicks and does handle very nicely on the track.

The body was resprayed last year in a brilliant white. Inside and out paint job done by exclusive colours. Has a N1 rear boot lip and bonnet lip fitted.

Paint work is still immaculate

Comes with Enkei 17 by 9.5 inch rims with decent tires.

Brakes - Callipers were all overhauled with new genuine nissan seals at the beginning of 2008.

- DBA 4000 series slotted front rotors

- Unknown slotted rear rotors

- Bendix ultimate rear pads

- TRW lucas front pads

- Master cylinder recently had new seals fitted as well (mid 2008)

The interior is all in great condition but the seats have the usual bolstering wear on them.

Car recently competed in the NSW dutton rally and held its own very well without missing a beat.

Its completed in club level super sprint championship in 2008 as well as many a track days.

With a good driver it has achieved - wakefield park 1.08.20

- oran park south 49.45

- oran park GP 1.20.10

All of which were done on average Advan A048 tires.

I'm asking $20,000 for it and not open to any form of trade.

May be negotiable if it's going to a good home.

Located in Sydney

Contact 0404 832 620 After 5:30pm weekdays

Here are a few photos of it, I can provide interior and engine bay photos if serious interest is had as the car is currently in storage.

post-8051-1229597160_thumb.jpg

post-8051-1229597122_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/249424-r32-gtr-white-with-mods/
Share on other sites
Sinful Grand Master

Sinful

Posted
  • Author
Posted

It has a Apexi Power Fc

On road has never been over 1bar boost and about 280kws at the wheels

Eibach springs I can run different combos but currently it has 8 fronts and 6.5 at rears.

If you want anymore info or photos give me a call :banana:

Contact Jess or Brad 0404 832 620 After 5:30pm

R32 obsessed Rookie

R32 obsessed

Posted
Posted
I have made the decision to sell off my R32 GTR

The car does not get used much anymore and the rego is just running out without being used. With another dedicated racecar nearing completion it will be used even less next year.

The base car is a 90 model R32 GTR Originaly gunmetal grey.

Engine mods

Engine was rebuilt 2,500Km's ago.

New R33 crank shaft

- Standard bearing sizes

- Fully balanced with clutch and harmonic balancer fitted

- Grub screwed oil galleries

- Modified oil galleries (specific details available to purchaser)

Original 05u block

- Was cleaned, sonic tested, tunnel aligned and honed.

- Internal modifications to assist oil return to sump (specifics available again)

- Enlarged oil return galleries from head to sump

- Oil restrictor fitted

- Modified coolant passages

Factory R33 N1 rods

- Were from an unstarted crate engine

- Fitted with new ARP rod studs and nuts.

Factory N1 pistons

- Were all equally weighed (specific weights to purchaser)

- Fitted with new rings

- From same engine as the rods

Original Head

- Cleaned, decked valves cut and guides replaced

- New stem seals and all spring seat pressures set

- After market Graphite head gasket

- JJR adjustable cam gears and Clear cover

- Mild port work was done to the head when it was apart, nothing major but some casting irreglarities were cleaned up and was flow benched to ensure everything was even and equal.

Turbos are believed to be steel wheel direct replacements

Has an intank 040 pump fitted

Basicaly the engine was blueprinted and assembled, so squish heights etc were all checked, and machined to acheive tolerances required. Its using the same clearances as our race engines but without the exotic pistons/rods/crank etc.

The builder is more than happy to put purchasers in contact with the machinist who did all the pre assembly work to verify exactly whats in it and how it was built.

2x 3/4 inch custom made front pipes (formerly made for the race car)

90mm exhaust from cat back

Extreme heavy duty button clutch

Nismo Slave cylinder

Transfer case was repaired/overhauled 1000Km's ago

Blitz ID3 boost controller

Custom oil catch can system

Suspension- Apexi shocks and Eibach Springs

- Nismo lower rear control arms

- Nismo upper rear control arms

- Nismo Front castor rods

- Cusco upper front camber arms

- Replaced sway bar bushes and links

Its currently set-up with spring rates to suit semi slicks and does handle very nicely on the track.

The body was resprayed last year in a brilliant white. Inside and out paint job done by exclusive colours. Has a N1 rear boot lip and bonnet lip fitted.

Paint work is still immaculate

Comes with Enkei 17 by 9.5 inch rims with decent tires.

Brakes - Callipers were all overhauled with new genuine nissan seals at the beginning of 2008.

- DBA 4000 series slotted front rotors

- Unknown slotted rear rotors

- Bendix ultimate rear pads

- TRW lucas front pads

- Master cylinder recently had new seals fitted as well (mid 2008)

The interior is all in great condition but the seats have the usual bolstering wear on them.

Car recently competed in the NSW dutton rally and held its own very well without missing a beat.

Its completed in club level super sprint championship in 2008 as well as many a track days.

With a good driver it has achieved - wakefield park 1.08.20

- oran park south 49.45

- oran park GP 1.20.10

All of which were done on average Advan A048 tires.

I'm asking $20,000 for it and not open to any form of trade.

May be negotiable if it's going to a good home.

Located in Sydney

Contact 0404 832 620 After 5:30pm weekdays

Here are a few photos of it, I can provide interior and engine bay photos if serious interest is had as the car is currently in storage.

post-8051-1229597160_thumb.jpg

post-8051-1229597122_thumb.jpg

Hi how are you? I saw this Gtr the other night and i sent you a text message the other day but i got no reply... I am wondering is this car still for sale? Could u send some pics of the interior if possible to [email protected]

Thanks :)

Sinful Grand Master

Sinful

Posted
  • Author
Posted
Hi how are you? I saw this Gtr the other night and i sent you a text message the other day but i got no reply... I am wondering is this car still for sale? Could u send some pics of the interior if possible to [email protected]

Thanks :D

Sorry I dont have any pictures of the interior currently and the car is in storage.

Only interested in serious buyers if your genuine buyer wouldn't you prefer to organise an inspection?

Sinful Grand Master

Sinful

Posted
  • Author
Posted
If i had the cash i would buy it off you right now Jess.

Good luck with the sale. Thinks about selling the 34!!!

Aww and I would sell it to you cause I know it would be going to a good home!!

Cheers..I think you need a change like me :cool:

R32 obsessed Rookie

R32 obsessed

Posted
Posted
Sorry I dont have any pictures of the interior currently and the car is in storage.

Only interested in serious buyers if your genuine buyer wouldn't you prefer to organise an inspection?

Oh ok thats cool i am genuinely interested in the car and would love to see the car its just i work 6 days a week and its hard for me to get a bit of time to myself hence why i asked if u had any interior pictures...

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kyer32
      Want to buy a Rb20det preferably in Sydney

      By Kyer32 · Posted

      Hey guys I’m chasing a Rb20det complete or bare block need a good running engine as mine has low comp 
    • GTSBoy
      HY51 Fuga Hybrid

      By GTSBoy · Posted

      You're making my point for me. 95 is not "premium". It is a "slightly higher octane" version of the basic 91 product. The premium product that they want people to buy (for all the venal corporate reasons of making more profit, and all the possibly specious reasons of it being a "better" fuel with nicer additive packages) is the 98 octane stuff. 95 is the classic middle child. No-one wants it. No-one cares about it. It is just there, occupying a space in the product hierarchy.
    • sonicii
      HY51 Fuga Hybrid

      By sonicii · Posted

      98 and 95 have to meet the same national fuel standards beside the actual RON.  91 has lower standards (which are quite poor really), so 95 is certainly not 91 with some octane booster. It would be an easier argument to claim 98 is just 95 with some octane boosters. Also RON doesn't specify 'quality' in any sense, only the octane number.  Anything different retailers decide or not decide to add to their 95 or 98 is arbitrary and not defined by the RON figure.
    • silviaz
      Shitty Series 1 R34 Interior Plastic Paint

      By silviaz · Posted

      Anyone know alternatives to powerplus tungsten? Can't find an alternative online. 
    • GTSBoy
      HY51 Fuga Hybrid

      By GTSBoy · Posted

      95 is just a scam outright. 98 is the real "premium" with all the best detergents and other additive packages, and at least historically, used to be more dense also. 95 is just 91 bargain basement shit with a little extra octane rating. Of course, there's 91 and there's 91 also. I always (back in the 90s early 2000s) refused to put fuel in from supermarket related fuel chains on the basis that it was nasty half arsed shit imported from Indonesia. Nowadays, I suspect that there is little difference between the nasty half-arsed shit brought in by the "bargain" chains and the nasty half-arsed shit brought in by the big brands, given that most of it is coming from the same SEAsian refineries. Anyway - if there's still anything to that logic, then it would apply to 95 also. 98 is only made in decent refineries and, as I said, is usually the "premium" fuel, both in terms of octane rating and "use this because it's good for your engine because it's got the unicorn jizz in it!".
×
×
  • Create New...