Jump to content
SAU Community

10.61 1/4 Mile. First Day At Track !

95GTR600

By 95GTR600,
in Engines & Forced Induction

 Share

Recommended Posts

95GTR600 Collaborator

95GTR600

Posted
Posted

Thanks guys for all the information on the forum. ( I used a lot the SEARCH button)

I am very happy with the performance of our GTR R33. First day at the 1/4 mile track we run 4 passes 11.4, 11.0, 10.82 and 10.61

We run with SUNOCO Race Fuels GT PLus 104 octane unleaded.

The car is a single turbo power FC +600whp tunned by Cristian Penson @

C-WORKS shop sponsored by Zero Wheels and omegaxenon.com

And after the first visit to the track it become the fastest Nissan in Dominican Republic.

We look foward for better times on 2009. :banana:

Link to comment
Share on other sites
R31Nismoid Grand Master

R31Nismoid

Posted
Posted

440rwkw will throw you deeper mate, keep the R&D going with that power as there is still faster ET's to be had!

Great work!

What turbo/tyres outta interest?

Im guessing GT35 if your running 104, a a T04Z should do that on 98 (whever the equiv is over there)

Link to comment
Share on other sites
95GTR600 Collaborator

95GTR600

Posted
  • Author
Posted (edited)
440rwkw will throw you deeper mate, keep the R&D going with that power as there is still faster ET's to be had!

Great work!

What turbo/tyres outta interest?

Im guessing GT35 if your running 104, a a T04Z should do that on 98 (whever the equiv is over there)

The car makes 600whp on a 4 wheel dyno.

Borg Warner S300 series single turbo conversion.

4 slicks tires 26"

Edited by 95GTR600
Link to comment
Share on other sites
95GTR600 Collaborator

95GTR600

Posted
  • Author
Posted
what are your 60ft time on slicks?

440rwkw has seen very low 10s on semi's, not full slicks...

Get that 60ft down (which is where i expect your loosing the time) and see a 9 without a doubt on slicks

first 1.59

best 1.50

Link to comment
Share on other sites
Strik3r Experienced

Strik3r

Posted
Posted

There is an easy gain if you can grab second before you hit limiter.. sounds like it bounced of it at least 2 times.. thats gotta be worth .1 of a second. Keep up the good work! Out of curiosity, whats your response like with that turbo compared to say, a Garret t04z which is in the same power range.

Link to comment
Share on other sites
95GTR600 Collaborator

95GTR600

Posted
  • Author
Posted (edited)
There is an easy gain if you can grab second before you hit limiter.. sounds like it bounced of it at least 2 times.. thats gotta be worth .1 of a second. Keep up the good work! Out of curiosity, whats your response like with that turbo compared to say, a Garret t04z which is in the same power range.

You are right, it was my first time running a RHD car... but I agree with you about hit limiter.

I love the Borg Wagner turbo...a friend has one Honda producing 800whp @ 36 lbs of boost.

We got full boost at 5,200rpms.

We will try to make things better next time.

Edited by 95GTR600
Link to comment
Share on other sites
95GTR600 Collaborator

95GTR600

Posted
  • Author
Posted
what are your 60ft time on slicks?

440rwkw has seen very low 10s on semi's, not full slicks...

Get that 60ft down (which is where i expect your loosing the time) and see a 9 without a doubt on slicks

What should be a decent 0-60 ft ?

Do you think factory rear differential will hold the power ?

Link to comment
Share on other sites
  • 2 weeks later...
95GTR600 Collaborator

95GTR600

Posted
  • Author
Posted (edited)
Nice work, is it S362 or bigger? Going by that dyno power and trap speed I am guessing it was tuned on a hub dyno or something?

it's a S372 with a S400 label. I did not understand well about it. But I am very happy with the turbo and the whole car.

We look foward for better times when the track is open again.

Does anyone knows what we have to do in order to make 1.3x on 0-60f with slicks ? Which way to do a good burn out without damage the case, etc. ?

Edited by 95GTR600
Link to comment
Share on other sites
Lithium Grand Master

Lithium

Posted
Posted
it's a S372 with a S400 label. I did not understand well about it. But I am very happy with the turbo and the whole car.

We look foward for better times when the track is open again

Damn mate thats a big turbo you have there, and pretty good spool for a turbo of that size too - probably got more in it :D

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Stivo
      R32 goes out in right curves

      By Stivo · Posted

      That's true. However, this problem has started since the tuning. First time with the return journey from the tuning. But yes, the pipe was clogged with dirt and rust. That was certainly due to age
    • Dose Pipe Sutututu
      CD009 RB Conversion

      By Dose Pipe Sutututu · Posted

      Great info @tidi0x  Will definitely be handy for others and maybe me if I decide to keep the shit box H pattern.
    • tidi0x
      CD009 RB Conversion

      By tidi0x · Posted

      Bumping this up one last time.... I wanted to follow up on the clutch slave issue. I realized that what the issue comes down to is the pocket is flat milled, and the cylinder does not want rest flat. So in order to mount it correctly you will need to make a spacer for the fingers so the cylinder is floating. I took two plates of aluminum, drilled some holes and was good. I did still need to make the relief cuts in the bell housing, as even with the spacer the bleed section still interferes. The OE bell housing the mounting holes are raised from the housing.       
    • robbo_rb180
      R32 Gtst - Track Car

      By robbo_rb180 · Posted

      If the event in USA goes ahead will be interesting as it seems the rules will get more cars over here. Apparently the track is laguna seca too. Yeah s15, if I get a the lower dash trims, centre console and change front cross member to standard LCA position will fit clubsprint. See how rules are as i would rather do complete widebody than a bolt on flare to run the 295 with proper clearance.
    • 180 wanabe
      370gt Stock Suspension

      By 180 wanabe · Posted

      If the car is legal height I can't see it being an issue. Found a thread on reddit that might offer some insight.   I got a ticket from a copper in QLD for my S15 being too low. They had this wheel thing on a stick that they put under the car and it hit my exhaust. Anyhow went to an exhaust shop to get the exhaust tucked up/hung a little higher and I wound the coilovers up a smidge. Don't think I even had to go back to the police station unlike when I got defected for having a carbon bonnet when I brought the S15 from the ACT to QLD and had to replace it and then rock up at a police station and have a yougish female officer who knew nothing about cars confirm that I had changed bonnets. Should have just painted the carbon bonnet yellow to match the rest of the car lol
×
×
  • Create New...