Jump to content
SAU Community

Recommended Posts

Thanks. Have sent them an enquiry.

Edit:

Damn that was a quick response from modyourcar!

Was told you need a Haltech ECU for this dash.

Bummer!

If that's true (doubt it) then it applies only to the haltech version, but check out the racepak forums for ecu compatibility (adaptor modules etc). And search around for the cheapest place to buy them - normally direct from the US is best, but Intune in WA were selling them incredibly cheap (950 for display only) when a friend checked towards the start of the year.

Edited by DCIEVE

You don't need a Haltech ECU for the IQ3s.

Racepak sell modules that translate between most aftermarket ECUs and the dash.

So they have modules for Motec, Autronic, AEM, Big Stuff, OEM Corvette ECUs, DFI, Haltech, MEFI, Pectel, FAST, XFI and some sort of generic CAN interface. Doesn't look like they do one for PowerFC at the moment. Worth speaking to them though because they are very pro-active if they see a marketing opportunity.

There are also two versions of the dash. A full logging version and another that just displays things. The one linked in this thread on modyourcar is the display only version. Either versions can be hooked up to any ECU that has an interface. Or you can run them without any ECU interface at all. Just don't have as much to display or log.

There is a guy called Mike Runge here in Australia who is stocking them. I'll try and pull his email off of my laptop if I can get it to work after running it over this afternoon with the Evo :( Bizarrely enough whilst pulling out the Autronic interface from my IQ3 setup to lend to a fellow IQ3 user whose interface had died and is entered in Targa West next weekend.

Edited by BCM
Sounds good. So on top of the dash you just needed the interface module so it works with the ecu (I have an sm4 as well), and the usm module for additional inputs (oil/water temp, oil pressure etc).

Correct. System works like shown below. Excuse crap paint pic.

620335559_HFkgr-L.jpg

Edited by BCM
  • 5 months later...

Hi guys - am wanting to revive an old thread so as to enquire who has purchased one of the Racepak IQ3 logger dash units and if so, from where. I have only started exploring this avenue of modification so am hoping to get some good pointers as to where to start looking and who has provided good/bad experiences in the buying/selling process.

I am wanting to purchase and install the IQ3 dash, Autronic SM4 interface and USM 4 channel interface unit for my 4G63 powered Lancer Coupe.

Any assistance would be greatly appreciated.

Edited by ENGINR

i've got a haltech/racepak dash. waiting to put it in the car atm. the racetek site has a price list which is pretty good.

$375 USD for the Autronic modual

$1395 USD for the logger dash

$175 USD for UMD

$1945 USD total

or

$2242AUD + postage.

i'm not not sure if the Haltech vnet module will work with the Autronic, i don't see why it wouldn't, as they both run the CAN interface, but might as well contact a Haltech dealer and find out, cause i think they are slitly cheaper from Haltech ATM.

Edited by sav man

I was looking at the states, was quoted $200 USD for postage though. My local tuner is a Haltech distorbuter, so I got it through him.

A few tuning companies are onselling the IQ3 now, i know Tomie are selling them (at a 11ty% price hike)

We have one in our project car now. We got ours directly from Haltech.

Here is the link to a few pictures of it installed: http://www.skylinesaustralia.com/forums/Ps...og-t242907.html

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • All I can say Duncan is good luck and I hope that Neil did not run any E85 in Cheryl. I have recently experienced the full spectrum of fuel tank issues in my R33's that had been caused by E85 and contaminated fuel. When you take the cover off the top of the tank and have a look inside you will get an understanding of how easy it will be. Best case situation is clean fuel with minimal contamination. My GTR was like this and it was a very simple operation to just grab the fuel pump carrier bracket and slide it up and out of the tank. My three GTS_T's had different levels of fuel contamination that was probably caused by E85 in the fuel.  In the worst case all of the metal components in the tank had rusted to the point where there were pieces of rusted metal swirling around in the tank. This required the removal of the exhaust, the tailshaft, the complete rear cradle and the fuel tank. The components in the tank were that rusted that it took days to get the fuel pump carrier and the mounting brackets out of the tank. When the tank was finally cleaned, everything inside the tank had to be replaced. With the tank all back together I could then reinstall it in the car along with everything else that had to come out. Good luck and I hope that you find a clean tank.    
    • It is a two door. It is black and also still has the OEM wheels and stereo. Exact model would be KR_R32RGFEL_SS According to GTR-Registry.com is a 2 Door Coupe; RB20DE; 2WD no HICAS; MT.F5; (11L) Projector Headlamps and Fog Lights; (12_) Electronic Active Full Auto Air Con (Climate Control); (13-14SS) V Selection -- Which seems to be accurate description of my variant. Will try to upload a few pictures soon. The OEM wheels look like the below image. Image is taken from the goo-net-exchange website.  
    • Time: Saturday 18th January - 9am -10:30am Where:  Cafe By Lamanna 10 English St, Essendon Fields VIC 3041  - https://g.co/kgs/mhVKvAB Registration: So we can give the cafe a heads up on rough booking numbers please rsvp below Registration Link: https://forms.gle/wPtfj9Gp8bvCiouo8
    • Welcome Gabriel. At least your car has a glorious RB and not the shitty CA18. As MBS206 mentioned all the good bits can be added later. Two doors or four?
    • And half of them have been converted to turbos.
×
×
  • Create New...