Jump to content
SAU Community

Recommended Posts

just wondering if anyine knows if theres a differance ( apart from age ) between the stock r32 gtr turbos and the r34gtr turbos

reason being im considering wether it is worthwhile to change my 32 turbos for a newer 34 turbos as im worried mine might go anytime.

im not after huge power but would like to safely boost at about 15-16psi

thought it might be a cheaper option than upgrading to -7's

cheers

Link to comment
https://www.sau.com.au/forums/topic/249675-quick-question-re-stock-turbos/
Share on other sites

If I were going to the trouble of putting turbos on a GTR - personally I wouldnt be putting ceramic turbos back on it. Sure - the R34 ones are newer and ball bearing - and people argue that the will last longer at higher boost levels. Ultimately though - that ceramic turbine is prone to failure.

To the best of my knowledge - the R34 units run a smaller compressor wheel too. They may be a good replacement if your turbos go bang and you manage to source a set cheap. If it were me - I would at least be puting something with a steel turbine on it though...

http://homepage.ntlworld.com/tbroom/Turbos.htm

my 2c :worship:

just wondering if anyine knows if theres a differance ( apart from age ) between the stock r32 gtr turbos and the r34gtr turbos

reason being im considering wether it is worthwhile to change my 32 turbos for a newer 34 turbos as im worried mine might go anytime.

im not after huge power but would like to safely boost at about 15-16psi

thought it might be a cheaper option than upgrading to -7's

cheers

Edited by Antimatter

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The cam I am actually putting in (a few posts up) is actually smaller than my current one. At least duration/overlap wise. All the chop stuff I hear just sounds like an engine running badly, because it is. I then envision driving it around in 1st gear and being massively sad about it bucking to the beat of said chop. There is an idle video of someone with a similar cam floating around the internet, but mine is a custom cam (so is his) so it'll never be the same, plus the fact exhausts are entirely different. What I want to do is put some bullet mufflers/race mufflers in to replace a couple sections straight pipes that currently replace the two extra cats that I don't need. But this is even further down the line!
    • I can tell you now, when the bracket that the little hydraulic ram attaches to snaps, with a subframe, and V8 from an AMG C63 on it, it sounds like someone letting shotgun off right beside you. It leaves your ears ringing, and a huge thankfulness that you never ever put a body part under something heavy that's only supported by a hydraulic lift...
    • Still not a guarantee fix. I used a high quality butyl-mastiq (the black goo that's not really silicone nor polyurethane, same stuff they use from the factory that just spreads out like melty cheese), and I still get lots of water on both sides of the trunk when raining or washing the car. I also suspect the factory spoiler rubber gasket might not be sealing well, so I'm thinking of adding a thin layer of grey silicone around the bolt holes on both sides and see if that's where it also leaks from. The biggest issue is that these cars don't come with a drain hole on each side like other coupes and hatchbacks.
    • I hate it, but maybe he could paint it Monster jam style and call it...godzilla?
    • Would seem to me to be appropriate to go GTR style bar. There are options with and without N1 vent holes, with the GTR lower lip integral (because FG copy). https://justjap.com/search?q=r32 bumper  
×
×
  • Create New...