Jump to content
SAU Community

Recommended Posts

in that socket 1155 they make i5 and i7 to suit

also the i7 has 2mb more cache and 100mhz faster i have just done a simple OC and im pushing 4ghz on the 1333 sniper ram more than enough to play BF3 once they polish the game more i should get a few more frames

ati cards always have driver / game issues, which is why I avoid and don't reccomend them to people (apart for use in HTPC or other non gaming).

TBH if you're sticking with 7200rpm drives in a new build you should damn well make sure that you're buying the fastest one with the most cache etc you can afford. Got me stumped how people are willing to lash out on processors etc but leave their drives as the bottleneck! (unless your budget really is that tight)

EDIT: furthermore to this, we are starting to exclusively rollout Vertex 2 spec SSDs in the next batches of workstations we are getting at work because it's become THAT much of a bottleneck.

Edited by bozodos

Hmmm i have run ATi since my 9800pro i danced with the devil for 4days while owning a 6800gtx but it didn't perform as good as the top ATi back then if i recall was the x800xt pe i ended up with a x850xt pe 1gb and was very happy i have always been happy with the cards games and anything i throw it it

i don't really OC my gfx cards or my systems by much

had a lot of bad times with my 4830 all driver related, did overclock the shit out of it in the end though hahaha.

Catalyst always seems to break shit; we run ATi in our Dell Optiplex fleet due to there being a lack of a Nvidia option, and the only issues we have are again drivers. Kinda fanboyish I know, but I've never had a problem with compatability from owning a TNT2 onwards with Nvidia cards.

yeah i had a TNT2 that was great i hod the old pci version when AGP just came out used to play sof2 with it and get all of 20fps

i keep my drivers updated too

and i don't always buy games when they're at there peak price

i may preorder bf3 however

So I'm going to get a i7 2600k along with a Z68 mobo of some kind just wondering what is a good aftermarket cooler for it?

I currently have a Zalman for my Q6600, seem to work fine.

Also what is currently the best bang for buck SSD out? Looking at the $250 - $350 mark. Only need 60Gb or so as it is only to be a OS drive. I'm getting a 600GB raptor for my games & all my old HDDs will carry over as storage drives.

My current gen 1 SSD is starting to die I think (randomly windows will freeze up & upon reboot, windows disk checker will pick up & fix some random corrupted files on the main OS drive).

SNIP

mobo: gigabyte Gigabyte GA-Z68MA-D2H-B3 $139 (you will want to know how many slots you want to use if using dual gfx you may loose the other pcie slot)

CPU: i7 2600 $285

Snip

i5 2500k will be more than enough for your intended purpose

I wouldnt bother with a locked 2600, an overclocked 2500k will surpass it with ease, as well as being about $75 cheaper.

With the money you save you can also get yourself a decent CPU cooler, or spend more on a GFX card :)

4.2ghz here with a 2500k and stock cooler :)

Main benefit of i7 is multiple threads per core but they don't really come into play with games (yet)

i am currently running 4.3ghz stock cooler and have read people getting 4.6ghz on a Coolmaster 212+ heatsink and fan combo

i can get 8.9sec in super pi 1.6 and just idling i get about 40deg and about 70 on 100% load

would be interested to see your superPI score so clean

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Cheapest option, find a NEO head. Put in good springs, decent cams, and send it to the moon. I rev mine to 8600RPM, gets me about 232km/h down the main straight at SMSP bouncing off the limiter in 4th. I've never dared to grab 5th 🥲
    • Gday mate, Personally in my car i run 450kw in an s2 rb25 so also hydraulic lifters and have always run it to 7500 RPM and using some baby 256 poncams with new but stock springs and retainers. While i cant speak on any experience with solid lifters i personally have had no issues with my hydraulic lifters which were just cleaned and set in an oil bath before assembly over 7 years ago. Over 8k RPM is cool IMO and if you are using the stock gearbox or just a box with longer ratios the higher rpm certainly could aid to maintain boost into the next gear as that was always something i struggled with as i have a 3582r also but a hypergear equivalent could aid that issue. In summary i would make a choice on the cam you want to use first then decide which springs and retainers work best with it and then you can toss up if you really need the solid lifters, if the car is mainly street i would learn towards keeping the hydraulic lifters as when installed properly and nothing too hektik going on around them they do the trick.  
    • Yucky. Things haven't gotten any better though. Now you have Emerson and Honeywell pushing these massive DCS/Scada things with proprietary hardware. They're not a PLC, they're not a computer, they're a...distibuted PLCish/DCSish monster of thing, that only they can program because they make the barriers to entry for anyone else so fricking high. And their developers are all located in the third/developing world (and India, in case anyone does not include that place in that category) and there are terrible failings of the ESl variety, of the care and common sense variety, and f**king forget about Functional Safety. Not a one of them has any idea what it means to comply with an IEC 615xx series standard.
    • All of the ECU grounds are to the chassis, the IGN grounds are to the cylinder head and i believe all the OEM body harness are left in original locations, im trying to work out if i can tell if the sensor voltage itself is losing any power to it from the very low ECU voltage. But yeah a manual pressure gauge will help in picking which path to actually chase. Also please dont bully my wiring plan i never designed it to be universally understood hopefully it still can make sense to you, im a wiring virgin.  1 thing i have just noticed the pressure sensor in question relays both pressure and temperature, the temperature reading holds nice and steady despite the low ecu voltage but the pressure reading is the one that jumps around alot so maybe it is really a pressure issue? wiring plan.xlsx
×
×
  • Create New...