Jump to content
SAU Community

Recommended Posts

Mate I sympathise with you being in a small town, been there done that.

My first thought was it sounds like you have an air leak, have you checked right over all your hoses??? Especially the two on the intercooler? They can split under the outter cover and be a royal pain to find.

Can you hear any strange noises? other than the actual engine running poor?

Mate I sympathise with you being in a small town, been there done that.

My first thought was it sounds like you have an air leak, have you checked right over all your hoses??? Especially the two on the intercooler? They can split under the outter cover and be a royal pain to find.

Can you hear any strange noises? other than the actual engine running poor?

Yep checked them all... did the water trick when it's running, just a thought could it be the timing belt has skiped a tooth? making the time way out?

Ok, so no air leaks. But overfuelling still? Next thing to check is the AFM's.

There are two problems with GTR AFM'S as far as I'm aware.

1: The actual loom connector where it plugs onto the AFM. The pins loose their tension causing various, constant or intermitent problems. I had this, took a little while to track down. It would start running rough, smoking etc, so I could pull over, wriggle the connector and you can hear the engine change note.

These connectors are not available from Nissan, some of the SAU supporters sell them. In my case I was working at an importer at the time, Subaru use the same STYLE connector, so I used better condition pins from a subaru connector and joined into the car's loom. Have done over 30,000km with no problem since.

2: The other problem is under the top cover of the AFM there are solder joints where the pins are soldered. With the weight of the connector on them these can fail. There is a thread on SAU showing how to do this. It is quite simple.

Have a look at these two things before stressing yourself out.

Ok, so no air leaks. But overfuelling still? Next thing to check is the AFM's.

There are two problems with GTR AFM'S as far as I'm aware.

1: The actual loom connector where it plugs onto the AFM. The pins loose their tension causing various, constant or intermitent problems. I had this, took a little while to track down. It would start running rough, smoking etc, so I could pull over, wriggle the connector and you can hear the engine change note.

These connectors are not available from Nissan, some of the SAU supporters sell them. In my case I was working at an importer at the time, Subaru use the same STYLE connector, so I used better condition pins from a subaru connector and joined into the car's loom. Have done over 30,000km with no problem since.

2: The other problem is under the top cover of the AFM there are solder joints where the pins are soldered. With the weight of the connector on them these can fail. There is a thread on SAU showing how to do this. It is quite simple.

Have a look at these two things before stressing yourself out

Cheers. can i solder the wires directly to the AFM to test it out? Not wise?

I've actually seen people use individual socket terminals that fit the afm pins then silicon the whole thing up! I personally would never do something like that.

I actually tested mine, I used a couple of paper clips to back probe the afm's with a multimeter when the car was running. My signals were way out of spec, thats what lead me down the afm path.

I cant remember what the specs were and what terminals to test. Its in the workshop manual. I can get it for you tomorrow.

Another thing that can cause similar issues, but it would be constant, is if the fuel pressure reg seized shut, But I'd be checking the AFMs first.

agreed with the self diagnostic check, which is how i knew my AFM were causing an intermitent problem.

do a search and find the link, + a list of the codes.

from memory and this is assuming you have the same single led rear ecu (mines 89')...

remove passenger side kick panel

undo ecu

turn screw on rear of ecu all the way to the right

turn on ignition, wait 2 seconds

turn screw all the way back counter clockwise

the led light on the rear and a light on the dash will flash the code (check with list of codes)

agreed with the self diagnostic check, which is how i knew my AFM were causing an intermitent problem.

do a search and find the link, + a list of the codes.

from memory and this is assuming you have the same single led rear ecu (mines 89')...

remove passenger side kick panel

undo ecu

turn screw on rear of ecu all the way to the right

turn on ignition, wait 2 seconds

turn screw all the way back counter clockwise

the led light on the rear and a light on the dash will flash the code (check with list of codes)

Cheers for that i will try to get to it tonight...

agreed with the self diagnostic check, which is how i knew my AFM were causing an intermitent problem.

do a search and find the link, + a list of the codes.

from memory and this is assuming you have the same single led rear ecu (mines 89')...

remove passenger side kick panel

undo ecu

turn screw on rear of ecu all the way to the right

turn on ignition, wait 2 seconds

turn screw all the way back counter clockwise

the led light on the rear and a light on the dash will flash the code (check with list of codes)

G'day guys. Just wondering if its the same to same on a R32 GTS-t??? Problems with mine.

G'day guys. Just wondering if its the same to same on a R32 GTS-t??? Problems with mine.

UPDATE!

I stripped out the AFM meter to start checking them... as i removed the airbox i notice that the twin turbo pipe was semi loose...

BAM

The twin turbo pipe has a little elbo that sits inbetween the turbo inlet and TT pipe, it had cracked in two and was just sitting on there causing the boost leek and really shit performace. Now to find this part....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • God I love shiny engine parts 🥰 Are you looking for more horsetorques in the mid range? (Smaller cam) Or just more horsetorques every where? (Big heads and bigger revs) Assumption: they were not bought late night shopping on the interwebs after drinking too many beers, which is typically how I pull pins on things......🤣 The evolution of your car is coming along nicely, I sometimes wish I didn't get bored with my cars and keep flipping them, maybe the MX5 will be different  
    • I got the hazards working! Turned out it was disconnected! Indicator stock still isn’t working. I took the steering shroud off and there seems to be a third connection missing I see two small white connectors but they don’t fit the indicator switch unless they need a short lead to convert the connector type. Can someone point me in the direction of the wiring diagram for the indicator switch?   https://share.icloud.com/photos/0e8ReiFSLBVJsTPUKKfA_1IdQ  
    • All of your suspension bushes/bolts etc, should also only ever be tightened when the car is sitting with full weight too.   IE, jack it back up, shove a heap of stuff down so you can lower the wheels onto so the car is "on the ground" but you have room to get under it.   It's why when properly done, you should be able to remove the shock and spring, but the arms won't go to 100% droop. If you don't do the above, you'll destroy your bushes.
    • We have some more genuine Japanese legally decommissioned car number plates in stock 🙂, as well as the plain white 40mm hole cover: Tama 400 No 12-41: https://www.oemsoko.co.jp/products/genuine-decommissioned-japanese-vehicle-number-plate-set-no-1241 Morioka 300 Te 43-58: https://www.oemsoko.co.jp/products/genuine-decommissioned-japanese-vehicle-number-plate-set-te-4358 Plain White 40mm Hole Cover: https://www.oemsoko.co.jp/products/genuine-japanese-vehicle-number-plate-40mm-hole-cover-white There's also a yellow plate for Kei cars with the corresponding yellow 40mm hole cover sold as a set: Tsukuba 581 Ii 64-66: https://www.oemsoko.co.jp/products/genuine-decommissioned-japanese-vehicle-single-number-plate-ii-6466 Also some Skyline 1/43 scale models: 1989 BNR32 Nissan Skyline GT-R (Silver): https://www.oemsoko.co.jp/products/rare-ebbro-oldies-2006-release-bnr32-nissan-skyline-gtr-silver 1989 HCR32 Nissan Skyline GTS-t Type M (Red): https://www.oemsoko.co.jp/products/kyosho-original-1-43-hcr32-nissan-skyline-gts-t-type-m-red
×
×
  • Create New...