F/S 460cc ND Low imp injectors for RB20

[gerryb]

I've got a heap of low impedance 460cc injectors part Number 195500-1350, top feed, fits straight in as replacement for e.g. CA18det injectors etc., fit straight into the RB20 rail, but you would need resistors for each injector, or a single GTR resistor pack, unless you have an aftermarket ECU.

(20cc more flow per injector than GTR injectors) $45each

email to: [email protected]

[WHITE R32]

hey gerry how u doin mate..... its jon here who sold u the vlt pump from toowoomba.... would there injectors fit straight into my rb20det and also will the impedance rating suit the factory computer..... if it sounds all good ill probably take 6 of em off ya hands....

[gerryb]

G'day John,

Mate these injectors fit straight into a CA18det rail, so they'll fit the rail okay, Ca18det's are low impedance, not sure on the RB20, just check on this forum to see if anyone knows, as I don't offhand.

[Clint32]

RB20 are high impendance so you will need to muck around with resistors unless you have a different computer

[gerryb]

Thanks Clint, so Jon you'd either need a GTR resistor pack or to tie in a resistor to each injector.

Gerry

[Skyrine-Dave]

gday mate...

have these injectors been flow tested?

as long as these will fit straight into an rb20det fuel rail i am interested and in Brisbane too.

Let me know if you still have these!

Cheers

Dave

[gerryb]

Dave,

No haven't been flow tested, I got a heap a while back and sold them and had no problems. I can arrange cleaning and flow testing for you for $15 each.

Gerry

[gerryb]

Anyone else?

[Roy]

gerryb, ill throw a few $$$ your way if you can provide a wiring diagram for wiring up these injectors into the std RB20DET ecu loom, using a GTR reisistor pack.

[Skyrine-Dave]

Roy,

Ask someone with a GTR to take a pic of how the resistor pack is installed into their car.

I have bought 6 of these injectors already. They look alright and should do the job nicely. 20cc more than GTR injectors!

Dave

[gerryb]

Roy I have a diagram and explanation for wiring low impedance injectors into a high impedance system. Email me on:

[email protected]

And I will dig it out and send it to you tonight.

Oh and thanks Dave

[WHITE R32]

hey gerry would u please be able to e mail me this diagram aswell please... [email protected] cheers mate...

[gerryb]

Jon,

I'll foward on what I sent to Roy.

Gerry

[WHITE R32]

thanks heaps gerry ill see if i can make sense out of it and ill let u know .....cheers Jon

[gerryb]

No worries Jon. Pity its generic and not specifically related to wiring in a GTR resistor pack, best I could do on short notice.

Gerry

[ISC-Performance]

hey gerry can you send me that pic aswell

[gerryb]

lunaticR32 email me at my private email below, and I will send you pics by return email.

[email protected]

Gerry

[gerryb]

Still got some of these left everybody get the diagrams etc okay?

[KNG-32R]

would they fit an rb26dett

[gerryb]

KNG-32R they certainly will fit a GTR, just straight drop in with correct impedance etc.

[email protected]