Jump to content
SAU Community

R33 Antenna Always Up With New Headunit

Ryan12

By Ryan12,
in Car Audio & Electrical

 Share

Recommended Posts

  • 1 year later...
  • 1 month later...
cR33m Newbie

cR33m

Posted
Posted (edited)

I'm not an electronics expert, and there may be something blindingly obvious I'm missing here, but can't the wire be split and soldered to both the antenna and amp signal wires? The Pioneer manual states the wire to be max. 300ma 12V DC, so it can't be carrying any significant amount other than a signal.

Is there something I'm missing, as I'm about to do an install over the weekend?

Edited by cR33m
89CAL Grand Master

89CAL

Posted
Posted

Yeah you can run the amp and antenna to the wire on the Pioneer units, but the Antenna is always up as long as the head unit is on, not just the radio. Becuase its triggering the amp as well it has to be on as long as the head unit is putting out sound.

And the antenna looks silly when its up on 33's lol thats why mine is disconnected. Still picks up radio stations easily but :)

  • 11 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • CRSKmD
      R32 Sedan - Grip and Drift (have my cake and eat it too build)

      By CRSKmD · Posted

      The 32 still sits untouched with the broken gearbox. So a little off topic but not worth having a whole new thread. The daily starlet has gotten back on the road after 9 months. Suspected blown HeadGasket at a track day resulted in a bit of scope creep rebuild. The motor got a full tear down, pressure testing, machined for MLS HG, ARP head bolts, new bearings, all new seals etc also noticed some fatigue on the stock exhaust manifold so obviously the answer was a steam pipe manifold and highflow turbo. The exhaust was also looking tired with some rust holes. So I got a slightly over kill system made up consisting of Vibrant resonator and muffler with a highflow cat. The new highflow turbo had a larger inlet so instead of adapting the old intake got a case of the might as wells and had a nicer alloy intake made After the run in was finished i bought a (probably considered retro/vintage) EBC becasue "might as well"
    • admS15
      R32 Gtr Long Term Love, Now Project

      By admS15 · Posted

      Pretty stout result. How much boost? Anything left in it?
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Just dropped the car off at MX5 Mania to install the intake plenum and give it a little retune  My impatience hates the waiting game 
    • admS15
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By admS15 · Posted

      SAMSONAS      Just saying      U know and we know U wanna     Just a matter of time....
    • Kinkstaah
      R34 GTR Front Diffuser/Guard Liner questions.

      By Kinkstaah · Posted

      This is kind of what I expected given the use case. I took my liners out for track days too.... It makes me consider just getting a diffuser and not bothering with the arch liners themselves. For the most part I would like to avoid water/mud/jank splashing up from under the car onto the bottom of the engine, lines, wiring, etc etc. (but brake ducts are cool too). Especially given this post on SAU here: Where it's implied you have to cut them because the actual tub is different? Which is pretty damn worrying because that is where the liners rub in a GTR with wider wheels... I definitely won't want to pay $2000 for plastic then cut them up. It also means said wider wheels rub on the tub in a GTT? FML. That said, I have found some evidence someone ran a 295/30/18 without scrubbing these liners. (and by extension.. the tub).
×
×
  • Create New...