Jump to content
SAU Community

Recommended Posts

  • Replies 124
  • Created
  • Last Reply

Top Posters In This Topic

Im not sure. The only thing he said was something about the ECU going back to the battery and not the alternator. The only problem i have is if i winge too much he could easily change a few figures in the ecu and either detune it, or make it a time bomb waiting to happen. I think this time as times in the past when i have been burnt by workshops is to just pay it and never go there again.

Here is the dyno sheets that $1000 of tuning got me.

And it's only running 12psi. They said they pushed the boost up but it didn't make much more power. Does this sound like B/S? The engine has forgies in it and the turbo is bigger than stock with a steel wheel. I have pushed it to 16 psi and it felt like it had much more power than 12psi. And i dont know where they pulled the 168.9kw run out off. it was making 200kw when i got there... The usuall tricks to make the figures look better. So please people that see dyno sheets all the time please tell me what you think about these.

best to list the parts you've got in there and what tune you're running on.

It's one of those things where I think the workshop will be able to justify the bill because of the amount of time spent on your car. But that's why the advice has been to take it to another workshop, because these guys may lack the experience. It could be that they took 5 hours to find a problem that would take another workshop 1 hour. So best to part ways me thinks.

Yea i will NEVER EVER go back to these muppets. I do understand that time is money and yea they could justify there time and the cost. The thing that has pissed me off the most is there was no communication!!! They kept telling me that they will look after me and that it wont cost much at all.

The mods are FMIC, electronic boost controller, turbo has been rebuilt and made bigger and a steel wheel. I think it's rated at 450hp now. bigger fuel pump, haltech interceptor. engine rebuilt with forgies.

Well i paid the bill and picked up the car. So pissed off at the company. But i have to admit the car does run well. Not $2200 worth but it is good. And i found out that dyno time was charged at around $235 and hour

So $235 per hr and they couldnt even find that it had a bad earth proplem???

Do any of you boy's/girl's get pre dyno check's done before your tune???

We do battery, power to coil, power to fuel pump and fuel flow/pressure check's before every run and add it into the bill.

Best to sort these issue's out before you waste 20-30min's to strap it down and end up with no result.

Bet there isnt a person on this site who would not have wasted days trying to find that problem. How many people who have a car that suddenly drops 150kw have a first thorght of "I wonder if the the battery terminal did it"???? The guy probably didnt charge you for half the time he wasted on it trying to diagnose someones else's substandard work. Dont forget that you now have a car that is running sweet and has had everthing on it checked and double checked. Regardless of wether you planned to spent that money or not its not wasted!! Another point to remember is if you change workshops now there is a real good chance that the first time you have a problem your NEW!! workshop will be charging you AGAIN!! to check things that you just paid this guy to do. He on the other hand will be know your car very well. No I do not have a workshop and dont know the car or the workshop from this thread. Just my two cents on a subject where it seems that most of the advise given to you is based on other people knowing everthing and your mechanic supposedly knowing nothing. Niether of these two things are true so try not to judge too unfairly.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I have two German Shepherds that like to bite things that are in places they shouldn't be. Plus the cars/batteries on chargers are inside a locked garage, inside that fully fenced and locked yard. If you can get the car out, you can have it, as I'll be having one hell of a laugh at your expense.
    • Looks like they changed the wording in the manual for the new model. I have a different model. Mine is CC1206. Not CC1206-XLI. Mine doesn't support lithium at all. I can't find the manual for my model online and they don't list the model on the Century website anymore either. In my manual it says what I quoted and that they recommend to not leave it on 🤷‍♂️ Sounds like you'd be fine with this one now.
    • Thanks for actually answering every single point! I noticed the date only after posting. And yes, looks like things have changed a little bit since then. FWIW, looks like Government Gazette No 253 has the current emissions test procedure. Sounds pretty reasonable altogether. One thing I learned from this is that it's possible to check whether a catalyst does any work by measuring the temperature. Catalyst outlet temp is at least 40°C higher than inlet temps if there is a reaction happening. I'd be curious to check this on mine but don't have a thermometer. Because purely going by smell it can't be doing much. Personally I'd be okay to pay for the test as long as it's within reason. My main concern would be to lose my rego because it definitely wouldn't pass the test in its current state. I'll see if I can do a bit more digging and see what's involved in doing this nowadays.   To be fair I don't think it's stopping many people from doing the modifications anyway. It just puts a barrier up to doing things right  
    • Uhhh if anyone sees this - I bought a BRZ years ago, on my fulls soon so back on the market for the R34!
    • Research research research, and tackle the important things first, like the rust, because as a wise old hippie and some crazy horses once said "rust never sleeps" Nothing good comes easy and fast, and nothing that comes easy and fast is typically good
×
×
  • Create New...